HP-ICF-SNMP-MIB Table View

A table of entries used to configure the policy for
selecting source address while sending SNMP response. 
When this entry is configured, the source address field 
in the IP PKT header get modified based on the configured
option. There are 4 valid options that can be configured 
for ipv4 and ipv6 networks
a) rfc1517 
   This is the default behavior if no other policy is
   configured. In this case the source address will be 
   the address of the interface from which packet goes 
   out of the box. 
b) user configured IP address
   In this case the configured address will be used as 
   source address in the SNMP response.
c) user configured interface
   In this case the IP address configured on the specified
   interface will be used as source address in the SNMP 
   response. In case of multinet interface then smallest
   IP address present on the interface in lexicographical 
   order will be used as source address while sending
   SNMP responses for requests.
d) dst_ip_of_request
   In this case, the destination IP address present in 
   the IP header of received SNMP request will be used 
   as source address in the SNMP response.

hpicfSnmpResponseSourceAddrPolicyEntry row .1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1

An entry in the table, containing information about
a single source address. This table allows only 2 values
that can be used as index to this table. These are:
1) hpicfSnmpResponseSourceAddressType = ipv4
Where user…

Indexes

hpicfSnmpResponseSourceAddressType

Column	Syntax	OID
hpicfSnmpResponseSourceAddressType We allow only 2 values for this object as an index for hpicfSnmpResponseSourceAddrPolicyEntry - 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure the source address type used while sending…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.1
hpicfSnmpResponseSourceAddrPolicy This specifies the policy for selecting the source address for outgoing SNMP responses. a) rfc1517 This is the default behavior if no other policy is configured. In this case the source address will be the address…	Enumerationr/w Enumerated Values: 1 rfc1517 2 configuredIP 3 configuredInterface 4 dstIpOfRequest	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.2
hpicfSnmpResponseSourceAddress This object is used to set the IP address which will be used as source IP while sending the SNMP response. This object should be used in conjunction with the hpicfSnmpResponseSourceAddressType and hpicfSnmpResponseSo…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.3
hpicfSnmpResponseSourceAddrIfIndex This object is used to set the interface whose IP address will be used as source IP while sending the SNMP response. This object should be used in conjunction with the hpicfSnmpResponseSourceAddressType and hpicfSnmpR…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.4

A table of entries used to configure the source address 
used while generating SNMP Traps. When this entry is 
configured, the source address field in the IP PKT header 
get modified based on the configured option.

hpicfSnmpTrapSourceAddrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1

An entry in the table, containing information about
a single source address. This table allows only 2 values
that can be used as index to this table. These are:
1) hpicfSnmpResponseSourceAddressType = ipv4
Where user…

Indexes

hpicfSnmpTrapSourceAddressType

Column	Syntax	OID
hpicfSnmpTrapSourceAddressType This table allows only 2 values that can be used as index to this table. These are: 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure the source address used while sending the SNMP TRAPs on …	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.1
hpicfSnmpTrapSourceAddrPolicy This specifies the policy for selecting the source address for outgoing SNMP responses. a) rfc1517 This is the default behavior if no other policy is configured. In this case the source address will be the address…	Enumerationr/w Enumerated Values: 1 rfc1517 2 configuredIP 3 configuredInterface 4 dstIpOfRequest	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.2
hpicfSnmpTrapSourceAddress This object is used to set the IP address which will be used as source IP while sending the SNMP TRAPs. This object should be used in conjunction with the hpicfSnmpResponseSourceAddressType and hpicfSnmpTrapSourceAdd…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.3
hpicfSnmpTrapSourceAddrIfIndex This object is used to set the interface whose IP address will be used as source IP while sending the SNMP TRAPs. This object should be used in conjunction with the hpicfSnmpResponseSourceAddressType and hpicfSnmpTrapS…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.4