HP-ICF-SERVICE-TUNNEL-MIB Table View

Table containing information on service tunnels. These are
class of IP tunnels that can be used to encapsulate Ethernet
frames along with the MAC and VLAN headers.

hpicfServiceTunnelEntry row .1.3.6.1.4.1.11.2.14.11.5.1.100.1.2.1

An entry containing the information on a particular service
tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfServiceTunnelType This object is used to configure the service tunnel type. A value of none(0) indicates that this is not a service tunnel. A value of intercept(1) indicates that the service tunnel type is i…	Enumerationr/w Enumerated Values: 0 none 1 intercept 2 tap	.1.3.6.1.4.1.11.2.14.11.5.1.100.1.2.1.1
hpicfServiceTunnelName This object is used to assign a textual name to the tunnel interface.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.100.1.2.1.2

Table containing information on service tunnels. These are  
IP tunnels that can be used to encapsulate Ethernet frames
along with the MAC and VLAN headers.

hpicfServiceTunnelIfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.100.1.3.1

An entry containing the information on a particular service
tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfServiceTunnelIfMTU The size of the largest packet which can be sent or received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.100.1.3.1.1
hpicfServiceTunnelInterfaceStatus This object indicates the operational state of the tunnel interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.11.2.14.11.5.1.100.1.3.1.2
hpicfServiceTunnelInterfaceDownReason If the tunnelinterface state is DOWN, this object indicates the reason for which it is down.	Enumeration Enumerated Values: 0 notApplicable 1 resourceUnavailable 2 noRouteToDestination 3 ifAdminDown	.1.3.6.1.4.1.11.2.14.11.5.1.100.1.3.1.3
hpicfServiceTunnelInterfaceTruncate Enables partial payloads to be sent on the Tap tunnels in case of MTU violations.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.14.11.5.1.100.1.3.1.4

Table containing statistics information on service 
tunnels. Service Tap tunnels are uni-directional  
and will not receive packets. Hence the MIB objects 
for Rx Statistics are not applicable for Tap tunnels
and will always be 0.

hpicfServiceTunnelStatsIfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1

An entry containing statistics information on a
particular service tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfServiceTunnelStatsRxPackets Number of packets received on the tunnel interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1.1
hpicfServiceTunnelStatsTxPackets Number of packets transmitted out of the tunnel interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1.2
hpicfServiceTunnelStatsRxHeartbeat Number of heartbeat packets received on the tunnel interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1.3
hpicfServiceTunnelStatsTxHeartbeat Number of heartbeat packets transmitted out of the tunnel interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1.4
hpicfServiceTunnelLastHeartbeatPacketTimestamp The value of 'SysUpTime' correspondign to last heartbeat packet that was received on this tunnel.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1.5
hpicfServiceTunnelStatsClear This object clears tunnel interface statistics when set to TRUE. A GET request for this object always returns FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.100.2.2.1.6