HP-ICF-POE-MIB Table View

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPsePortEntry row .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1

The fields in these entries will be used to supplement
fields in 'pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfPoePethPsePortCurrent This field specifies the current supplied at this port. This value is specified in milli amperes(mA).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1
hpicfPoePethPsePortVoltage This field specifies the Voltage supplied at this port. This value is specified in 10's of volts (dV)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2
hpicfPoePethPsePortPower This field specifies the Power supplied at this port. This value is specified in milliwatts (mW).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3
hpicfPoePethPsePortPowerAllocateBy This field specifies the power allocation method for this port. The default value is usage.	Enumerationr/w Enumerated Values: 1 usage 2 class 3 value	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4
hpicfPoePethPsePortPowerValue This field specifies the power allocation defined for this port. This value is specified in Watts (W).	Integer32r/w Constraints: range: 0-17	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5
hpicfPoePethPsePortLLDPDetect This field specifies if power should be allocated using LLDP advertised information regarding the PD.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6
hpicfPoePethPsePortPoePlusPowerValue This field specifies the power allocation defined for this port. Use this object for equipment supporting high power, that is greater than 15 Watts. This value is specified in Watts (W). This object may only be read …	WattsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7
hpicfPoePethPsePortActualPower This field specifies the actual power drained by the device connected to this port.	milli-wattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8
hpicfPoePethPsePortOperStatus This field specifies the operational status of the port	Enumeration Enumerated Values: 1 deny 2 off 3 on	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9
hpicfPoePethPsePortPowerMode This field specifies the power mode of the port whether enabled or disabled or disableWithFiber	Enumeration Enumerated Values: 1 enable 2 disable 6 disableWithFiber	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.10
hpicfPoePethPsePortAveragePower This field specifies the average power supplied to this port which is used by the device connected to it.	wattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.11
hpicfPoePethPsePortPeakPower This field specifies the peak power supplied to this port which is used by the device connected to it.	wattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.12
hpicfPoePethPsePortPreStdDetect This field specifies the pre standard detect status for this port. A value of On - indicates that power pre-802.3af-standard devices. A value of Off - indicates that only pre-802.3af/at compliant devices are allowed.…	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.13
hpicfPoePethPsePortLowPriority This object indicates whether a particular port shuts down in the event of any PSU failure in the system. A value of (1) indicates a low priority port which shuts down in the event of any PSU failure. A value of (2) ind…	Enumeration Enumerated Values: 1 low 2 high	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.14
hpicfPoePethPsePortResetState This object is used to reset the PoE controller HW to which the port is associated.	Enumerationr/w Enumerated Values: 0 noreset 1 reset	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.15
hpicfPoePethPsePortPowerType This field specifies the PD type determined during physical layer classification. The default value is -1.	Enumeration Enumerated Values: -1 type0 1 type1 2 type2 3 type3 4 type4	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16
hpicfPoePethPsePortForceTwoPairMode This field specifies the force two pair mode status for this port.This applies only on devices that support 4 pair POE. A value of On - indicates that force two pair mode has been enabled for this port. A value of Off -…	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.17

This table describes the features of each power source
equipment (PSE). On standalone switches (both stackable
and chassis switches) there shall be only one entry in
this table. In a stack, there shall be one entry for
each stack member.

hpicfPseFeaturesEntry row .1.3.6.1.4.1.11.2.14.11.1.9.1.6.1

A row in the PSE features table, signifying a single
power source equipment.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpicfPseAllowPreStdDetectdeprecated This object is used to configure the default POE power detection mode for this power source equipment. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - indicates that only pre-802…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.1
hpicfPsePowerRedundancy This object is used to configure the POE power redundancy mode for this power source equipment. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that …	Enumerationr/w Enumerated Values: 1 none 2 nPlus1 3 full	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2
hpicfPseExtPwrSupplyCount This object is used to configure the number of external power supplies expected to be connected to the Power Source Equipment. The default value is 1.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.3
hpicfPseAvailablePower This field specifies the total power available on this Power source equipment. This includes internal and external power supplies.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.4
hpicfPseUsedPower This field specifies the total power allocated on the Power Source Equipment. This is the sum of the power allocated to all the ports on the PSE.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.5
hpicfPseFailoverPower This field specifies the failover power for this Power Source Equipment.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.6
hpicfPseRedundantPower This field specifies the redundancy POE power available to the Power Source Equipment.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.7
hpicfPseCurrentPowerDraw This field specifies the redundancy POE power available to the Power Source Equipment.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.8

This table contains one row per power supply available 
to the switch.

hpicfPoePowerSupplyEntry row .1.3.6.1.4.1.11.2.14.11.1.9.1.7.1

Information about a particular power supply. Each entry
provides information about power supply whether it is
external or internal, if it is poe/poePlus and the
capacity of the power supply.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpicfPoePowerSupplySourceType This field specifies whether the power supply is external or internal. Stackable switch has inbuilt power supply and can have upto 1 external power supply. Chassis switch can have upto 2 internal power supplies for 6 s…	Enumeration Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.1
hpicfPoePowerSupplyType This field specifies the type of the power supply, poe or poePlus.	Enumeration Enumerated Values: 1 poe 2 poePlus 3 notPresent 4 fault 5 auxFault	.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.2
hpicfPoePowerSupplyCapacity This field specifies the capacity of the power supply.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.3
hpicfPoePowerSupplyAuxCapacity This MIB object specifies the capacity of the auxiliary power supply. The power supplies other than the model J9830A returns the value NULL.	WattsInteger32 Constraints: range: 0-10000	.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.4

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPseOperStateEntry row .1.3.6.1.4.1.11.2.14.11.1.9.1.8.1

The fields in these entries will be used to supplement
fields in 'pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfPoePethPseOperState This field specifies the operation status. The default value is on.	Enumeration Enumerated Values: 1 poeOn 2 poePlusOn 3 off 4 fault	.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.1
hpicfPoePethPsePortNum This field specifies the port number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.2
hpicfPoePethMainPsePdPowerDraw This field specifies the total actual power that is used by all the ports on this slot or member.	WattsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.3

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPsePowerEntry row .1.3.6.1.4.1.11.2.14.11.1.9.1.11.1

The fields in these entries will be used to supplement
fields in pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfPoePethPsePeakPower This field specifies the peak power of the PSE.	WattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.1
hpicfPoePethPseAvgPower This field specifies the average power of the PSE.	WattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.2
hpicfPoePethPseRemGrntPower Guaranteed remaining power of PSEs	WattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.3

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPseFourPairPortEntry row .1.3.6.1.4.1.11.2.14.11.1.9.1.12.1

The fields in these entries will be used to supplement
fields in 'pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfpethPsePortPDSignature This Signature value represents the PD signature. This variable is valid only while a PD is detected. The meaning of the signature labels is defined in the IEEE specification.	Enumeration Enumerated Values: 0 unknownSignature 1 singleSignature 2 dualSignature	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.1
hpicfpethPsePortDetectionStatusA Describes the operational status of the port PD detection. A value of deliveringPowerAltA - indicates that the PSE State diagram is in the state POWER_ON_PRI if alt_pri='a', or the state POWER_ON_SEC if alt_pri='b'. A v…	Enumeration Enumerated Values: 0 unknown 1 searchingAltA 2 deliveringPowerAltA 3 faultAltA	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.2
hpicfpethPsePortDetectionStatusB Describes the operational status of the port PD detection. A value of deliveringPowerAltB - indicates that the PSE State diagram is in the state POWER_ON_SEC if alt_pri='a', or the state POWER_ON_PRI if alt_pri='b'. A v…	Enumeration Enumerated Values: 0 unknown 1 searchingAltB 2 deliveringPowerAltB 3 faultAltB	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.3
hpicfpethPsePortPowerClassificationA Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4 6 class5	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.4
hpicfpethPsePortPowerClassificationB Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4 6 class5	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.5
hpicfpethPsePortAssignedClass Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4 6 class5 7 class6 8 class7 9 class8	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.6
hpicfpethPsePortPLCClass Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4 6 class5 7 class6 8 class7 9 class8	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.7
hpicfpethPsePortPLCClassA Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4 6 class5	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.8
hpicfpethPsePortPLCClassB Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4 6 class5	.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.9