HP-ICF-IP-LOCKDOWN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
8

hpicfIpLockPortTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.2 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpLockPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-IP-LOCKDOWN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortTable' 
Per-interface configuration for Dynamic IP
Lockdown.
hpicfIpLockPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.2.1
Dynamic IP Lockdown configuration information
for a single port.
Indexes
Column Syntax OID
hpicfIpLockPortEnable
This object indicates whether this port is
enabled for Dynamic IP Lockdown.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.2.1.1

hpicfIpLockPortStatusTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpLockPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-IP-LOCKDOWN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortStatusTable' 
Per-interface status for Dynamic IP
Lockdown.
hpicfIpLockPortStatusEntry row .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1
Dynamic IP Lockdown status information for
a single port.
Indexes
Column Syntax OID
hpicfIpLockPortOperStatus
This object indicates the various states of the
current operating mode of Dynamic IP Lockdown on
this port. When no bits are set, the status of
this feature shall be 'disabled'. Each status is
described below:
acti…
Bits
Enumerated Values:
0active
1noDsnoop
2trustedPort
3noSnoopingVlan
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1.1

hpicfIpLockAddrTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpLockAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-IP-LOCKDOWN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrTable' 
Table of source address bindings on ports
where Dynamic IP Lockdown is active that
are currently permitted.
hpicfIpLockAddrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1
An entry in the table containing a single
permitted source address binding.
Indexes
Column Syntax OID
hpicfIpLockAddrPort
The port that this address binding is
permitted on.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.1
hpicfIpLockAddrType
The type of IP address contained in
hpicfIpLockAddrIpAddress. The only
values expected are ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.2
hpicfIpLockAddrIpAddress
A source IP address permitted on this
port. The type of address contained in
this object is indicated by
hpicfIpLockAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.3
hpicfIpLockAddrVlan
The VLAN ID on which this source address
is permitted on this port.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.4
hpicfIpLockAddrMacAddress
The source MAC address that is permitted
for this source IP address on this port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.5
hpicfIpLockResourceAvailable
TRUE indicates that resources were available
to add binding. FALSE indicates that resources
were not available
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.6