HP-ICF-GENERIC-RPTR Table View

Table containing security configuration for each
port.

hubSecurePortEntry row .1.3.6.1.4.1.11.2.14.2.10.1.1

An entry in the hubSecurePortTable, containing
the security configuration for a single port.

Indexes

hubSecPtGroupIndex hubSecPtPortIndex

Column	Syntax	OID
hubSecPtGroupIndex This object identifies the group containing the port for which this entry contains security configuration information.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.1.1.1
hubSecPtPortIndex This object identifies the port within the group for which this entry contains security configuration information.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.1.1.2
hubSecPtSecurityAddress The desired authorized MAC address for this port. This can be either a regular station address to configure a specific address, or it can be one of the following special values to specify the address learning method: …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.2.10.1.1.3
hubSecPtAuthorizedAddress The MAC address of the station authorized to be on this port. This address could either have been configured by specifying a regular station address for hubSecPtSecurityAddress, or it could have been learned by the age…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.2.10.1.1.4
hubSecPtPreventEavesdrop If enabled, unicast packets not addressed to the authorized address for this port will be scrambled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.2.10.1.1.5
hubSecPtAlarmEnable If enabled, the agent will generate an intrusionTrap if a packet is received on this port with a source MAC address that is different from the hubSecPtAuthorizedAddress for this port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.2.10.1.1.6
hubSecPtIntrusionFlag This flag indicates if an intrusion has occurred on this port. The Security LED on the hub will blink if any instance of this flag has the value intrusion. Setting this flag to noIntrusion will turn off the Security L…	Enumerationr/w Enumerated Values: 1 intrusion 2 noIntrusion	.1.3.6.1.4.1.11.2.14.2.10.1.1.7

This table contains a record of the twenty most
recent port security violations.  The first entry
in the table is the oldest.

hubIntruderLogEntry row .1.3.6.1.4.1.11.2.14.2.10.2.1

A row in the hubIntruderLogTable containing
information about a single port security
violation.

Indexes

hubIntruderIndex

Column	Syntax	OID
hubIntruderIndex The index of this entry in the intruder log table. Index 1 will always contain the oldest entry. If the table is full when a new intrusion occurs, the new entry becomes index 20, and all earlier entries are shifted do…	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.11.2.14.2.10.2.1.1
hubIntruderGroup This object identifies the group containing the port on which this intrusion occurred.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.2.10.2.1.2
hubIntruderPort This object identifies the port within the group on which this intrusion occurred. A port number of zero indicates that this entry is unused and the values for the other variables in this entry are undefined.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.2.10.2.1.3
hubIntruderAddress This object contains the source MAC address of the intruder.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.2.10.2.1.4
hubIntruderTime The value of sysUpTime when the intrusion occurred. This will be zero if the agent has been reset since the intruder was detected, since sysUpTime could be misinterpreted in that case.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.11.2.14.2.10.2.1.5
hubIntruderType This object identifies the type of violation that occured: address, training, or both. The hubIntruderTrainingViolation object will indicate additional information, if any, on the type of training violation. This obje…	Enumeration Enumerated Values: 1 address 2 training 3 both 4 none	.1.3.6.1.4.1.11.2.14.2.10.2.1.6
hubIntruderTrainingViolation This object indicates the type of training violation. Note that for 802.3 ports, this object will always be equal to 'noViolation'. This object will be equal to 'noViolation' if this log entry is unused.	Enumeration Enumerated Values: 1 noViolation 2 promiscuousViolation 3 repeaterViolation	.1.3.6.1.4.1.11.2.14.2.10.2.1.7

Table containing security configuration
for each port, where security for multiple
MAC addresses per port is desired (e.g.,
switch systems).

hpSecurePortEntry row .1.3.6.1.4.1.11.2.14.2.10.3.1

An entry in the hpSecurePortTable, containing
the security configuration for a single port.

Indexes

hpSecPtGroupIndex hpSecPtPortIndex

Column	Syntax	OID
hpSecPtGroupIndex This object identifies the group containing the port for which this entry contains security configuration information. On repeater systems, this can be used to identify a specific repeater within a managed stack of rep…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.3.1.1
hpSecPtPortIndex This object identifies the port within the group for which this entry contains security configuration information. On a switch system, this index corresponds to the ifIndex of the port.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.3.1.2
hpSecPtAddressLimitdeprecated This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. Changing the limit while in these modes clears any addresses …	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.11.2.14.2.10.3.1.3
hpSecPtLearnMode This object identifies the learning mode of the port. The modes are as follows: LearnContinuous. The port can learn all new MAC addresses. When a new address is learned, it is stored in a manner su…	Enumerationr/w Enumerated Values: 1 learnContinuous 2 learnFirstN 3 learnFirstNConditionally 4 configureSpecific 5 learn8021xAuthorized 6 learnLimitedContinuous	.1.3.6.1.4.1.11.2.14.2.10.3.1.4
hpSecPtPreventEavesdropdeprecated If enabled on a switch, outbound unknown unicast packets will not be forwarded out this port. If enabled on a repeater, outbound unknown unicast packets for this port will be scrambled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.2.10.3.1.5
hpSecPtAlarmEnable This object identifies the action taken when an intrusion occurs. See hpSecPtLearnMode for what constitutes an intrusion. disable. No trap is sent and the port remains enabled. SendTrap. If the hpSecP…	Enumerationr/w Enumerated Values: 1 disable 2 sendTrap 3 sendTrapAndDisablePort	.1.3.6.1.4.1.11.2.14.2.10.3.1.6
hpSecPtIntrusionFlag This flag indicates if an intrusion has occured on this port. Security-related LED(s) on the device will blink if any instance of this flag has the value intrusion. Setting this flag to noIntrusion will turn off the a…	Enumerationr/w Enumerated Values: 1 intrusion 2 noIntrusion	.1.3.6.1.4.1.11.2.14.2.10.3.1.7
hpSecPtAddressLimit2 This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. The current maximum limit is 64. Changing the limit while in t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.2.10.3.1.8

Table containing multiple configured authorized
addresses per port.  Facilitates security
for ports whose hpSecPtLearnMode is set to
configureSpecific.

hpSecureCfgAddrEntry row .1.3.6.1.4.1.11.2.14.2.10.4.1

An entry in the hpSecureCfgAddrTable, containing
the configured authorized address for a single
port. Entries are stored in nonvolatile memory
when either the hpSecPtrLearnMode for the port
is changed to configureSpeci…

Indexes

hpSecCfgAddrGroupIndex hpSecCfgAddrPortIndex hpSecCfgAddress

Column	Syntax	OID
hpSecCfgAddrGroupIndex This object identifies the group containing the port for which this entry contains the configured authorized address. On repeater systems, this can be used to identify a specific repeater within a managed stack of repe…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.4.1.1
hpSecCfgAddrPortIndex This object identifies the port within the group for which this entry contains the configured authorized address. On a switch, this index corresponds to the ifIndex of the port.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.4.1.2
hpSecCfgAddress A specific authorized MAC address for this port configured by a management station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.2.10.4.1.3
hpSecCfgStatus The row status of a hpSecureCfgAddrEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.2.10.4.1.4

Table containing the authorized addresses for
each port.  An authorized address is an address
learned while the hpSecPtLearnMode for the port
is set to learnContinuous, learnFirstN, 
learnLimitedContinuous, or learnFirstNConditionally;  
or an address in the hpSecureCfgAddrTable when the 
hpSecPtLearnMode for the port is set to configureSpecific.
On a switch, for ports whose hpSecPtLearnMode
is set to learnContinuous or learnLimitedContinuous, 
this table may return MAC address information based 
on the switch's 802.1d forwarding database.

hpSecureAuthAddrEntry row .1.3.6.1.4.1.11.2.14.2.10.5.1

An entry in the hpSecureAuthAddrTable,
containing the authorized address for a single
port. Entries are stored in nonvolatile memory
except when the port's hpSecPtLearnMode is set
to learnContinuous or learnLimitedCont…

Indexes

hpSecAuthAddrGroupIndex hpSecAuthAddrPortIndex hpSecAuthAddress

Column	Syntax	OID
hpSecAuthAddrGroupIndex This object identifies the group containing the port for which this entry contains authorized address information. On repeater systems, this can be used to identify a specific repeater within a managed stack of repeate…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.5.1.1
hpSecAuthAddrPortIndex This object identifies the port within the group for which this entry contains authorized address information. On a switch, this index corresponds to ifIndex of the port.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.2.10.5.1.2
hpSecAuthAddress The MAC address of the station authorized to be on this port. See hpSecureAuthAddrTable for the definition of 'authorized address'.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.2.10.5.1.3

A table containing generic information about the
current logical repeaters in this managed system.

hpGRpRepeaterEntry row .1.3.6.1.4.1.11.2.14.11.4.1.1.2.1

An entry in the table, containing information about
a single logical repeater.

Indexes

hpGRpRepeaterIndex

Column	Syntax	OID
hpGRpRepeaterIndex This object uniquely identifies the logical repeater in the managed system for which this entry contains information. This object will have the same value as the corresponding 'repeater index' object in the media-speci…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.1
hpGRpRepeaterIfIndex The interface on the agent that is used to transmit and receive packets through this repeater. The ifEntry identified by this value is the same entry identified by the same value of the ifIndex object. The value zero i…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.2
hpGRpRepeaterName A friendly name for this repeater. Management applications can use this to configure a user friendly name for this logical repeater.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.3
hpGRpRepeaterVlanIndex The virtual LAN that this repeater is on. Note that setting this object does not affect the operation of the repeater in any way. It is a 'notepad' for management applications to allow them to record which VLAN on a c…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.4

A table of backup link configuration entries.  For
a given backup link, the agent will periodically send
a test packet to the device at the specified address.
If no response is received after a configured number
of test packets are sent, the agent will enable the
backup port and disable the primary port, and will
stop sending periodic test packets.  After the agent
has switched to the backup link, the primary port
will need to explicitly be re-enabled via management
action in order to return to using the primary port.
          
At any time, a management station can examine the
associated instance of the hpicfBackupLinkState
object to determine if the backup port is currently
in use.
          
The backup link algorithm enables and disables the
backup port by modifying the instance of the
rptrPortAdminStatus object corresponding to that
port.  After the backup port has been enabled by the
backup link algorithm, if the primary port is
subsequently enabled via management action, the
backup port will be turned off and the periodic
test packets will resume.
          
When a row of this table is activated, the backup
port will be disabled, the primary port will be
enabled, and the periodic test packets will be sent.
The time between test packets is configurable using
the associated instance of the
hpicfBackupLinkTestTime object.  The number of
failures needed to switch to the backup port is
configurable using the associated instance of the
hpicfBackupLinkConsecFailures object.  The backup
link function can be disabled by setting the relevant
instance of the hpicfBackupLinkStatus object to
either 'notInService' or 'destroy'.
          
Note that the primary port for a backup link must
be mapped to a repeater segment that the agent is
capable of transmitting through.  In addition, a
given port cannot be used in more than one active
backup link at the same time.

hpicfBackupLinkEntry row .1.3.6.1.4.1.11.2.14.11.4.2.2.1

A row in the table, containing information about a
single backup link.

Indexes

hpicfBackupLinkIndex

Column	Syntax	OID
hpicfBackupLinkIndex The value of this object uniquely identifies this backup link.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.1
hpicfBackupLinkPrimaryGroup The group containing the primary port for this backup link.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.2
hpicfBackupLinkPrimaryPort The port number within the group of the primary port for this backup link.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.3
hpicfBackupLinkBackupGroup The group containing the backup port for this backup link.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.4
hpicfBackupLinkBackupPort The port number within the group of the backup port for this backup link.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.5
hpicfBackupLinkAddress The MAC address of the device to which periodic test packets are sent in order to determine if the primary link is operational.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.6
hpicfBackupLinkTestTime The frequency, in seconds, between sending periodic test packets. The test packet response timeout is fixed at 500ms.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.7
hpicfBackupLinkConsecFailures The number of consecutive test packet failures which will cause the agent to switch to the backup port (i.e., backup port turned on, primary port turned off). A value of one is generally not recommended and will cause …	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.8
hpicfBackupLinkState The current state of this backup link. One of the following values: notActive - backup link not running because this row has not yet been made active usin…	Enumeration Enumerated Values: 1 notActive 2 usingPrimary 3 usingBackup	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.9
hpicfBackupLinkFailEventIndex The index of the eventEntry in the RMON MIB that will be triggered whenever the value of hpicfBackupLinkState changes from 'usingPrimary' to 'usingBackup'. The eventEntry identified by a particular value of this index …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.10
hpicfBackupLinkStatus The status of this entry. This object may not be set to 'active' unless the corresponding instance of hpicfBackupLinkAddress has been set to a valid unicast address, the corresponding instances of hpicfBackupLinkPrimar…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.4.2.2.1.11

A table for configuring segment-to-repeater mapping
for repeater segments in this managed system.

hpGRpPMSegmentEntry row .1.3.6.1.4.1.11.2.14.11.4.3.1.1

An entry in the table, containing mapping
information about a single repeater segment.

Indexes

hpGRpPMSegmentIndex

Column	Syntax	OID
hpGRpPMSegmentIndex The value of an instance of this object uniquely identifies a physical repeater segment in this managed system. The value of an instance of this object will be equal to the instance of the Entity MIB's entPhysicalIndex…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.1.1.1
hpGRpPMCurrentRptrIndex The index of the repeater that this segment is currently connected to. Changing this value has the effect of moving all ports on this segment to a different repeater. The hpGRpPMSegAllowedRptrTable should be consulted…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.1.1.3

This table is used to inform a management
application about which repeaters a physical segment
is able to be connected to.  There is one row in this
table for each allowable segment-to-repeater
connection.

hpGRpPMSegAllowedRptrEntry row .1.3.6.1.4.1.11.2.14.11.4.3.2.1

A row in the table, containing a single allowable
segment-to-repeater connection. The presence of a
row indicates that the segment identified by
hpGRpPMSegmentIndex can be mapped to the repeater
identified by hpGRpPMSe…

Indexes

hpGRpPMSegmentIndex hpGRpPMSegAllowedRptrIndex

Column	Syntax	OID
hpGRpPMSegAllowedRptrIndex The repeater index that identifies a repeater that this segment is able to be connected to.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.2.1.1

A table for configuring port-to-repeater mapping
for repeater ports in this managed system.

hpGRpPMPortEntry row .1.3.6.1.4.1.11.2.14.11.4.3.3.1

An entry in the table, containing mapping
information about a single repeater port.

Indexes

hpGRpPMPortGroupIndex hpGRpPMPortIndex

Column	Syntax	OID
hpGRpPMPortGroupIndex The group containing the port for which this entry contains mapping information.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.3.1.1
hpGRpPMPortIndex The port within the group for which this entry contains mapping information.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.3.1.2
hpGRpPMPortEntPhysicalIndex This object indicates which entry in the Entity MIB's entPhysicalTable represents this port. The entPhysicalEntry identified by this value is the same entry identified by the same value of the entPhysicalIndex object.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.3.1.3
hpGRpPMPortCurrentRptrIndex The index of the repeater that this port is currently mapped to. Changing this value has the effect of moving this port to a different repeater. The hpGRpPMPortAllowedRptrTable should be consulted to determine which re…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.3.1.4

This table is used to inform a management
application about which repeaters a logical port is
able to be mapped to.  There is one row in this table
for each allowable port to repeater mapping.

hpGRpPMPortAllowedRptrEntry row .1.3.6.1.4.1.11.2.14.11.4.3.4.1

A row in the table, containing a single allowable
port to repeater mapping. The presence of a row
indicates that the port identified by
hpGRpPMPortGroupIndex, hpGRpPMPortIndex can be
mapped to the repeater identified b…

Indexes

hpGRpPMPortGroupIndex hpGRpPMPortIndex hpGRpPMPortAllowedRptrIndex

Column	Syntax	OID
hpGRpPMPortAllowedRptrIndex The repeater index that identifies a repeater that this port is able to be mapped to.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.4.3.4.1.1

A table of switches, both internal and external,
connected to ports in this repeater system.
Typically, internal switches are added by the agent
and cannot be removed by a management operation.
External switches may be added or removed by
management operations using the hpicfGRpSwitchStatus
object.

hpicfGRpSwitchEntry row .1.3.6.1.4.1.11.2.14.11.4.5.1.1

An entry in the table, representing a single
attached switch.

Indexes

hpicfGRpSwitchIndex

Column	Syntax	OID
hpicfGRpSwitchIndex An index used to uniquely identify this switch.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.11.2.14.11.4.5.1.1.1
hpicfGRpSwitchType This object indicates whether this switch is an internal switch card or a switch external to the repeater system. This object will always be equal to 'external' for rows that are created using hpicfGRpSwitchStatus. Fo…	Enumeration Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.11.2.14.11.4.5.1.1.2
hpicfGRpSwitchEntPhysicalIndex For an internal switch, this object is the index in the entPhysicalTable for the internal switch card. For an external switch, the value of this object will be zero.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.4.5.1.1.3
hpicfGRpSwitchLinkCount The number of links from this switch's ports to repeater ports in this repeater system. For internal switches, this object cannot be modified by a network management operation. For an external switch, when this object…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.4.5.1.1.4
hpicfGRpSwitchStatus The status of this hpicfGRpSwitchEntry. An entry may not exist in the active state unless the associated instance of the hpicfGRpSwitchLinkCount has been set to a non-zero value, and all associated instan…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.4.5.1.1.5

A table of links to switch ports for both internal
and external switches that are connected to repeater
ports in this repeater system.

hpicfGRpSwitchLinkEntry row .1.3.6.1.4.1.11.2.14.11.4.5.2.1

An entry in the table, representing a single link
to a switch port.

Indexes

hpicfGRpSwitchIndex hpicfGRpSwitchLinkIndex

Column	Syntax	OID
hpicfGRpSwitchLinkIndex An identifier that uniquely identifies this switch link among all of the links associated with this switch. The values of this object are numbered consecutively from 1 to the value of the instance of the hpicfGRpSwitch…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.11.2.14.11.4.5.2.1.1
hpicfGRpSwitchLinkRptrGroup The group containing the repeater port to which this switch link is attached. For internal switches, this object may not be modified by a network management operation. For external switches, an instance of this object…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.4.5.2.1.2
hpicfGRpSwitchLinkRptrPort The repeater port within the group to which this switch link is attached. For internal switches, this object may not be modified by a network management operation. For external switches, an instance of this object wil…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.4.5.2.1.3
hpicfGRpSwitchLinkState This object indicates whether this switch link is enabled ('active') or disabled ('redundant') due to one of the following: - There are more links to this switch than there are repeater segments…	Enumerationr/w Enumerated Values: 1 active 2 redundant	.1.3.6.1.4.1.11.2.14.11.4.5.2.1.4