HP-ICF-FAULT-FINDER-MIB Table View

This table contains one entry per fault type
that this agent is capable of monitoring.

hpicfFfControlEntry row .1.3.6.1.4.1.11.2.14.11.1.7.1.1

Configuration information for a particular fault
type.

Indexes

hpicfFfControlIndex

Column	Syntax	OID
hpicfFfControlIndex The type of fault for which this entry contains configuration information.	HpicfFaultType Type Values: 1 badDriver 2 badXcvr 3 badCable 4 tooLongCable 5 overBandwidth 6 bcastStorm 7 partition 8 misconfiguredSQE 9 polarityReversal 10 networkLoop 11 lossOfLink 12 portSecurityViolation 13 backupLinkTransition 14 meshingFault 15 fanFault 16 rpsFault 17 stuck10MbFault 18 lossOfStackMember 19 hotSwapReboot 20 duplexMismatchHDX 21 duplexMismatchFDX 22 flowcntlJumbosFault 23 portSelftestFailure 24 xcvrUnidentified 25 xcvrUnsupported 26 crfNotify 27 crfThrottled 28 crfBlocked 29 xcvrNotYetSupported 30 xcvrBRevOnly 31 xcvrNotSupportedOnPort 32 phyReadFailure 33 linkFlap 34 intel82566dmportprotect 35 xcvrExceedQty 36 xcvrClone 37 xcvrCloneReminder 38 bcastStormPerPort 39 linkFlapPerPort 40 rxNonStdPreamble 41 mcastStorm 42 mcastStormPerPort	.1.3.6.1.4.1.11.2.14.11.1.7.1.1.1
hpicfFfAction This object is used to configure the action, if any, to be taken if a fault of this type is detected by the agent. Setting an instance of this object to 'none' will clear any previous state of the associated fault on al…	HpicfFaultActionr/w Type Values: 1 none 2 warn 3 warnAndDisable 4 warnAndSpeedReduce 5 warnAndSpeedReduceAndDisable	.1.3.6.1.4.1.11.2.14.11.1.7.1.1.2
hpicfFfWarnTolerance The tolerance level used to calculate the fault warning threshold for this fault type. The agent will periodically check relevant statistics for each port for each type of fault. If the warning threshold …	HpicfFaultTolerancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.1.7.1.1.3
hpicfFfDisablePortTolerance The tolerance level used to calculate the port disable threshold for this fault type. The value of an instance of this object MUST be greater than the value of the corresponding instance of the hpicfFfWarnTolerance. …	HpicfFaultTolerancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.1.7.1.1.4
hpicfFfSpeedReduceTolerance The tolerance level used to calculate the speed reduction threshold for this fault type. The value of an instance of this object MUST be greater than the value of the corresponding instance of the hpicfFfWarnTolerance, …	HpicfFaultTolerancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.1.7.1.1.5

A log of fault warnings and ports disabled by
the Fault Finder.

hpicfFfLogEntry row .1.3.6.1.4.1.11.2.14.11.1.7.2.1

An entry in the Fault Finder log, containing
information about a single fault.

Indexes

hpicfFfLogIndex

Column	Syntax	OID
hpicfFfLogIndex An arbitrary value which uniquely identifies this log entry. The index for a particular log entry must not change, even though entries with lower valued indices have been deleted.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.1
hpicfFfLogCreateTime The value of sysUpTime when this log entry was added to the hpicfFfLogTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.2
hpicfFfLogPhysEntity The entPhysicalIndex of the device port or other physical component on which the fault was detected. On agents which do not implement the Entity MIB, this will contain the ifIndex of the offending port.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.3
hpicfFfLogFaultType The type of fault which was detected on the physical entity indicated by hpicfFfLogPhysEntity.	HpicfFaultType Type Values: 1 badDriver 2 badXcvr 3 badCable 4 tooLongCable 5 overBandwidth 6 bcastStorm 7 partition 8 misconfiguredSQE 9 polarityReversal 10 networkLoop 11 lossOfLink 12 portSecurityViolation 13 backupLinkTransition 14 meshingFault 15 fanFault 16 rpsFault 17 stuck10MbFault 18 lossOfStackMember 19 hotSwapReboot 20 duplexMismatchHDX 21 duplexMismatchFDX 22 flowcntlJumbosFault 23 portSelftestFailure 24 xcvrUnidentified 25 xcvrUnsupported 26 crfNotify 27 crfThrottled 28 crfBlocked 29 xcvrNotYetSupported 30 xcvrBRevOnly 31 xcvrNotSupportedOnPort 32 phyReadFailure 33 linkFlap 34 intel82566dmportprotect 35 xcvrExceedQty 36 xcvrClone 37 xcvrCloneReminder 38 bcastStormPerPort 39 linkFlapPerPort 40 rxNonStdPreamble 41 mcastStorm 42 mcastStormPerPort	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.4
hpicfFfLogAction The action, if any, that was taken by the agent when this fault was detected.	HpicfFaultAction Type Values: 1 none 2 warn 3 warnAndDisable 4 warnAndSpeedReduce 5 warnAndSpeedReduceAndDisable	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.5
hpicfFfLogSeverity The severity level of the fault. Port disables will always be logged as 'critical'. An agent may need to remove faults from the fault log in order to reclaim resources. If so, it must remove lower sever…	Enumeration Enumerated Values: 1 informational 2 medium 3 critical	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.6
hpicfFfLogStatus Log entries will initially be created with the value 'new'. A manager cannot set this object to 'new'. Setting this object to 'active' indicates that the fault has been displayed to a user. Setting this object to 'old…	Enumerationr/w Enumerated Values: 1 new 2 active 3 old	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.7
hpicfFfLogPhysClass The PhysicalClass as defined by Entity MIB to which this hpicfFfLogPhysIndex belongs.	ENTITY-MIBPhysicalClass Type Values: 1 other 2 unknown 3 chassis 4 backplane 5 container 6 powerSupply 7 fan 8 sensor 9 module 10 port 11 stack 12 cpu	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.8
hpicfFfLogInfoType This field can be used to indicate the class of information that 'hpicfFfLogInfo' holds	Enumeration Enumerated Values: 1 ipv4Address 2 displayString	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.9
hpicfFfLogInfo This can be used to hold any relevant information about the current fault	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.1.7.2.1.10

This table provides information about Broadcast Storm 
control configuration of all ports.

hpicfFfBcastStormControlPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1

This object provides information about Broadcast Storm
Control configuration of each port.

Indexes

hpicfFfBcastStormControlPortIndex

Column	Syntax	OID
hpicfFfBcastStormControlPortIndex The ifIndex value which uniquely identifies a row in the Interfaces Table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.1
hpicfFfBcastStormControlMode The Broadcast Storm Control mode of a port. A value of disable (1) indicates that no rising threshold value is set for broadcast storm traffic on this port. A value of bcastRisingLevelpercent (2) indicates that the ris…	Enumerationr/w Enumerated Values: 1 disabled 2 bcastRisingLevelpercent 3 bcastRisingLevelpps	.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.2
hpicfFfBcastStormControlRisingpercent This is the rising threshold Level in percent of bandwidth of the port. hpicfFfBcastStormControlAction occurs when broadcast traffic reaches this level.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.3
hpicfFfBcastStormControlRisingpps This object indicates the rising threshold for Broadcast Storm Control. This value is in packets-per-second of received broadcast traffic. hpicfFfBcastStormControlAction object takes action when broadcast traffic reac…	Integer32r/w Constraints: range: 1-10000000	.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.4
hpicfFfBcastStormControlAction This object defines the action taken by the switch when a broadcast storm occurs on a port. A value of none (1) indicates that no action is performed. A value of warn (2) indicates that an event is logged when broadcas…	Enumerationr/w Enumerated Values: 1 none 2 warn 3 warnAndDisable	.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.5
hpicfFfBcastStormControlPortDisableTimer This object specifies the time period for which the port remains in disabled state. A port is disabled when broadcast traffic reaches the threshold value set on that port. This time period is specified in seconds. The …	secondsUnsigned32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.6

This table provides information about Link Flapping 
control configuration of all ports.

hpicfFfLinkFlapControlPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.1.7.6.1.1

This object provides information about Link Flapping
Control configuration of each port.

Indexes

hpicfFfLinkFlapControlPortIndex

Column	Syntax	OID
hpicfFfLinkFlapControlPortIndex The ifIndex value which uniquely identifies a row in the Interfaces Table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.1
hpicfFfLinkFlapControlSensitivity The Link Flapping Control sensitivity of a port. A value of low (1) indicates that the sensitivity of the link flap threshold is set to 10 link flaps per 10 second interval. A value of medium (2) indicates that the se…	Enumerationr/w Enumerated Values: 0 none 3 high 6 medium 10 low	.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.2
hpicfFfLinkFlapControlAction This object defines the action taken by the switch when link flaps occurs on a port. A value of none (1) indicates that no action is performed. A value of warn (2) indicates that an event is logged when the number of l…	Enumerationr/w Enumerated Values: 1 none 2 warn 3 warnAndDisable	.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.3
hpicfFfLinkFlapControlPortDisableTimer This object specifies the time period for which the port remains in disabled state. A port is disabled when the number of link flaps reaches the threshold rate set on that port. This time period is specified in second…	secondsUnsigned32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.4

This table provides information about Multicast Storm 
Control configuration of all ports.

hpicfFfMcastStormPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1

This object provides information about Multicast Storm
Control configuration of each port.

Indexes

hpicfFfMcastStormPortIndex

Column	Syntax	OID
hpicfFfMcastStormPortIndex The ifIndex value which uniquely identifies a row in the Interfaces Table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.1
hpicfFfMcastStormMode The Mroadcast Storm Control mode of a port. A value of disable (1) indicates that no rising threshold value is set for multicast storm traffic on this port. A value of mcastRisingLevelpercent (2) indicates that the ris…	Enumerationr/w Enumerated Values: 1 disabled 2 mcastRisingLevelpercent 3 mcastRisingLevelpps	.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.2
hpicfFfMcastStormRisingpercent This is the rising threshold Level in percent of bandwidth of the port. hpicfFfMcastStormControlAction occurs when multicast traffic reaches this level.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.3
hpicfFfMcastStormRisingpps This object indicates the rising threshold for Multicast Storm Control. This value is in packets-per-second of received multicast traffic. hpicfFfMcastStormControlAction object takes action when multicast traffic reac…	Integer32r/w Constraints: range: 1-10000000	.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.4
hpicfFfMcastStormAction This object defines the action taken by the switch when a multicast storm occurs on a port. A value of none (1) indicates that no action is performed. A value of warn (2) indicates that an event is logged when multicas…	Enumerationr/w Enumerated Values: 1 none 2 warn 3 warnAndDisable	.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.5
hpicfFfMcastStormPortDisablTimer This object specifies the time period for which the port remains in disabled state. A port is disabled when multicast traffic reaches the threshold value set on that port. This time period is specified in seconds. The …	secondsUnsigned32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.6