HP-ICF-FAULT-FINDER-MIB

        This MIB module contains object definitions for
managing the Fault Finder feature in web-capable
HP devices.
    
Source file
HP-ICF-FAULT-FINDER-MIB
Last revised
Identity
hpicfFaultFinderMib
Base OID
1.3.6.1.4.1.11.2.14.10.2.12
Imported Objects
ENTITY-MIB PhysicalClass PhysicalIndex
HP-ICF-OID hpicfCommon hpicfCommonTrapsPrefix hpicfObjectModules
IF-MIB ifIndex InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TimeStamp
Net-SNMP examples using the hp MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-ICF-FAULT-FINDER-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-FAULT-FINDER-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (51)
.1.3.6.1.4.1.11.2.14.10.2.12
.1.3.6.1.4.1.11.2.14.10.2.12.1
.1.3.6.1.4.1.11.2.14.10.2.12.1.1
.1.3.6.1.4.1.11.2.14.10.2.12.1.2
.1.3.6.1.4.1.11.2.14.11.1.7
.1.3.6.1.4.1.11.2.14.11.1.7.1
.1.3.6.1.4.1.11.2.14.11.1.7.1.1
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.1
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.2
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.3
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.4
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.5
.1.3.6.1.4.1.11.2.14.11.1.7.2
.1.3.6.1.4.1.11.2.14.11.1.7.2.1
Integer32
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.1
OctetString
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.10
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.2
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.3
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.4
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.5
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.6
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.7
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.8
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.9
.1.3.6.1.4.1.11.2.14.11.1.7.3
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.4
.1.3.6.1.4.1.11.2.14.11.1.7.5
.1.3.6.1.4.1.11.2.14.11.1.7.5.1
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.1
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.2
Integer32
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.3
Integer32
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.4
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.5
secondsUnsigned32
.1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.6
.1.3.6.1.4.1.11.2.14.11.1.7.6
.1.3.6.1.4.1.11.2.14.11.1.7.6.1
.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1
.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.1
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.2
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.3
secondsUnsigned32
.1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.4
.1.3.6.1.4.1.11.2.14.11.1.7.7
.1.3.6.1.4.1.11.2.14.11.1.7.7.1
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.1
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.2
Integer32
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.3
Integer32
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.4
Enumeration
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.5
secondsUnsigned32
.1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.6
Dependencies (11) 6 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (4)
Enumeration
none(1)
warn(2)
warnAndDisable(3)
warnAndSpeedReduce(4)
warnAndSpeedReduceAndDisable(5)
Integer32 range: 0..255
Enumeration
badDriver(1)
badXcvr(2)
badCable(3)
tooLongCable(4)
overBandwidth(5)
bcastStorm(6)
partition(7)
misconfiguredSQE(8)
polarityReversal(9)
networkLoop(10)
lossOfLink(11)
portSecurityViolation(12)
backupLinkTransition(13)
meshingFault(14)
fanFault(15)
rpsFault(16)
stuck10MbFault(17)
lossOfStackMember(18)
hotSwapReboot(19)
duplexMismatchHDX(20)
duplexMismatchFDX(21)
flowcntlJumbosFault(22)
portSelftestFailure(23)
xcvrUnidentified(24)
xcvrUnsupported(25)
crfNotify(26)
crfThrottled(27)
crfBlocked(28)
xcvrNotYetSupported(29)
xcvrBRevOnly(30)
xcvrNotSupportedOnPort(31)
phyReadFailure(32)
linkFlap(33)
intel82566dmportprotect(34)
xcvrExceedQty(35)
xcvrClone(36)
xcvrCloneReminder(37)
bcastStormPerPort(38)
linkFlapPerPort(39)
rxNonStdPreamble(40)
mcastStorm(41)
mcastStormPerPort(42)
OctetString range: 0..255
Conformance Groups (8)
A collection of objects for configuring the
Fault Finder feature.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.1
A collection of objects for accessing the log of
discovered faults.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.2
A collection of notifications used to indicate
the discovery of a network fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.3
A collection of objects for configuring the
Fault Finder feature, including the ability
to reduce a port's media speed in the event
of a fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.4
A collection of objects used to indicate
fault status.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.5
A collection of objects for configuring the
Fault Finder broadcast storm feature on a per
per port basis, including the ability
to disable a port in the event of a fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.6
A collection of objects for configuring the
Fault Finder Link Flap feature on a per
per port basis, including the ability
to disable a port in the event of a fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.7
A collection of objects for configuring the
Fault Finder multicast storm feature on a per
per port basis, including the ability
to disable a port in the event of a fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.8
Compliance Statements (6)

OID .1.3.6.1.4.1.11.2.14.10.2.12.1.1.1
The compliance statement for devices
implementing the HP Fault Finder capability.
Required groups
Object refinements
ObjectAccessSyntaxDescription
hpicfFfAction
Support for 'warnAndDisable' is not required
on devices that do not support the optional
port disable capability.
hpicfFfDisablePortTolerance readonly
Write access to this object is not required
on devices that do not support the optional
port disable capability.

OID .1.3.6.1.4.1.11.2.14.10.2.12.1.1.2
The compliance statement for devices
implementing the HP Fault Finder capability.
Required groups
Object refinements
ObjectAccessSyntaxDescription
hpicfFfAction
Support for 'warnAndDisable' is not required
on devices that do not support the optional
port disable capability.
hpicfFfDisablePortTolerance readonly
Write access to this object is not required
on devices that do not support the optional
port disable capability.
hpicfFfSpeedReduceTolerance readonly
Write access to this object is not required
on devices that do not support the optional
speed reduction capability.

OID .1.3.6.1.4.1.11.2.14.10.2.12.1.1.3
The compliance statement for devices
implementing the switch fault status.
Required groups

OID .1.3.6.1.4.1.11.2.14.10.2.12.1.1.4
The compliance statement for devices
implementing the HP Fault Finder capability.
Required groups

OID .1.3.6.1.4.1.11.2.14.10.2.12.1.1.5
The compliance statement for devices
implementing the HP Fault Finder capability.
Required groups

OID .1.3.6.1.4.1.11.2.14.10.2.12.1.1.6
The compliance statement for devices
implementing the HP Fault Finder capability.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.11.2.14.12.1.0.5
This notification is sent whenever the Fault
Finder creates an entry in the hpicfFfLogTable.