HP-ICF-DHCPv6-SNOOP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
8
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfDSnoopV6AuthorizedServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DHCPv6-SNOOP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DHCPv6-SNOOP-MIB::hpicfDSnoopV6AuthorizedServerTable'
Table of authorized DHCP server addresses.
hpicfDSnoopV6AuthorizedServerEntry row .1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1
A row in the table, containing the address of a
single authorized DHCP server.
Column Syntax OID
The IP address type of authorized DHCPv6 server.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1.1
The address of a known valid DHCP server. The type of address
contained in this object is indicated by
hpicfDSnoopV6AuthorizedServerAddrType. To allow a server packet
to be forwarded to a client, it must be received o…
OctetString
Constraints:
range: 16-16
range: 20-20
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1.2
The status of this DHCP server address entry.
Only 'active' entries are used when validating
DHCP server packets. Row statuses createAndWait(5),
notReady(3) and notInService(2) are not supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1.3
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfDSnoopV6PortMaxBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DHCPv6-SNOOP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DHCPv6-SNOOP-MIB::hpicfDSnoopV6PortMaxBindingTable'
This table contains the maximum binding information of port.
hpicfDSnoopV6PortMaxBindingEntry row .1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3.1
The maximum number of bindings on the Port.
Indexes
No indexes recorded
Column Syntax OID
This object indicates the static bindings configured on this port.
Unsigned32
Constraints:
range: 0-8192
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3.1.2
This object indicates the number of dynamic bindings on this port.
Unsigned32
Constraints:
range: 0-8192
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3.1.3
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfDSnoopV6StaticBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DHCPv6-SNOOP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DHCPv6-SNOOP-MIB::hpicfDSnoopV6StaticBindingTable'
This table contains the VLAN ID for binding entry.
hpicfDSnoopV6StaticBindingEntry row .1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1
Extension of VLAN ID in hpicfSaviObjectsBindingTable.
Indexes
No indexes recorded
Column Syntax OID
The VLAN on which this client is discovered.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1.1
The VLAN on which this client is discovered.
OctetStringr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1.2
The secondary VLAN on which this client is discovered.
if binding is learned on primary or normal VLAN, this object
will be zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1.3