HP-ICF-DEV-CONF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
36

hpSwitchDevProfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1 · 1 row entry · 15 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchDevProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchDevProfTable' 
The device profile configuration table.
hpSwitchDevProfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1
The device profile configuration entry.
Indexes
Column Syntax OID
hpSwitchProfIndex
The index value which uniquely identifies a row
in the profile table.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.1
hpSwitchProfRowStatus
The row status of this device profile entry. Allows
creation/deletion of the device profile entry. Row cannot
be deleted if the device profile is associated with a
device.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.2
hpSwitchProfName
The name of the device profile. The maximum length
supported is 32 characters.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.3
hpSwitchProfUntaggedVlanID
The untagged VLAN ID associated with this profile.
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.4
hpSwitchProfTaggedVlanList
The set of tagged VLANs associated with this profile.
HP-ICF-TCVidListr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.5
hpSwitchProfIngressBandwidth
The bandwidth percentage of ingress traffic allowed on
the port associated with this profile.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.6
hpSwitchProfEgressBandwidth
The bandwidth percentage of egress traffic allowed on
the port associated with this profile.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.7
hpSwitchProfCosPriority
The Class of Service (CoS) priority for traffic entering
the port associated with this profile.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.8
hpSwitchProfPortSpeed
The port speed configuration associated with this profile.
Enumerationr/w
Enumerated Values:
1halfDuplex10Mbits
2halfDuplex100Mbits
3fullDuplex10Mbits
4fullDuplex100Mbits
5autoNeg
6fullDuplex1000Mbits
7auto10Mbits
8auto100Mbits
9auto1000Mbits
10auto10Gbits
11auto10or100Mbits
12auto40Gbits
13auto2500Mbits
14auto5000Mbits
15auto2500or5000Mbits
16auto1000or2500Mbits
17auto1000or2500or5000Mbits
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.9
hpSwitchProfPoeMaxPower
The maximum power allocation measured in watts (W) for
the port associated with this profile. This value must be
less than or equal to 33W.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.10
hpSwitchProfPoePriority
The PoE priority defined for the port associated with this
profile.
Enumerationr/w
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.11
hpSwitchProfJumboFrameSupport
The jumbo frame support status for the port
associated with this profile. Applying a
profile with jumbo frame support enabled
will also enable jumbo frame support for
all other member ports of all VLANs the
port i…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.12
hpSwitchProfTunneledNodeSupport
Configuration parameter to (dis)allow tunneled node
configuration on port when device profile is
applied.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.13
hpSwitchProfMode
Configure the mode for the profile.
Enumerationr/w
Enumerated Values:
1clientMode
2portMode
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.14
hpSwitchProfPoeAllocateBy
PoE Allocation method defined for port associated
with this profile.
Enumerationr/w
Enumerated Values:
1usage
2class
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.15

hpSwitchDevAssociationTable

table deprecated
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchDevAssociationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationTable' 
The device association configuration table.
This table has deprecated because it has only 
hpSwitchDevAssociationType as index.This index 
can not differentiate different device under 
same hpSwitchDevAssociationType.
hpSwitchDevAssociationEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1
The device association configuration entry.
Indexes
Column Syntax OID
hpSwitchDevAssociationTypedeprecated
The type of the auto-configurable device.
HpPartnerDeviceType
Type Values:
1none
2arubaAccessPoint
3arubaBridgeRouter
4hpBridgeRouter
5ciscoBridgeRouter
6ciscoPhone
7scsWanCpe
8deviceIdentity
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.1
hpSwitchDevAssociationProfNamedeprecated
The name of the profile associated with this device.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.2
hpSwitchDevAssociationProfIDdeprecated
The ID of the profile associated with this device.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.3
hpSwitchDevAssociationStatusdeprecated
The auto-configuration feature status for this device-type.
By default, the status is disabled. If enabled, the profile
configuration is applied.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.4

hpSwitchRogueDevMacTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchRogueDevMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevMacTable' 
The MAC entry table for any rogue AP device.
hpSwitchRogueDevMacEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3.1
The MAC entry for the rogue AP device.
Indexes
Column Syntax OID
hpSwitchRogueDevMacAddress
The MAC address of rogue AP device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3.1.1
hpSwitchNeighborDevMacAddress
The MAC address of the access point that detected the rogue
AP device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3.1.2

hpSwitchWhitelistMacTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.4 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchWhitelistMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchWhitelistMacTable' 
The rogue AP device whitelist table. MAC addresses added
to this table are not considered to be rogue devices.
hpSwitchWhitelistMacEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.4.1
The whitelist table entry.
Indexes
Column Syntax OID
hpSwitchWhitelistMacAddress
The MAC address of whitelisted AP device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.4.1.1
hpSwitchWhitelistRowStatus
The row status of rogue AP whitelist table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.4.1.2

hpSwitchDevPortTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.5 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchDevPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchDevPortTable' 
The table shows per-port connected devices and any 
profiles associated with them.
hpSwitchDevPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1
The table entry showing the device connected to this
port and any profile associated with it.
Indexes
Column Syntax OID
hpSwitchDevPortIndex
Index of the interface on this switch.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.1
hpSwitchDevPortType
The type of partner device connected to this port.
HpPartnerDeviceType
Type Values:
1none
2arubaAccessPoint
3arubaBridgeRouter
4hpBridgeRouter
5ciscoBridgeRouter
6ciscoPhone
7scsWanCpe
8deviceIdentity
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.2
hpSwitchDevPortProfName
The name of the profile associated with the partner
device connected to this port.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.3
hpSwitchDevPortDeviceName
The name of partner device connected to this port.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.4

hpSwitchDevIdentAssociationTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.6 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchDevIdentAssociationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchDevIdentAssociationTable' 
The device association configuration table.
hpSwitchDevIdentAssociationEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1
The device association configuration entry for device.
Indexes
Column Syntax OID
hpSwitchDevIdentAssociationType
The type of the auto-configurable device.
HpPartnerDeviceType
Type Values:
1none
2arubaAccessPoint
3arubaBridgeRouter
4hpBridgeRouter
5ciscoBridgeRouter
6ciscoPhone
7scsWanCpe
8deviceIdentity
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.1
hpSwitchDevIdentAssociationSubType
This mib is use to differentiate device under same
hpSwitchDevIdentAssociationType. Combination of
hpSwitchDevIdentAssociationType and this OID uniquely
identifies a row in the device association table.
…
Unsigned32
Constraints:
range: 1-20
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.2
hpSwitchDevIdentAssociationRowStatus
The row status of this device association entry. Allows
creation/deletion of the device association entry.

For device type 'deviceidentity(8)' row cannot be create
if the device is not found in device-i…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.3
hpSwitchDevIdentAssociationProfName
The name of the profile associated with this device.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.4
hpSwitchDevIdentAssociationProfID
The ID of the profile associated with this device.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.5
hpSwitchDevIdentAssociationStatus
The auto-configuration feature status for this device-type.
By default, the status is disabled. If enabled, the profile
configuration is applied.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.6
hpSwitchDevIdentAssociationDeviceType
Device type ID which will be use by profile manager.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.6.1.7

hpSwitchAllowlistMacTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.7 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpSwitchAllowlistMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DEV-CONF-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DEV-CONF-MIB::hpSwitchAllowlistMacTable' 
The rogue AP device allowlist table. MAC addresses added
to this table are not considered to be rogue devices.
hpSwitchAllowlistMacEntry row .1.3.6.1.4.1.11.2.14.11.5.1.126.4.7.1
The allowlist table entry.
Indexes
Column Syntax OID
hpSwitchAllowlistMacAddress
The MAC address of allowlisted AP device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.7.1.1
hpSwitchAllowlistRowStatus
The row status of rogue AP allowlist table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.126.4.7.1.2