HP-ICF-BRIDGE Table View

A table that contains information about the
GVRP port configurations on this switch.

hpicfBridgeGvrpPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1

GVRP information associated with a single port.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfBridgeGvrpRestrictedVlanReg Controls GVRP's ability to learn new VLANs on this port. When set to 'false', GVRP will accept JOIN requests for new VLANs on this port. When set to 'true', GVRP will only process protocol packets that concern themsel…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1

A table that contains information about the
GVRP state Machine(s) configuration.

hpicfBridgeGvrpStateMachineEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1

A row in a table, containing the VLAN ID and Portlist.

Indexes

hpicfGenericVlanId IF-MIBifIndex

Column	Syntax	OID
hpicfGenericVlanId The VLAN ID to which this entry belongs.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.1
hpicfApplicantStateMachine This MIB provides the Applicant State Machine values of the GVRP enabled port as follows,0 = va, 1 = aa,2 = qa, 3 = la,4 = vp,5 = ap,6 = qp,7 = vo,8 = ao,9 = qo,10 = lo, 11 = von,12 = aon,13 = qon. Whereas, the first …	Enumeration Enumerated Values: 0 va 1 aa 2 qa 3 la 4 vp 5 ap 6 qp 7 vo 8 ao 9 qo 10 lo 11 von 12 aon 13 qon	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2
hpicfRegistarStateMachine This MIB provides the Registrar state machine value for the GVRP enabled port as follows,0 = inn,1 = lv,2 = l3,3 = l2, 4 = l1,5 = mt,6 = inr,7 = lvr,8 = l3r,9 = l2r,10 = l1r,11 = mtr, 12 = inf,13 = lvf,14 = l3f,15 = l2…	Enumeration Enumerated Values: 0 inn 1 lv 2 l3 3 l2 4 l1 5 mt 6 inr 7 lvr 8 l3r 9 l2r 10 l1r 11 mtr 12 inf 13 lvf 14 l3f 15 l2f 16 l1f 17 mtf	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.3

A table that contains information about STP configuration on all ports.

hpicfBridgeRstpPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1

An entry in the hpicfBridgeRstpPortTable which holds the information of STP
configuration of a port. An entry is available for each port in this table.

Indexes

hpicfBridgeRstpPortIndex

Column	Syntax	OID
hpicfBridgeRstpPortIndex The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1
hpicfBridgeRstpAdminEdgePort Indicate that port is connected to LAN segment that don't have any bridge connected to it	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2
hpicfBridgeRstpOperEdgePort Reflects the value of the operEdgePort parameter, as defined by the operation of the Bridge Detection state machine (Clause 18 of P802.1t). The value of this parameter is used by a Designated Port in order to determine…	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3
hpicfBridgeRstpAdminPointToPointMac forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that …	Enumerationr/w Enumerated Values: 1 forceTrue 2 forceFalse 3 auto	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4
hpicfBridgeRstpOperPointToPointMac true: This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connec…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5
hpicfBridgeRstpPortPathCost The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost…	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6
hpicfBridgeRstpForceBpduMigrationCheck When operating in RSTP version 2 or later, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object always returns FALSE(2) when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7
hpicfBridgeRstpAutoEdgePort This object determines the identification of edge ports. When set to TRUE, it is used by the bridge detection state machine for automatic identification of edge ports. The default value is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8
hpicfBridgeRstpPortBpduFiltering This objects determines the BPDU filtering on ports. When set to TRUE, the port does not transmit any BPDU and all the received BPDUs are dropped. When set to FALSE, all the BPDUs are processed normally. The default …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9

Per-interface configuration for Loop Protection.

hpicfBridgeLoopProtectPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1

Loop Protection configuration information for
a single port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpicfBridgeLoopProtectPortEnable This object indicates whether the Loop Protection is enabled on a port. The default value is FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1
hpicfBridgeLoopProtectPortLoopDetected This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's hpicfBridgeLoopProtectPortEnable is set to FALSE.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2
hpicfBridgeLoopProtectPortLastLoopTime The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3
hpicfBridgeLoopProtectPortLoopCount This object provides the number of loops detected on a Loop Protection enabled port. The value of this object is set to zero when Loop Protection is disabled on a port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4
hpicfBridgeLoopProtectPortReceiverAction Controls the action taken when a Loop Protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet is disabled. When set to 'noDisable' the transmitting port is…	LoopProtectReceiverActionr/w Type Values: 1 disableTx 2 noDisable 3 disableTxRx 4 disableRx	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5
hpicfBridgeLoopDetectedVlan Refers to this object for the port on which loop is detected.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6

This table contains mirror session information 
related to a given specified destination. A mirror 
session is a group of one or more portCopyEntries 
all having the same specified destination. A given
specified destination may be associated with more
then one mirror session.

hpicfBridgeMirrorSessionEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1

An entry in the hpicfBridgeMirrorSessionEntry contains
mirror session specific identification
information.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfBridgeMirrorSessionID This variable is valid only for mirroring transfers. It allows mirroring destinations to be grouped. A given hpicfBridgeMirrorSessionID can only be used with 1 destination. However, multiple sources may be related to th…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1
hpicfBridgeDontTagWithVlan This objects determines whether to include IEEE 802.1Q tag in the mirrored copy of the packet. When the value of this object is set to 1 ('enabled'), the IEEE 802.1Q VLAN tag is not included in the mirr…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2
hpicfBridgeMirrorSessionType This oid mentions what is the source type of traffic associated with mirror session. noMirror Not associated with any mirroring. mirrorAddresses Mirror traffic based on addresses mirrorPolicies Mirror traffic ba…	Enumerationr/w Enumerated Values: 1 noMirror 2 mirrorAddresses 3 mirrorPolicies 4 mirrorPorts 5 mirrorVlan	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3

An HP proprietary extension to the dot1qVlanStaticTable to 
configure a Voice VLAN.

hpicfBridgeVoiceVlanConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1

An entry for HP Specific extension table.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfBridgeVoiceVlanEnable Labels the VLAN as a Voice VLAN which allows to separate, prioritize, and authenticate voice traffic moving through the network.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1

This table contains the jumbo frame configuration of
all interfaces.

hpicfBridgeJumboInterfaceConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1

An entry in the hpicfBridgeJumboInterfaceConfigTable, which contains
the jumbo frame configuration of an interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpicfBridgeJumboInterfaceEnable This object enables or disables the support for jumbo frames. This configuration is supported only on VLAN interfaces.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1

This table contains objects for configuring interface as
Management interface.

hpicfBridgeManagementInterfaceConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1

An entry in the hpicfBridgeManagementInterfaceConfigEntry
contains objects for configuring interface as management
interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpicfBridgeManagementInterfaceEnable This object configures a VLAN as a Secure Management VLAN. When the value of this object is set to TRUE, a VLAN acts as a Secure Management VLAN. The default value of this object is FALSE for all VLANs. For VLAN with V…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1