HP-ICF-BRIDGE
This MIB module contains HP proprietary
extensions to the standard Bridge MIBs.
- Source file
HP-ICF-BRIDGE- Last revised
- Identity
hpicfBridge- Base OID
1.3.6.1.4.1.11.2.14.11.5.1.12
Imported Objects
| BRIDGE-MIB | dot1dBasePortEntry |
| HP-ICF-FTRCO | VidList |
| HP-ICF-OID | hpSwitch |
| HP-ICF-TC | ConfigStatus |
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | dot1qVlanStaticEntry VlanId VlanIndex |
| SMON-MIB | portCopyEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the hp MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-ICF-BRIDGE' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-ICF-BRIDGE::hpicfBridge'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-BRIDGE' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-BRIDGE::hpicfBridge'
Objects (76)
Showing 76 of 76 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.11.2.14.11.5.1.12 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.2 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.3 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.4 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6.1 |
|
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6.2 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.1 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.2 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.4 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.3 |
Dependencies (21) 10 direct · 11 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- HP-ICF-OIDhp
- P-BRIDGE-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- Q-BRIDGE-MIBrfc
- HP-ICF-FTRCOhp
- HP-ICF-TChp
- SMON-MIBrfc
- HP-ICF-BRIDGEhpselected
Type Definitions (2)
| OctetString |
range: 8 |
|
| Enumeration |
disableTx(1)noDisable(2)disableTxRx(3)disableRx(4) |
Conformance Groups (16)
|
Basic VLAN configuration information that is not
in the standard 802.1Q Bridge MIB. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.1
|
|
|
hpicfBridgeGvrpPortGroup
deprecated
|
********* THIS GROUP IS DEPRECATED *********
GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated. This object has been deprecated and replaced with hpicfBridgeGvrpPortGroup1 |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.2
|
|
hpicfBridgeRstpForceVersion hpicfBridgeRstpConfigStatus hpicfBridgeRstpProtocolVersion hpicfBridgeRstpAdminStatus
Rapid Spanning Tree Protocol (RSTP) configuration
information that is in neither the standard 802.1w MIB, nor the standard 802.1d (STP) MIB. Note that as RSTP improves compatibility, some objects in this MIB will likely be deprecated. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.3
|
|
|
hpicfBridgeLoopProtectInterval hpicfBridgeLoopProtectEnableTimer hpicfBridgeLoopProtectTrapLoopDetectEnable hpicfBridgeLoopProtectPortEnable hpicfBridgeLoopProtectPortLoopDetected hpicfBridgeLoopProtectPortLastLoopTime hpicfBridgeLoopProtectPortLoopCount hpicfBridgeLoopProtectPortReceiverAction
A collection of objects providing basic instrumentation
and control of the HP Loop protection entity. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.4
|
|
|
A collection of objects providing identification
of a mirroring session entity. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.5
|
|
|
A collection of objects for voice configuration
on vlan. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.7
|
|
|
A collection of objects providing Jumbo configuration
on a interface. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.8
|
|
|
A collection of objects for management interface
configuration. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.9
|
|
|
A collection of objects providing support for Loop Protect
per VLAN feature. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.10
|
|
|
hpicfBridgeRstpAdminEdgePort hpicfBridgeRstpOperEdgePort hpicfBridgeRstpAdminPointToPointMac hpicfBridgeRstpOperPointToPointMac hpicfBridgeRstpPortPathCost hpicfBridgeRstpForceBpduMigrationCheck hpicfBridgeRstpAutoEdgePort hpicfBridgeRstpPortBpduFiltering
A collection of objects providing support for Rstp.
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.11
|
|
|
A collection of objects providing mirror session
information related to a given specific destination. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.12
|
|
|
A collection of objects providing support for Rstp.
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.13
|
|
|
GVRP configuration information that is not (yet)
in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.14
|
|
|
A group of objects that are used to configure the BPDU
Throttling feature. |
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.15
|
|
|
Notifications for Loop protection.
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.1
|
|
|
Notifications for Loop protect per VLAN
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.2
|
Compliance Statements (13)
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.1The compliance statement for HP Switches with IEEE
802.1Q VLAN support for bridging objects not found
in the standard Bridge MIBs.
802.1Q VLAN support for bridging objects not found
in the standard Bridge MIBs.
Required groups
| mandatory | hpicfBridgeVlanBaseGroup | |
| optional | hpicfBridgeGvrpPortGroup |
Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB. |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.2The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
Required groups
| mandatory | hpicfBridgeVlanBaseGroup | |
| optional | hpicfBridgeGvrpPortGroup |
Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB. |
| optional | hpicfBridgeRstpBaseGroup |
Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB. |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.3The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
Required groups
| mandatory | hpicfBridgeVlanBaseGroup | |
| optional | hpicfBridgeGvrpPortGroup |
Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB. |
| optional | hpicfBridgeRstpBaseGroup |
Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB. |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.4The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
Required groups
| mandatory | hpicfBridgeVlanBaseGroup | |
| optional | hpicfBridgeGvrpPortGroup |
Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB. |
| optional | hpicfBridgeRstpBaseGroup |
Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB. |
| optional | hpicfBridgeMirrorSessionBaseGroup |
Support for this group is mandatory for switches that implement the multi session mirroring (intelligent mirroring) feature. |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.5The compliance statement for HP Switches with
support for hpicfBridge loop protection objects.
support for hpicfBridge loop protection objects.
Required groups
| mandatory | hpicfBridgeLoopProtectBaseGroup | |
| mandatory | hpicfBridgeLoopProtectNotifications | |
| optional | hpicfBridgeLoopProtectBaseGroup |
Support for this group is mandatory for switches that implement the loop protection feature. |
| optional | hpicfBridgeLoopProtectNotifications |
Implementation of this group is mandatory for switches that implement the loop protection feature. |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.6The compliance statement for HP Switches that
support basic vlan configuration.
support basic vlan configuration.
Required groups
| mandatory | hpicfBridgeVoiceVlanConfigGroup |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.7The compliance statement for HP Switches that
support basic interface configuration.
support basic interface configuration.
Required groups
| mandatory | hpicfBridgeJumboInterfaceConfigGroup | |
| mandatory | hpicfBridgeManagementInterfaceConfigGroup |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.8The compliance statement for HP Switches that
support loop protect per VLAN feature.
support loop protect per VLAN feature.
Required groups
| mandatory | hpicfBridgeLoopProtectVLANGroup | |
| mandatory | hpicfBridgeVlanLoopProtectNotGrp | |
| mandatory | hpicfBridgeLoopProtectNotGrp |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.9The compliance statement for HP Switches that
support Rstp.
support Rstp.
Required groups
| mandatory | hpicfBridgeRstpPortEntryGroup |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.10The compliance statement for HP Switches that
support mirror sessions.
support mirror sessions.
Required groups
| mandatory | hpicfBridgeMirrorSessionEntryGroup |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.11The compliance statement for HP Switches that
support Rstp.
support Rstp.
Required groups
| mandatory | hpicfBridgeRstpPortEntryGroup1 |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.12The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs.
Required groups
| mandatory | hpicfBridgeVlanBaseGroup | |
| optional | hpicfBridgeGvrpPortGroup1 |
Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB. |
| optional | hpicfBridgeRstpBaseGroup |
Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB. |
| optional | hpicfBridgeMirrorSessionBaseGroup |
Support for this group is mandatory for switches that implement the multi session mirroring (intelligent mirroring) feature. |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.13The compliance statement for the MSTP BPDU
Throttling feature.
Throttling feature.
Required groups
| mandatory | hpicfBridgeStpBpduThrottleConfigGroup |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.1 |
A hpicfBridgeLoopProtectLoopDetectedNotification signifies
that a loop is detected by the Loop Protection Protocol. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications, this trap allows only one notifications every 30 seconds. Notifications that are missed due to this limitation are dropped and are not sent later. |
|
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.2 |
A hpicfBridgeLoopProtectLoopDetectedNotification signifies
that a loop is detected by the Loop Protection feature while operating in VLAN mode. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications, this trap allows only one notifications every 30 seconds. Notifications that are missed due to this limitation are dropped and are not sent later. |