HP-ICF-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
14

hpicfBfdSessTable

table
.1.3.6.1.2.1.222.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfBfdSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-BFD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-BFD-MIB::hpicfBfdSessTable' 
HP extensions to the BfdSessTable (RFC 7331).
hpicfBfdSessEntry row .1.3.6.1.2.1.222.1.6.1
HP extensions for an entry in the BfdSessTable.
Indexes
No indexes recorded
Column Syntax OID
hpicfBfdSessApplicationID
Name of application above BFD session.
Enumerationr/w
Enumerated Values:
0none
1ospf
2vrrp
3bgp
4multiple
5static
 .1.3.6.1.2.1.222.1.6.1.1
hpicfBfdSessStaus
Nature of application above BFD session.
Enumerationr/w
Enumerated Values:
1static
2dynamic
 .1.3.6.1.2.1.222.1.6.1.2
hpicfBfdSessClearStats
Flag to clear or not to clear statistics.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.222.1.6.1.3

hpicfBfdSessConfigTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.120.1.1 · 1 row entry · 11 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfBfdSessConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-BFD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-BFD-MIB::hpicfBfdSessConfigTable' 
A table of BFD session parameters
hpicfBfdSessConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1
A set of objects used to configure BFD session parameters .
Indexes
Column Syntax OID
hpicfBfdSessConfigIfIndex
The VLAN ifIndex value that uniquely
identifies a row in the hpicf bfd session Table
and corresponds to the VLAN on which the BFD
session exist.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.1
hpicfBfdSessConfigDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved in this case, and should not be
used.
BFD-TC-STD-MIBBfdIntervalTCr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2
hpicfBfdSessConfigReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…
BFD-TC-STD-MIBBfdIntervalTCr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.3
hpicfBfdSessConfigReqMinEchoRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multihop BFD session.
BFD-TC-STD-MIBBfdIntervalTCr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.4
hpicfBfdSessConfigDetectMult
This object specifies the Detect time multiplier.
BFD-TC-STD-MIBBfdMultiplierTCr/w
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.5
hpicfBfdSessConfigAuthPresFlag
This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.6
hpicfBfdSessConfigAuthenticationType
The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in…
IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationTypeTCr/w
Type Values:
-1noAuthentication
0reserved
1simplePassword
2keyedMD5
3meticulousKeyedMD5
4keyedSHA1
5meticulousKeyedSHA1
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.7
hpicfBfdSessConfigAuthenticationKeyID
The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
The value -1 indicates that no Authentication Key ID will
be present in the optional BFD Authentication …
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.8
hpicfBfdSessConfigAuthenticationKey
The authentication key. When the
hpicfBfdSessConfigAuthenticationType is simplePassword(1) and when the
encryption is enabled on the switch, the value of this object is the
encrypted password present in the BFD packets…
IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationKeyTCr/w
Type Constraints:
range: 0..252
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.9
hpicfBfdSessConfigAuthEncPwd
The authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.

When the bfdSessAuthenticationType is one of the keye…
IANA-BFD-TC-STD-MIBIANAbfdSessAuthenticationKeyTCr/w
Type Constraints:
range: 0..252
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.10
hpicfBfdSessConfigRowStatus
The status of this BFD session config entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.11