HP-ICF-ARP-PROTECT

        This MIB module contains HP proprietary
objects for managing Dynamic ARP
Protection.
    
Source file
HP-ICF-ARP-PROTECT
Last revised
Identity
hpicfArpProtect
Base OID
1.3.6.1.4.1.11.2.14.11.5.1.37
Imported Objects
HP-ICF-OID hpSwitch
IF-MIB ifIndex
INET-ADDRESS-MIB InetAddress InetAddressType
Q-BRIDGE-MIB VlanIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC MacAddress TruthValue
Net-SNMP examples using the hp MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-ICF-ARP-PROTECT' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-ICF-ARP-PROTECT::hpicfArpProtect'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-ARP-PROTECT' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-ARP-PROTECT::hpicfArpProtect'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (32)
.1.3.6.1.4.1.11.2.14.11.5.1.37
.1.3.6.1.4.1.11.2.14.11.5.1.37.0
.1.3.6.1.4.1.11.2.14.11.5.1.37.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.1
OctetString
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.2
Bits
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.3
Enumeration
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.4
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.2.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.3
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.4
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.5
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.6
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.7
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.3
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.4
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.5
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.6
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.7
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.8
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.9
.1.3.6.1.4.1.11.2.14.11.5.1.37.2
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.2
Dependencies (19) 7 direct · 12 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (1)

OID .1.3.6.1.4.1.11.2.14.11.5.1.37.2.2.1
The compliance statement for HP switches
that support Dynamic ARP Protection.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.11.2.14.11.5.1.37.0.1
An hpicfArpProtectErrantReply notification signifies that
the ARP protection entity is enabled and has detected
an errant ARP reply packet. The source and
destination addresses from the packet header are included
in the notification.