HMTRACKING-SNMP-MIB Table View

This table contains variables to define
an entry in the Hirschmann Tracking database.

hmTrackingEntry row .1.3.6.1.4.1.248.14.15.1.1.1

The entry of the hmTrackingTable.

Indexes

hmTrackId

Column	Syntax	OID
hmTrackId The id of an object being tracked.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.15.1.1.1.1
hmTrackRowStatus Defines the status of the Tracking database entry. Set to createAndWait(5) to create a new row. Set to destroy(6) to delete an entry. Set to notInService(2) to change an entry. Reads as active(1) if the tracked object e…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.14.15.1.1.1.2
hmTrackType The kind of an object being tracked.	Enumerationr/w Enumerated Values: 1 undefined 2 interface 3 ping 4 logical	.1.3.6.1.4.1.248.14.15.1.1.1.3
hmTrackState Shows if the tracked object is currently UP or DOWN.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.248.14.15.1.1.1.4
hmTrackNumberOfChanges The number of state changes after an object being tracked, entered its operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.15.1.1.1.5
hmTrackTimeSinceLastChange The time difference to the last state change of an object being tracked (in hundredths of a second). If the current state was entered prior to the last re-initialization of the local network management subsystem, then t…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.14.15.1.1.1.6
hmTrackIfNumber The number of the interface being tracked. The number of the interface to send ping packets. For ping objects the value 65535 is used to show that no valid interface number has been set. It cannot be written.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.14.15.1.1.1.7
hmTrackIfLinkUpDelay If a link-up recovers within this delay, the tracked object is not considered as up.	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.14.15.1.1.1.8
hmTrackIfLinkDownDelay If a link-down recovers within this delay, the tracked object is not considered as down.	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.14.15.1.1.1.9
hmTrackPingIpAddress The IP address of the router being monitored.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.14.15.1.1.1.10
hmTrackPingInterval The number of seconds between the pings to the target IP address.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.4.1.248.14.15.1.1.1.11
hmTrackPingMiss This specifies the number of consecutive ping misses until the tracked object is considered to be down.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.248.14.15.1.1.1.12
hmTrackPingSuccess This specifies the number of consecutive ping successes until the tracked object is considered to be up.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.248.14.15.1.1.1.13
hmTrackPingTimeout This specifies the timeout in milliseconds for a ping reply. After the timeout the ping reply is considered as lost.	millisecondsInteger32r/w Constraints: range: 10-10000	.1.3.6.1.4.1.248.14.15.1.1.1.14
hmTrackPingTTL This specifies the time to live for a ping request packet.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.248.14.15.1.1.1.15
hmTrackPingBestRouteIfNumber This shows the number of the interface which belongs to the best route. The interface number is zero if the best route is not used to send ping packets.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.14.15.1.1.1.16
hmTrackLogicalOperator Defines the logical operation performed on the instances	Enumerationr/w Enumerated Values: 1 and 2 or	.1.3.6.1.4.1.248.14.15.1.1.1.17
hmTrackSendStateChangeTrap Enables or disables the sending of a trap when hmTrackState changes	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.14.15.1.1.1.18

This table contains information about registered
applications, for each object being tracked.

hmTrackingApplicationEntry row .1.3.6.1.4.1.248.14.15.1.2.1

The entry of the hmTrackingApplicationTable.

Indexes

hmTrackId hmTrackAppId

Column	Syntax	OID
hmTrackAppId The id of an application which tracks an object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.15.1.2.1.2
hmTrackAppName The name of the registered application.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.248.14.15.1.2.1.3

This table contains information the tracking
instances that are combined into a logical
tracking instance.

hmTrackLogicalInstanceEntry row .1.3.6.1.4.1.248.14.15.1.3.1

The entry of the hmTrackLogicalInstanceTable.

Indexes

hmTrackId hmTrackLogicalInstanceId

Column	Syntax	OID
hmTrackLogicalInstanceId The id of an object that is a member of the logical tracking object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.15.1.3.1.2
hmTrackLogicInstRowStatus Defines the status of the Logic Tracking member entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the row exists.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.14.15.1.3.1.3