HMLLDP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
12
hmLLDPInterfaceTable
table
.1.3.6.1.4.1.248.14.7.1.2
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hmLLDPInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HMLLDP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HMLLDP-MIB::hmLLDPInterfaceTable'
This table contains variables for each interface of the switch.
The entry of the hmLLDPInterfaceTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
index to identify an interface card. This value is never
greater than hmSysGroupCapacity. |
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.248.14.7.1.2.1.1 |
||||||||
|
index to identify an interface within an interface card.
|
Integer32 Constraints: range: 1-128 |
.1.3.6.1.4.1.248.14.7.1.2.1.2 |
||||||||
|
Configure Hirschmann LLDP on this physical port.
If an IEEE802.1AB capable device not manufactured by Hirschmann is connected to a port, hmLLDPIfaceHirmaMode should be set to disabled (4) for this port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.14.7.1.2.1.3 |
||||||||
|
If configured to lldpOnly(1), only received LLDP messages
will be used to populate the LLDP-MIB's remTable. If configured to macOnly(2), learned mac addresses out of the switch's forwarding database (FDB) will be us… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.14.7.1.2.1.4 |
||||||||
|
Configure Hirschmann LLDP on this physical port.
This value limits the number of entries in the remTable for this port. |
Integer32r/w Constraints: range: 1-50 |
.1.3.6.1.4.1.248.14.7.1.2.1.5 |
hmLLDPStatsIfTable
table.1.3.6.1.4.1.248.14.7.2.1
·
1 row entry
·
7 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hmLLDPStatsIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HMLLDP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HMLLDP-MIB::hmLLDPStatsIfTable'
This table contains variables for each interface of the switch.
The entry of the hmLLDPStatsIfTable.
| Column | Syntax | OID |
|---|---|---|
|
index to identify an interface card. This value is never
greater than hmSysGroupCapacity. |
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.248.14.7.2.1.1.1 |
|
index to identify an interface within an interface card.
|
Integer32 Constraints: range: 1-32 |
.1.3.6.1.4.1.248.14.7.2.1.1.2 |
|
The total number of learned entries in the forwarding database (FDB) for this port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.14.7.2.1.1.3 |
|
The total number of remote connections in the LLDP MIB's remTable for this port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.14.7.2.1.1.4 |
|
The number of remote connections in the LLDP MIB's remTable for this port
that were detected because an LLDP message from an IEEE source was received. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.14.7.2.1.1.5 |
|
The number of remote connections in the LLDP MIB's remTable for this port
that were detected because an LLDP message from an Hirschmann source was received. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.14.7.2.1.1.6 |
|
The number of remote connections in the LLDP MIB's remTable for this port
that were detected in the forwarding database (FDB) for this port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.14.7.2.1.1.7 |