HMIOMODULE-SNMP-MIB

        The Hirschmann Private IO Module definitions for Platform devices.
    
Source file
HMIOMODULE-SNMP-MIB
Last revised
Identity
hmIOModuleGroup
Base OID
1.3.6.1.4.1.248.14.1.13
Imported Objects
HMPRIV-MGMT-SNMP-MIB hmChassis hmChassisEvent
INET-ADDRESS-MIB InetPortNumber
SNMPv2-SMI Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the hirschmann MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HMIOMODULE-SNMP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HMIOMODULE-SNMP-MIB::hmIOModuleGroup'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HMIOMODULE-SNMP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HMIOMODULE-SNMP-MIB::hmIOModuleGroup'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (35)
.1.3.6.1.4.1.248.14.1.13
.1.3.6.1.4.1.248.14.1.13.1
.1.3.6.1.4.1.248.14.1.13.1.1
.1.3.6.1.4.1.248.14.1.13.1.1.1
.1.3.6.1.4.1.248.14.1.13.1.1.2
Integer32
.1.3.6.1.4.1.248.14.1.13.1.1.3
Integer32
.1.3.6.1.4.1.248.14.1.13.1.1.4
Integer32
.1.3.6.1.4.1.248.14.1.13.1.1.5
.1.3.6.1.4.1.248.14.1.13.1.2
.1.3.6.1.4.1.248.14.1.13.1.2.1
Integer32
.1.3.6.1.4.1.248.14.1.13.1.2.1.1
Integer32
.1.3.6.1.4.1.248.14.1.13.1.2.1.2
.1.3.6.1.4.1.248.14.1.13.1.2.1.3
.1.3.6.1.4.1.248.14.1.13.1.2.1.4
.1.3.6.1.4.1.248.14.1.13.1.3
.1.3.6.1.4.1.248.14.1.13.1.3.1
Integer32
.1.3.6.1.4.1.248.14.1.13.1.3.1.1
Integer32
.1.3.6.1.4.1.248.14.1.13.1.3.1.2
.1.3.6.1.4.1.248.14.1.13.1.3.1.3
.1.3.6.1.4.1.248.14.1.13.1.3.1.4
.1.3.6.1.4.1.248.14.1.13.1.3.1.5
Integer32
.1.3.6.1.4.1.248.14.1.13.1.3.1.6
Integer32
.1.3.6.1.4.1.248.14.1.13.1.3.1.7
.1.3.6.1.4.1.248.14.1.13.1.3.1.8
.1.3.6.1.4.1.248.14.1.13.2
.1.3.6.1.4.1.248.14.1.13.2.1
.1.3.6.1.4.1.248.14.1.13.2.1.1
Integer32
.1.3.6.1.4.1.248.14.1.13.2.1.1.1
Integer32
.1.3.6.1.4.1.248.14.1.13.2.1.1.2
Enumeration
.1.3.6.1.4.1.248.14.1.13.2.1.1.3
.1.3.6.1.4.1.248.14.1.13.2.2
.1.3.6.1.4.1.248.14.1.13.2.2.1
Integer32
.1.3.6.1.4.1.248.14.1.13.2.2.1.1
Integer32
.1.3.6.1.4.1.248.14.1.13.2.2.1.2
Enumeration
.1.3.6.1.4.1.248.14.1.13.2.2.1.3
Dependencies (18) 4 direct · 14 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Enumeration
enable(1)
disable(2)
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.248.14.1.0.16
This trap is sent if the state of an input changes.
This trap is sent only when hmIOModConfigDigInputSnmpTrap is set
to enabled (1).
.1.3.6.1.4.1.248.14.1.0.17
This trap is sent if the state of an input changes.
This trap is sent when hmIOModConfigDigOutputSnmpTrap is set
to enabled (1) or when the output value changes from or to invalid (3)