HM2-TRACKING-MIB Table View

Tracking configuration table.
This table provides the interface to setup a 
specific tracking instance in the tracking database.

hm2TrackingConfigEntry row .1.3.6.1.4.1.248.11.115.1.1.1.1

The entry of the hm2TrackingConfigTable.

Indexes

hm2TrackType hm2TrackId

Column	Syntax	OID
hm2TrackType The kind of an object being tracked.	Enumeration Enumerated Values: 1 interface 2 ping 3 logical	.1.3.6.1.4.1.248.11.115.1.1.1.1.1
hm2TrackId The id of an object being tracked.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.248.11.115.1.1.1.1.2
hm2TrackName The name of an object being tracked.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.1.1.1.3
hm2TrackDescription The name of an object being tracked.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.1.1.1.4
hm2TrackOperState Shows if the tracked object is currently up(1), down(2) or notReady(3). in case the state indicates notReady, the corresponding configuration is missing or invalid.	Enumeration Enumerated Values: 1 up 2 down 3 notReady	.1.3.6.1.4.1.248.11.115.1.1.1.1.5
hm2TrackNumberOfChanges The number of state changes after an object being tracked, entered its operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.115.1.1.1.1.6
hm2TrackTimeLastChange The time of the last state change of an object being tracked, measured in seconds since 00:00:00, January 1, 1970. If the current state was entered prior to the last re-initialization of the local network management sub…	HM2-TC-MIBHmTimeSeconds1970	.1.3.6.1.4.1.248.11.115.1.1.1.1.7
hm2TrackSendStateChangeTrap Enables or disables the sending of a trap when hm2TrackStatus changes	HM2-TC-MIBHmEnabledStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.248.11.115.1.1.1.1.8
hm2TrackStatus Defines the status of the tracking database entry. Set to createAndWait(5) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the tracked object exists and is trackable, notReady(3) otherwi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.11.115.1.1.1.1.9

Interface tracking configuration table.
This table provides the interface to setup the parameters
for an interface tracking object.

hm2TrackingInterfaceEntry row .1.3.6.1.4.1.248.11.115.1.2.1.1

The entry of the hm2TrackingInterfaceTable.

Indexes

hm2TrackInterfaceId

Column	Syntax	OID
hm2TrackInterfaceId The identifier of the interface object being tracked.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.115.1.2.1.1.1
hm2TrackIfNumber The number of the interface being tracked.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.11.115.1.2.1.1.2
hm2TrackIfLinkUpDelay If a link-up recovers within this delay, the tracked object is not considered as up.	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.11.115.1.2.1.1.3
hm2TrackIfLinkDownDelay If a link-down recovers within this delay, the tracked object is not considered as down.	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.11.115.1.2.1.1.4

Ping tracking configuration table.
This table provides the interface to setup the parameters
for a ping tracking object.

hm2TrackingPingEntry row .1.3.6.1.4.1.248.11.115.1.3.1.1

The entry of the hm2TrackingPingTable.

Indexes

hm2TrackPingId

Column	Syntax	OID
hm2TrackPingId The identifier of the ping object being tracked.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.115.1.3.1.1.1
hm2TrackPingIfNumber The number of the source interface, the ping packets are sent. A value of Zero (0) indicates that no interface is configured.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.11.115.1.3.1.1.2
hm2TrackPingInetAddrType The address type of the router being monitored.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.248.11.115.1.3.1.1.3
hm2TrackPingInetAddr The address of the router being monitored.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.3.1.1.4
hm2TrackPingInterval The number of milliseconds between the pings to the target router address.	millisecondsInteger32r/w Constraints: range: 100-20000	.1.3.6.1.4.1.248.11.115.1.3.1.1.5
hm2TrackPingMiss This specifies the number of consecutive ping misses until the tracked object is considered to be down.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.248.11.115.1.3.1.1.6
hm2TrackPingSuccess This specifies the number of consecutive ping successes until the tracked object is considered to be up.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.248.11.115.1.3.1.1.7
hm2TrackPingTimeout This specifies the timeout in milliseconds for a ping reply. After the timeout the ping reply is considered as lost.	millisecondsInteger32r/w Constraints: range: 10-10000	.1.3.6.1.4.1.248.11.115.1.3.1.1.8
hm2TrackPingTTL This specifies the time to live for a ping request packet.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.248.11.115.1.3.1.1.9
hm2TrackPingBestRouteIfNumber This shows the number of the interface which belongs to the best route. The interface number is zero if the best route is not used to send ping packets.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.11.115.1.3.1.1.10

This table contains the configuration of the tracking
instances that are combined into logical
tracking instances.

hm2TrackLogicalInstanceEntry row .1.3.6.1.4.1.248.11.115.1.4.1.1

The entry of the hm2TrackLogicalInstanceTable.

Indexes

hm2TrackLogicalId

Column	Syntax	OID
hm2TrackLogicalId The identifier of the logical object being tracked.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.115.1.4.1.1.1
hm2TrackLogicalOperandNameA The name of the tracking object to be used as operand A in the logical operation: A operator B.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.4.1.1.2
hm2TrackLogicalOperandNameB The name of the tracking object to be used as operand B in the logical operation: A operator B.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.4.1.1.3
hm2TrackLogicalOperator Defines the logical operation performed on the configured operands A and B.	Enumerationr/w Enumerated Values: 1 and 2 or	.1.3.6.1.4.1.248.11.115.1.4.1.1.4

This table contains information about registered
applications, for each object being tracked.

hm2TrackingApplicationEntry row .1.3.6.1.4.1.248.11.115.1.5.1.1

The entry of the hm2TrackingApplicationTable.

Indexes

hm2TrackAppId hm2TrackType hm2TrackId

Column	Syntax	OID
hm2TrackAppId The id of an application which tracks an object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.115.1.5.1.1.1
hm2TrackAppName The name of the registered application.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.5.1.1.4
hm2TrackAppObjectName The name of the tracking object the application registered for.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.5.1.1.5

.

hm2TrackStaticRouteEntry row .1.3.6.1.4.1.248.11.115.1.6.1.1

.

Indexes

No indexes recorded

Column	Syntax	OID
hm2TrackStaticRouteTrackId Associate and dissociate the tracking instance to a static route. To dissociate, pass an empty string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.6.1.1.1
hm2TrackStaticRouteTrackState Shows if the tracked object is currently up(1), down(2) or notReady(3). in case the state indicates notReady, the corresponding configuration is missing or invalid.	Enumeration Enumerated Values: 1 up 2 down 3 notReady	.1.3.6.1.4.1.248.11.115.1.6.1.1.2

This table contains information about
tracking objects associated to each interface.

hm2TrackInterfaceStatusEntry row .1.3.6.1.4.1.248.11.115.1.8.1.1

The entry of the hm2TrackInterfaceStatusTable.

Indexes

No indexes recorded

Column	Syntax	OID
hm2TrackInterfaceStatusTrackId Associate and dissociate the tracking object to an interface. To dissociate, pass an empty string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.248.11.115.1.8.1.1.1
hm2TrackInterfaceStatusTrackState Shows if associated tracking object is currently up(1) or down(2). In case the state indicates notReady(3), the corresponding configuration is missing or invalid.	Enumeration Enumerated Values: 1 up 2 down 3 notReady	.1.3.6.1.4.1.248.11.115.1.8.1.1.2