HM2-PLATFORM-PORTSECURITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
24
.1.3.6.1.4.1.248.12.20.1.2 · 1 row entry · 18 columns
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2AgentPortSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-PORTSECURITY-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-PORTSECURITY-MIB::hm2AgentPortSecurityTable'
A table for Port Security and associated functionality.
hm2AgentPortSecurityEntry row .1.3.6.1.4.1.248.12.20.1.2.1
Represents entry for port security table
Indexes
Column Syntax OID
Mode showing whether at port level security is enabled or not.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.248.12.20.1.2.1.1
This variable signifies the limit of dynamically locked MAC addresses
allowed on a specific port.
Unsigned32r/w
Constraints:
range: 0-600
.1.3.6.1.4.1.248.12.20.1.2.1.2
This variable signifies the limit of statically locked MAC addresses
allowed on a specific port.
Unsigned32r/w
Constraints:
range: 0-64
.1.3.6.1.4.1.248.12.20.1.2.1.3
This variable is used to enable or disable the sending of new violation
traps designating when a packet with a disallowed MAC address is
received on a locked port.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.248.12.20.1.2.1.4
This variable displays the statically locked MAC addresses for port.
The list displayed in a particular fashion :
2 a0:b1:c2:d1:e3:a1,11 a0:b1:c2:d3:e4:f5
(i.e., VLAN MAC pairs separated by commas).
OctetString
Constraints:
range: 0-1536
.1.3.6.1.4.1.248.12.20.1.2.1.6
This variable displays the vlan-id and source MAC address of the last packet that was
discarded on a locked port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.248.12.20.1.2.1.7
This MIB variable accepts a VLAN id and MAC address to be added to the list
of statically locked MAC addresses on a port. The VLAN id and MAC address combination
would be entered in a particular fashion like :- 2 a0:b0:…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.248.12.20.1.2.1.8
This MIB variable accepts a VLAN id and MAC address to be removed from the list
of statically locked MAC addresses on a port.. The VLAN id and MAC address combination
would be entered in a particular fashion like :- 2 a…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.248.12.20.1.2.1.9
When this object is enabled, all the dynamically locked MAC addresses will
be moved to statically locked addresses on a port. GET operation on this object will display
disable.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.248.12.20.1.2.1.10
The current number of dynamically locked MAC addresses on this port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.2.1.20
The current number of statically locked MAC addresses on this port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.2.1.21
The number of active violations for which a violation trap was sent on this port.
This counter is only valid when hm2AgentPortSecurityViolationTrapMode is enabled
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.2.1.22
The minimum seconds between two successive violation traps on this port.
Unsigned32r/w
Constraints:
range: 0-3600
.1.3.6.1.4.1.248.12.20.1.2.1.23
This object indicates whether a port is auto-disabled when the configured threshold is reached.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.248.12.20.1.2.1.248
The current number of statically locked IP addresses on this port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.2.1.249
This variable displays the statically locked IP addresses for port.
The list displayed in a particular fashion :
2 100.1.1.200, 11 110.2.2.100.
OctetString
Constraints:
range: 0-1536
.1.3.6.1.4.1.248.12.20.1.2.1.250
This MIB variable accepts a VLAN id and IP address to be added to the list
of statically locked IP addresses on a port. The VLAN id and IP address combination
would be entered in a particular fashion like :- 2 192.168.2…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.248.12.20.1.2.1.251
This MIB variable accepts a VLAN id and IP address to be removed from the list
of statically locked IP addresses on a port.. The VLAN id and IP address combination
would be entered in a particular fashion like :- 2 192.…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.248.12.20.1.2.1.252
.1.3.6.1.4.1.248.12.20.1.3 · 1 row entry · 2 columns
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2AgentPortSecurityDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-PORTSECURITY-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-PORTSECURITY-MIB::hm2AgentPortSecurityDynamicTable'
A table for Port Security Dynamic and associated functionality.
hm2AgentPortSecurityDynamicEntry row .1.3.6.1.4.1.248.12.20.1.3.1
Represents entry for port MAC Locking table
Column Syntax OID
Source VLAN id of the packet that is received on the dynamically locked port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.3.1.1
Source MAC address of the packet that is received on the dynamically locked port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.248.12.20.1.3.1.2
.1.3.6.1.4.1.248.12.20.1.10 · 1 row entry · 2 columns
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2AgentPortSecurityStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-PORTSECURITY-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-PORTSECURITY-MIB::hm2AgentPortSecurityStaticTable'
A table for Port Security Static and associated functionality.
hm2AgentPortSecurityStaticEntry row .1.3.6.1.4.1.248.12.20.1.10.1
Represents entry for port MAC Locking table
Column Syntax OID
VLAN id of the statically locked address .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.10.1.1
Statically locked MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.248.12.20.1.10.1.2
.1.3.6.1.4.1.248.12.20.1.11 · 1 row entry · 2 columns
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2AgentPortSecurityIpStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-PORTSECURITY-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-PORTSECURITY-MIB::hm2AgentPortSecurityIpStaticTable'
A table for Port Security Static and associated functionality.
hm2AgentPortSecurityIpStaticEntry row .1.3.6.1.4.1.248.12.20.1.11.1
Represents entry for port MAC Locking IP table
Column Syntax OID
VLAN id of the statically locked address .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.248.12.20.1.11.1.1
Statically locked IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.248.12.20.1.11.1.2