HM2-NETCONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
13
.1.3.6.1.4.1.248.11.20.1.1.36 · 1 row entry · 8 columns
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2NetIPv6LocalAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-NETCONFIG-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-NETCONFIG-MIB::hm2NetIPv6LocalAddrTable'
The list of IPv6 addresses and their prefixes
for the network port.
hm2NetIPv6LocalAddrEntry row .1.3.6.1.4.1.248.11.20.1.1.36.1
An interface entry containing objects of
a particular IPv6 address prefix
Column Syntax OID
The management IPv6 prefix type
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.248.11.20.1.1.36.1.1
IPv6 prefix of the management agent board.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.248.11.20.1.1.36.1.2
The management IPv6 address prefix length.
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.248.11.20.1.1.36.1.3
The management IPv6 address type
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.248.11.20.1.1.36.1.4
IPv6 address of the management agent board.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.248.11.20.1.1.36.1.5
The management IPv6 EUI flag.
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.248.11.20.1.1.36.1.6
Origin of IPv6 address.
IP-MIBIpAddressOriginTCr/w
Type Values:
1other
2manual
4dhcp
5linklayer
6random
.1.3.6.1.4.1.248.11.20.1.1.36.1.7
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.248.11.20.1.1.36.1.8
.1.3.6.1.4.1.248.11.20.1.2.20 · 1 row entry · 5 columns
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2NetACDAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-NETCONFIG-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-NETCONFIG-MIB::hm2NetACDAddrTable'
This table contains address conflict detection information
on the local system known to this agent.
hm2NetACDAddrEntry row .1.3.6.1.4.1.248.11.20.1.2.20.1
IP Address conflict detection information about a particular
address on the local system known to this agent.
There may be multiple addresses configured on the system.
Entries may be created and deleted in this table b…
Column Syntax OID
A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.
RMON2-MIBTimeFilter .1.3.6.1.4.1.248.11.20.1.2.20.1.1
Local IP Address Type
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.248.11.20.1.2.20.1.3
IP address used to identify the management address
component associated with the local system.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.248.11.20.1.2.20.1.5
The physical address of the device that was detected
causing the ip address conflict.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.248.11.20.1.2.20.1.7
The interface index on the local system
where the ip address conflict was detected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.248.11.20.1.2.20.1.9