HM2-DEVMGMT-MIB Table View

hm2DevMgmtSwVersCertSerialNo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.1

Certificate serial number.

OctetString

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.2

hm2DevMgmtSwVersCertSubject

Certificate subject name.

hm2DevMgmtSwVersCertSigAlg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.3

Certificate signature algorithm.

hm2DevMgmtSwVersCertStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.4

hm2DevMgmtSwVersCertType

Certificate type used for image verification.

Enumeration

Enumerated Values:

1	production
2	development

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.5

Contains the revocation status of the Certificate.

Enumeration

Enumerated Values:

1	revoked
2	valid

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.6

hm2DevMgmtSwVersCertFingerprint

SHA-256 certificate fingerprint.

OctetString

.1.3.6.1.4.1.248.11.10.1.3.1.7.1.7

hm2DevMgmtSwVersTable

table

.1.3.6.1.4.1.248.11.10.1.3.1.10 · 1 row entry · 8 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DevMgmtSwVersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2DevMgmtSwVersTable'

This table contains all information related to running 
and stored software versions on the device.
The limit are 24 firmware (*.bin) files in up to 5 directory levels.

hm2DevMgmtSwVersEntry row .1.3.6.1.4.1.248.11.10.1.3.1.10.1

The entry of the hm2DevMgmtSwVersTable.

Indexes

hm2DevMgmtSwFileLocation hm2DevMgmtSwFileType hm2DevMgmtSwFileIdx

Column Syntax OID

hm2DevMgmtSwFileLocation

Indicates the file location (ram, flash, sd-card or usb).

Enumeration

Enumerated Values:

1	ram
2	flash
3	sd-card
4	usb

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.1

hm2DevMgmtSwFileType

Indicates the file type (firmware, applet, logic).

Enumeration

Enumerated Values:

1	firmware
2	applet
3	logic

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.2

hm2DevMgmtSwFileIdx

Indicates the index.
For flash the index has the following meaning:
- flash.xxx.1 = bootable version in flash (ROM)
- flash.xxx.2 = backup version in flash (BAK)

Integer32

Constraints:
range: 1-25

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.3

hm2DevMgmtSwFileName

Indicates the file name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.4

hm2DevMgmtSwVersion

Version of the stored software.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.5

hm2DevMgmtSwMajorRelNum

Shows the major release number of the firmware.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.6

hm2DevMgmtSwMinorRelNum

Shows the minor release number of the firmware.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.7

hm2DevMgmtSwBugfixRelNum

Shows the bug fix release number of the firmware.

hm2UnitIndex hm2DevMgmtTemperatureExtType hm2DevMgmtTemperatureExtSensorId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.3.1.10.1.8

hm2DevMgmtLogicVersTable

table

.1.3.6.1.4.1.248.11.10.1.4.5.1 · 1 row entry · 3 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DevMgmtLogicVersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2DevMgmtLogicVersTable'

The table displays all versions of
supported logic modules.

hm2DevMgmtLogicVersEntry row .1.3.6.1.4.1.248.11.10.1.4.5.1.1

The entry of the
hm2DevMgmtLogicVersTable.

Indexes

hm2DevMgmtLogicIdx

Column	Syntax	OID
hm2DevMgmtLogicIdx Index of the module to display.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.248.11.10.1.4.5.1.1.1`
hm2DevMgmtLogicAddress Address of the logic module in fpga.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.248.11.10.1.4.5.1.1.2`
hm2DevMgmtLogicVersion Version of the logic module in fpga.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.248.11.10.1.4.5.1.1.3`

hm2DevMgmtTemperatureExtTable

table

.1.3.6.1.4.1.248.11.10.1.5.10 · 1 row entry · 5 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DevMgmtTemperatureExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2DevMgmtTemperatureExtTable'

This table is used to identify the temperature settings within a device.

hm2DevMgmtTemperatureExtEntry row .1.3.6.1.4.1.248.11.10.1.5.10.1

The entries of the temperature table per unit.

Indexes

Column Syntax OID

hm2DevMgmtTemperatureExtType

This object is used to identify the type of the temperature sensor.

Enumeration

Enumerated Values:

1	mainboard
2	module
3	switch
4	cpu
5	phy
10	other

.1.3.6.1.4.1.248.11.10.1.5.10.1.1

hm2DevMgmtTemperatureExtSensorId

This object is used to identify the sensor Id.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.248.11.10.1.5.10.1.2

hm2DevMgmtTemperatureExt

This object is used to identify the temperature within a device in units of centigrade (Celsius).

hm2DevMgmtTemperatureExtUpperLimit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.5.10.1.3

This object is used to define a maximum level for the
temperature within a device. If the temperature rises above
this upper limit, the management station will be notified by
a hm2DevMgmtTemperature trap.

Integer32r/w

Constraints:
range: -99-99

.1.3.6.1.4.1.248.11.10.1.5.10.1.4

hm2DevMgmtTemperatureExtLowerLimit

This object is used to define a minimum level for the
temperature within a device. If the temperature falls
below this lower limit, the management station will be notified
by a hm2DevMgmtTemperature trap.

Integer32r/w

Constraints:
range: -99-99

.1.3.6.1.4.1.248.11.10.1.5.10.1.5

hm2IfaceTable

table

.1.3.6.1.4.1.248.11.10.1.6.1 · 1 row entry · 6 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2IfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2IfaceTable'

This table contains extended PHY capabilities and
configuration options.

hm2IfaceEntry row .1.3.6.1.4.1.248.11.10.1.6.1.1

Entry with the configuration options and supported
features of a port.

Indexes

hm2IfacePhysIndex

Column Syntax OID

hm2IfacePhysIndex

The index of the available physical interfaces.

hm2IfacePortCapabilityBits

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.6.1.1.1

manual-mdix - port supports MDIX and MDI
auto-mdix - port supports MDIX and Auto-MDIX
auto-power-down - port can enter low power mode if no link is established
energy-efficient-ethernet - port supports EEE
cable-test…

Bits

Enumerated Values:

0	manual-mdix
1	auto-mdix
2	auto-power-down
3	energy-efficient-ethernet
4	cable-test
5	poe
6	poe-plus
7	poe-ext

.1.3.6.1.4.1.248.11.10.1.6.1.1.2

hm2IfaceCableCrossing

This variable configures the cable crossing on twisted pair cables.
When set to 'mdi', the device does not swap the send and receive line pairs of the TP cable for this port.
When set to 'mdix', the device swaps the sen…

Enumerationr/w

Enumerated Values:

1	mdi
2	mdix
3	auto-mdix
4	unsupported

.1.3.6.1.4.1.248.11.10.1.6.1.1.3

hm2IfacePowerState

This variable configures the power on the interface.
When set to 'enable' that means the interface-power is on (power up)
When set to 'disable' that means the interface-power is off (power down)
The interface power stat…

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.10.1.6.1.1.4

hm2IfaceAutoPowerDown

This variable configures the automatic power save mode on the interface.
When set to 'auto-power-down', the port goes in a low power mode if no link is detected.
When set to 'no-power-save', the port does not use the au…

Enumerationr/w

Enumerated Values:

1	auto-power-down
2	no-power-save
3	energy-efficient-ethernet
4	unsupported

.1.3.6.1.4.1.248.11.10.1.6.1.1.5

hm2IfaceOperAdminStatus

This variable shows the operational admin state of a specific interface.
The operational state could be different to the ifAdminStatus if the interface is
forced to down by other means like hm2AutoDisableIntfOperState.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.248.11.10.1.6.1.1.6

hm2IfaceLayoutTable

table

.1.3.6.1.4.1.248.11.10.1.6.2 · 1 row entry · 7 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2IfaceLayoutTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2IfaceLayoutTable'

This table does contain the layout of the interface modules or 
blocks. It contains all possible physical and logical items. 
This table can be used to determine any interface index according to 
'IfEntry' that may exist and the name of this interface.

hm2IfaceLayoutEntry row .1.3.6.1.4.1.248.11.10.1.6.2.1

An entry of a module or block of interfaces.

Indexes

hm2IfaceLayoutIndex

Column Syntax OID

hm2IfaceLayoutIndex

The index used for this table.

hm2IfaceLayoutStartIfIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.6.2.1.1

It specifies the first interface index of this block or module.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.248.11.10.1.6.2.1.2

hm2IfaceLayoutEndIfIndex

It specifies the last interface index of this block or module that
can exist for this particular device. The amount of interfaces
between first and last may not be equal than to the maximum
interface per module.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.248.11.10.1.6.2.1.3

hm2IfaceLayoutModuleCapacity

It is the Number of modules in that block. Currently not used and it is always 0.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.10.1.6.2.1.4

hm2IfaceLayoutModulePortCapacity

Number of interfaces that one module can contain. Currently not used and it is always 0

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.10.1.6.2.1.5

hm2IfaceLayoutFormat

This specifies a format string that can be used to determine the textual representation of an interface in this block.
following wildcards are supported:
%i the absolute interface number according to 'IfEntry'.
%p the …

hm2IfaceLayoutIfIndexType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.6.2.1.6

Type of the interfaces in that block according to IANA-Type table.

IANAifType-MIBIANAifType

Type Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
55	ieee80212
56	fibreChannel
57	hippiInterface
58	frameRelayInterconnect
59	aflane8023
60	aflane8025
61	cctEmul
62	fastEther
63	isdn
64	v11
65	v36
66	g703at64k
67	g703at2mb
68	qllc
69	fastEtherFX
70	channel
71	ieee80211
72	ibm370parChan
73	escon
74	dlsw
75	isdns
76	isdnu
77	lapd
78	ipSwitch
79	rsrb
80	atmLogical
81	ds0
82	ds0Bundle
83	bsc
84	async
85	cnr
86	iso88025Dtr
87	eplrs
88	arap
89	propCnls
90	hostPad
91	termPad
92	frameRelayMPI
93	x213
94	adsl
95	radsl
96	sdsl
97	vdsl
98	iso88025CRFPInt
99	myrinet
100	voiceEM
101	voiceFXO
102	voiceFXS
103	voiceEncap
104	voiceOverIp
105	atmDxi
106	atmFuni
107	atmIma
108	pppMultilinkBundle
109	ipOverCdlc
110	ipOverClaw
111	stackToStack
112	virtualIpAddress
113	mpc
114	ipOverAtm
115	iso88025Fiber
116	tdlc
117	gigabitEthernet
118	hdlc
119	lapf
120	v37
121	x25mlp
122	x25huntGroup
123	transpHdlc
124	interleave
125	fast
126	ip
127	docsCableMaclayer
128	docsCableDownstream
129	docsCableUpstream
130	a12MppSwitch
131	tunnel
132	coffee
133	ces
134	atmSubInterface
135	l2vlan
136	l3ipvlan
137	l3ipxvlan
138	digitalPowerline
139	mediaMailOverIp
140	dtm
141	dcn
142	ipForward
143	msdsl
144	ieee1394
145	if-gsn
146	dvbRccMacLayer
147	dvbRccDownstream
148	dvbRccUpstream
149	atmVirtual
150	mplsTunnel
151	srp
152	voiceOverAtm
153	voiceOverFrameRelay
154	idsl
155	compositeLink
156	ss7SigLink
157	propWirelessP2P
158	frForward
159	rfc1483
160	usb
161	ieee8023adLag
162	bgppolicyaccounting
163	frf16MfrBundle
164	h323Gatekeeper
165	h323Proxy
166	mpls
167	mfSigLink
168	hdsl2
169	shdsl
170	ds1FDL
171	pos
172	dvbAsiIn
173	dvbAsiOut
174	plc
175	nfas
176	tr008
177	gr303RDT
178	gr303IDT
179	isup
180	propDocsWirelessMaclayer
181	propDocsWirelessDownstream
182	propDocsWirelessUpstream
183	hiperlan2
184	propBWAp2Mp
185	sonetOverheadChannel
186	digitalWrapperOverheadChannel
187	aal2
188	radioMAC
189	atmRadio
190	imt
191	mvl
192	reachDSL
193	frDlciEndPt
194	atmVciEndPt
195	opticalChannel
196	opticalTransport
197	propAtm
198	voiceOverCable
199	infiniband
200	teLink
201	q2931
202	virtualTg
203	sipTg
204	sipSig
205	docsCableUpstreamChannel
206	econet
207	pon155
208	pon622
209	bridge
210	linegroup
211	voiceEMFGD
212	voiceFGDEANA
213	voiceDID
214	mpegTransport
215	sixToFour
216	gtp
217	pdnEtherLoop1
218	pdnEtherLoop2
219	opticalChannelGroup
220	homepna
221	gfp
222	ciscoISLvlan
223	actelisMetaLOOP
224	fcipLink
225	rpr
226	qam
227	lmp
228	cblVectaStar
229	docsCableMCmtsDownstream
230	adsl2
231	macSecControlledIF
232	macSecUncontrolledIF
233	aviciOpticalEther
234	atmbond
235	voiceFGDOS
236	mocaVersion1
237	ieee80216WMAN
238	adsl2plus
239	dvbRcsMacLayer
240	dvbTdm
241	dvbRcsTdma
242	x86Laps
243	wwanPP
244	wwanPP2
245	voiceEBS
246	ifPwType
247	ilan
248	pip
249	aluELP
250	gpon
251	vdsl2
252	capwapDot11Profile
253	capwapDot11Bss
254	capwapWtpVirtualRadio
255	bits
256	docsCableUpstreamRfPort
257	cableDownstreamRfPort
258	vmwareVirtualNic
259	ieee802154
260	otnOdu
261	otnOtu
262	ifVfiType
263	g9981
264	g9982
265	g9983
266	aluEpon
267	aluEponOnu
268	aluEponPhysicalUni
269	aluEponLogicalLink
270	aluGponOnu
271	aluGponPhysicalUni
272	vmwareNicTeam
277	docsOfdmDownstream
278	docsOfdmaUpstream
279	gfast
280	sdci
281	xboxWireless
282	fastdsl
283	docsCableScte55d1FwdOob
284	docsCableScte55d1RetOob
285	docsCableScte55d2DsOob
286	docsCableScte55d2UsOob
287	docsCableNdf
288	docsCableNdr
289	ptm
290	ghn
291	otnOtsi
292	otnOtuc
293	otnOduc
294	otnOtsig
295	microwaveCarrierTermination
296	microwaveRadioLinkTerminal
297	ieee8021axDrni
298	ax25
299	ieee19061nanocom
300	cpri
301	omni
302	roe
303	p2pOverLan

.1.3.6.1.4.1.248.11.10.1.6.2.1.7

hm2IfaceExtTable

table

.1.3.6.1.4.1.248.11.10.1.6.3 · 1 row entry · 1 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2IfaceExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2IfaceExtTable'

This table contains additional information about the interfaces.

hm2IfaceExtEntry row .1.3.6.1.4.1.248.11.10.1.6.3.1

Indexes

Column Syntax OID

hm2IfaceExtIfRole

The current role of the interface.

Enumeration

Enumerated Values:

6	ethernetCsmacd
24	softwareLoopback
136	l3ipvlan
161	ieee8023adLag
169	shdsl
1001	ringPort
1002	subringPort
1003	couplingPort
1004	routerPort
1005	probePort
1006	cpuPort
1007	servicePort
1008	outOfBandMgmtPort
1101	lagMember
1102	lreMember
1201	lreInterface
1202	ringLagInterface

.1.3.6.1.4.1.248.11.10.1.6.3.1.1

hm2SfpInfoTable

table

.1.3.6.1.4.1.248.11.10.1.7.1 · 1 row entry · 25 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2SfpInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2SfpInfoTable'

This table contains variables for each SFP.

hm2SfpInfoEntry row .1.3.6.1.4.1.248.11.10.1.7.1.1

Entry for a detected SFP.

Indexes

Column Syntax OID

hm2SfpModuleType

Type of the module. SFP or SFP+ (3), XFP (6).

Enumeration

Enumerated Values:

3	sfp
6	xfp

.1.3.6.1.4.1.248.11.10.1.7.1.1.1

hm2SfpMediaType

The SFP's Media Type

Enumeration

Enumerated Values:

1	ge-1000-base-sx
2	ge-1000-base-lx
4	ge-1000-base-cx
5	fe-100base-lx
6	fe-100base-fx
8	ge-1000-base-t
9	unsupported
10	oc3-mm-sr
11	oc3-sm-ir
12	oc3-sm-lr
13	oc12-mm-sr
14	oc12-sm-ir
15	oc12-sm-lr
16	oc48-sr
17	oc48-ir
18	oc48-lr
30	xfp-10gbase-sr
31	xfp-10gbase-lr
32	xfp-10gbase-er
40	microfx
41	pof
50	m-sfp-2500

.1.3.6.1.4.1.248.11.10.1.7.1.1.2

hm2SfpConnector

The SFP's Connector Type.

Enumeration

Enumerated Values:

1	nonSfp
6	fiberjack
7	lc
8	mtrj
11	opticalPigtail
33	copperPigtail
34	rj45
128	vendorSpecific

.1.3.6.1.4.1.248.11.10.1.7.1.1.3

hm2SfpVendorName

The SFP's vendor name (ASCII).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.1.1.4

hm2SfpVendorOUI

The vendor organizationally unique identifier field (OUI).

OctetString

.1.3.6.1.4.1.248.11.10.1.7.1.1.5

hm2SfpPartNumber

The part number of the module (ASCII).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.1.1.6

hm2SfpPartRev

The revision number of the module (ASCII).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.1.1.7

hm2SfpSerialNum

The SFP's serial number provided by vendor (ASCII).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.1.1.8

hm2SfpDateCode

The SFP's vendor manufacturing date code. Format is YY:MM:DD.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.1.1.9

hm2SfpInfoVersion

Version of SFP's Hirschmann information.
Contains -1 in case of a device read error.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.10

hm2SfpInfoPartNumber

Part Number of SFP's Hirschmann information.

OctetString

Constraints:
range: 0-11

.1.3.6.1.4.1.248.11.10.1.7.1.1.11

hm2SfpInfoPartId

Part Identifier of SFP's Hirschmann information.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.248.11.10.1.7.1.1.12

hm2SfpBitRateNominal

The SFP's nominal bitrate in units of MBits/sec.
Contains -1 in case of a device read error.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.13

hm2SfpBitRateMin

The minimum bit rate is specified in
units of 100 Megabits per second, rounded off
to the nearest 100 Megabits per second.
A value of 0 indicates that the minimum bit rate
is not specified.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.14

hm2SfpBitRateMax

The maximum bit rate is specified in
units of 100 Megabits per second, rounded off
to the nearest 100 Megabits per second.
A value of 0 indicates that the maximum bit rate
is not specified.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.15

hm2SfpMaxLength-fiber-9

Max. usable length for the cable type '9/125 micrometer fiber'
with this SFP in units of meters.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.16

hm2SfpMaxLength-fiber-50

Max. usable length for the cable type '50/125 micrometer fiber'
with this SFP in units of meters.

hm2SfpMaxLength-fiber-e50

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.17

Max. usable length for the cable type 'EBW 50/125 micrometer fiber'
with this SFP in units of meters or -1 if not supported.

hm2SfpMaxLength-fiber-62-5

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.18

Max. usable length for the cable type '62.5/125 micrometer fiber'
with this SFP in units of meters.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.19

hm2SfpMaxLength-copper

Max. usable length for the cable type 'copper'
with this SFP in units of meters.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.20

hm2SfpWaveLength

Nominal transmitter output wavelength at room temperature.
The laser wavelength in nm (units of 0.05nm).

hm2SfpWaveLengthTolerance

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.21

The +/- range of transmitter output wavelength under normal operating conditions
or -1 if not supported.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.1.1.22

hm2SfpEnhancedOptions

Not supported.

Bits

Enumerated Values:

none

.1.3.6.1.4.1.248.11.10.1.7.1.1.23

hm2SfpSupported

The SFP is supported by the device (true) or not (false).

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.248.11.10.1.7.1.1.24

hm2SfpSupportedReason

The reason why this SFP is supported.

Enumeration

Enumerated Values:

1	hirschmannID
2	whiteList
3	wrongSpeed
4	noneEthernet
5	tpSfpNotSupported
6	otnID

.1.3.6.1.4.1.248.11.10.1.7.1.1.25

hm2SfpDiagTable

table

.1.3.6.1.4.1.248.11.10.1.7.2 · 1 row entry · 7 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2SfpDiagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2SfpDiagTable'

This table contains variables for each SFP.

hm2SfpDiagEntry row .1.3.6.1.4.1.248.11.10.1.7.2.1

Entry for a detected SFP.

Indexes

Column Syntax OID

hm2SfpCurrentBitRate

The current bit rate in units of Megabits per second.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.2.1.1

hm2SfpCurrentTemperature

This signed integer is used to identify
the temperature within the SFP in units of centigrade (Celsius).
Contains -1000 in case of a device read error.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.2.1.2

hm2SfpCurrentTxPower

The SFP's internally measured Tx Power in units of 1/10 microwatt
or -1 if it is not supported.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.2.1.3

hm2SfpCurrentRxPower

The SFP's internally measured Rx Power in units of 1/10 microWatts
or -10000 if not supportted.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.7.2.1.4

hm2SfpCurrentTxPowerdBm

The SFP's internally measured Tx Power in units of dBm.
(ASCII representation of a floating point number).
- if not supported.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.2.1.5

hm2SfpCurrentRxPowerdBm

The SFP's internally measured Rx Power in units of dBm.
(ASCII representation of a floating point number).
- if not supported.

hm2SfpCurrentRxPowerState

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.7.2.1.6

The state of the SFP's internally measured Rx.

Enumeration

Enumerated Values:

1	ok
2	warning
3	alarm
4	unsupported

.1.3.6.1.4.1.248.11.10.1.7.2.1.7

hm2SfpThresholdTable

table

.1.3.6.1.4.1.248.11.10.1.7.4 · 1 row entry · 20 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2SfpThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2SfpThresholdTable'

This table contains the thresholds for each SFP.

hm2SfpThresholdEntry row .1.3.6.1.4.1.248.11.10.1.7.4.1

Entry for a detected SFP.

Indexes

Column	Syntax	OID
hm2SfpTemperatureHighAlarm The SFP's Temperature High Alarm threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.1`
hm2SfpTemperatureHighWarning The SFP's Temperature High Warning threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.2`
hm2SfpTemperatureLowAlarm The SFP's Temperature Low Alarm threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.3`
hm2SfpTemperatureLowWarning The SFP's Temperature Low Warning threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.4`
hm2SfpTxPowerHighAlarm The SFP's Tx Power High Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.5`
hm2SfpTxPowerHighWarning The SFP's Tx Power High Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.6`
hm2SfpTxPowerLowAlarm The SFP's Tx Power Low Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.7`
hm2SfpTxPowerLowWarning The SFP's Tx Power Low Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.8`
hm2SfpRxPowerHighAlarm The SFP's Rx Power High Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.9`
hm2SfpRxPowerHighWarning The SFP's Rx Power High Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.10`
hm2SfpRxPowerLowAlarm The SFP's Rx Power Low Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.11`
hm2SfpRxPowerLowWarning The SFP's Rx Power Low Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.12`
hm2SfpTxPowerdBmHighAlarm The SFP's Tx Power High Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.13`
hm2SfpTxPowerdBmHighWarning The SFP's Tx Power High Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.14`
hm2SfpTxPowerdBmLowAlarm The SFP's Tx Power Low Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.15`
hm2SfpTxPowerdBmLowWarning The SFP's Tx Power Low Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.16`
hm2SfpRxPowerdBmHighAlarm The SFP's Rx Power High Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.17`
hm2SfpRxPowerdBmHighWarning The SFP's Rx Power High Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.18`
hm2SfpRxPowerdBmLowAlarm The SFP's Rx Power Low Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.19`
hm2SfpRxPowerdBmLowWarning The SFP's Rx Power Low Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.248.11.10.1.7.4.1.20`

hm2ExtNvmTable

table

.1.3.6.1.4.1.248.11.10.1.8.2 · 1 row entry · 12 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2ExtNvmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2ExtNvmTable'

This table contains variables for each nvram.

hm2ExtNvmEntry row .1.3.6.1.4.1.248.11.10.1.8.2.1

Entry for an external nvram.

Indexes

hm2ExtNvmTableIndex

Column Syntax OID

hm2ExtNvmTableIndex

Index

Hm2DeviceExtNVMType

Type Values:

0	none
1	sd
2	usb
3	serial

.1.3.6.1.4.1.248.11.10.1.8.2.1.1

hm2ExtNvmStatus

Status of the external non-volatile memory.
notPresent(1): external non-volatile memory has not been detected.
removed(2): external non-volatile memory was removed in running mode of the agent.
ok(3): external non-volat…

Enumeration

Enumerated Values:

1	notPresent
2	removed
3	ok
4	outOfMemory
5	genericErr

.1.3.6.1.4.1.248.11.10.1.8.2.1.2

hm2ExtNvmManufacturerId

The manufacturer ID.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.8.2.1.3

hm2ExtNvmHWRevision

The application ID.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.8.2.1.4

hm2ExtNvmProductName

The product name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.8.2.1.5

hm2ExtNvmVersion

The version.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.8.2.1.6

hm2ExtNvmSerialNum

The serial number provided by vendor (ASCII).

hm2ExtNvmAutomaticSoftwareLoad

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.10.1.8.2.1.7

Enable or disable Automatic loading of a software image
from the external non-volatile memory. A file named 'startup.txt'
must be present on the external non-volatile memory and contain the
line 'autoUpdate=filename'.

hm2ExtNvmConfigLoadPriority

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.10.1.8.2.1.8

Set the priority of this external non-volatile memory for
loading the configuration while booting. The configuration
on the device with the lowest priority is loaded.
Setting this variable to 0 disables loading of a con…

Enumerationr/w

Enumerated Values:

0	disable
1	first
2	second
3	third

.1.3.6.1.4.1.248.11.10.1.8.2.1.9

hm2ExtNvmConfigSave

Enable or disable Automatic saving of the configuration to the
external non-volatile memory. If this is enabled, saving the
configuration of the device to its internal nvram also stores
in on this external nvram.

HM2-TC-MIBHmEnabledStatus

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.10.1.8.2.1.10

hm2ExtNvmWritable

Shows if writing to the device is possible, i.e. if it is
write protected.

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.10.1.8.2.1.11

hm2ExtNvmAutomaticSshKeyLoad

Enable or disable automatic loading of a SSH key
from the external non-volatile memory. A file named 'startup.txt'
must be present on the external non-volatile memory and contain
the line 'autoUpdateRSA=' and/or 'autoU…

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.10.1.8.2.1.12

hm2AutoDisableIntfTable

table

.1.3.6.1.4.1.248.11.10.1.9.1 · 1 row entry · 7 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2AutoDisableIntfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2AutoDisableIntfTable'

Port Auto Disable interface table.

hm2AutoDisableIntfEntry row .1.3.6.1.4.1.248.11.10.1.9.1.1

Port Auto Disable interface entry.

Indexes

hm2AutoDisableIntfRemainingTime

Column Syntax OID

Remaining time in seconds until the re-activation of the port.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.10.1.9.1.1.1

hm2AutoDisableIntfComponentName

Name of the component that triggered the error

hm2AutoDisableIntfErrorReason

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.9.1.1.2

Error disable reason

Enumeration

Enumerated Values:

0	none
1	link-flap
2	crc-error
3	duplex-mismatch
4	dhcp-snooping
5	arp-rate
6	bpdu-rate
7	mac-based-port-security
8	overload-detection
9	speed-duplex
10	loop-protection

.1.3.6.1.4.1.248.11.10.1.9.1.1.3

hm2AutoDisableIntfTimer

Timer value in seconds after a deactivated port is activated again.
Possible values are: 30-4294967295.
A value of 0 disables the timer.

Unsigned32r/w

Constraints:
range: 0-0
range: 30-4294967295

.1.3.6.1.4.1.248.11.10.1.9.1.1.4

hm2AutoDisableIntfReset

Port Auto Disable interface reset.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.248.11.10.1.9.1.1.5

hm2AutoDisableIntfOperState

Status of Auto Disable interface admin state.
Active means that a component has encountered an error
and Auto-Disable has turned off the interface.
Inactive means that currently there is no error

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.248.11.10.1.9.1.1.6

hm2AutoDisableIntfErrorTime

Local system time (hm2SystemLocalTime) when the error occured.

HM2-TC-MIBHmTimeSeconds1970

.1.3.6.1.4.1.248.11.10.1.9.1.1.7

hm2AutoDisableReasonTable

table

.1.3.6.1.4.1.248.11.10.1.9.2 · 1 row entry · 3 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2AutoDisableReasonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2AutoDisableReasonTable'

Possible reasons for Auto Disable

hm2AutoDisableReasonEntry row .1.3.6.1.4.1.248.11.10.1.9.2.1

Port Auto Disable interface entry.

Indexes

hm2AutoDisableReasons

Column Syntax OID

hm2AutoDisableReasons

Reason for deactivation a port

Enumeration

Enumerated Values:

1	link-flap
2	crc-error
3	duplex-mismatch
4	dhcp-snooping
5	arp-rate
6	bpdu-rate
7	mac-based-port-security
8	overload-detection
9	speed-duplex
10	loop-protection

.1.3.6.1.4.1.248.11.10.1.9.2.1.1

hm2AutoDisableReasonOperation

Enables/disables recovery by resaon on this device.

hm2AutoDisableReasonCategory

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.10.1.9.2.1.2

Auto Disable Reason Category

Enumeration

Enumerated Values:

1	other
2	port-monitor
3	network-security
4	l2-redundancy

.1.3.6.1.4.1.248.11.10.1.9.2.1.3

hm2UnitTable

table

.1.3.6.1.4.1.248.11.10.1.10.100 · 1 row entry · 3 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2UnitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2UnitTable'

This table contains unit capabilities and
configuration options.

hm2UnitEntry row .1.3.6.1.4.1.248.11.10.1.10.100.1

Entry with the configuration options and supported
features of a unit.

Indexes

hm2UnitIndex

Column	Syntax	OID
hm2UnitIndex The index of the available unit.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.10.100.1.1`
hm2UnitMaxModuleCapacity Maximum number of modules that this unit can contain in this system.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.10.100.1.2`
hm2UnitMaxModulePortCapacity Maximum number of ports that a module can contain in this unit.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.10.1.10.100.1.3`

hm2ModuleTable

table

.1.3.6.1.4.1.248.11.10.1.11.100 · 1 row entry · 15 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2ModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-DEVMGMT-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-DEVMGMT-MIB::hm2ModuleTable'

This table contains capabilities and
configuration options of device modules.

hm2ModuleEntry row .1.3.6.1.4.1.248.11.10.1.11.100.1

Entry with the configuration options and supported
features of a device module.

Indexes

hm2UnitIndex hm2ModuleIndex

Column Syntax OID

hm2ModuleIndex

The index of the available module.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.11.100.1.1

hm2ModuleId

Manufacturer-defined product identifier (module family + product ID).
Example: Object-ID 1.3.6.1.4.1.248.11.2.2.1 is the hm2ModuleFamily MSM and
Object-ID 1.3.6.1.4.1.248.11.2.2.1.1 is the Product ID for msm-4tx

ObjectIdentifier

.1.3.6.1.4.1.248.11.10.1.11.100.1.2

hm2ModuleDescription

Description of the module. This value cannot be written by external
entities (only for internal purposes).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.11.100.1.3

hm2ModuleProductCode

Product Code of the module.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.11.100.1.4

hm2ModuleVersion

Version of the module.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.11.100.1.5

hm2ModuleNumOfPorts

The numberOfPorts is the number of ports contained within
the module. Within each module, the ports are uniquely
numbered in the range from 1 to numberOfPorts.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.11.100.1.6

hm2ModuleFirstMauIndexobsolete

Value of the first mauIndex used by the module.
**NOTE: This object is obsolete in favour of hm2ModuleFirstIfIndex.**

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.10.1.11.100.1.7

hm2ModuleStatus

Status of the module.
If the value is physical(1), then the module is plugged in,
if the value is configurable, the ports can be configured,
but the card is absent, with the value remove(3) written to
the agent the card…

Enumerationr/w

Enumerated Values:

1	physical
2	configurable
3	remove
4	fix

.1.3.6.1.4.1.248.11.10.1.11.100.1.8

hm2ModuleSerialNum

The serial number provided by vendor (ASCII).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.10.1.11.100.1.9

hm2ModuleMinSWVersion

The minimum software version required to support this module.