HH3C-WLAN-FLEXAPP-CFG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
90

hh3cWlanModuleConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanModuleConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanModuleConfigTable' 
Administrators must configure module parameters for a module to operate.
hh3cWlanModuleConfigEntry row .1.3.6.1.4.1.25506.2.75.19.1.1.1
Each entry contains module configuration information.
Indexes
Column Syntax OID
hh3cWlanAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.1
hh3cWlanModuleID
This object represents the module ID of a module.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.2
hh3cWlanModuleType
This object represents the type of a module.
Enumerationr/w
Enumerated Values:
0none
1ble
2iot
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.3
hh3cWlanModuleStatus
This object represents the enabled or disabled status of a module.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.4
hh3cWlanModuleReset
When read the value from the node
none: Represents the module has been rebooted and the status of the module is normal.
When write the value to the node
reboot: Represents module rebooting. Other values are not support…
Enumerationr/w
Enumerated Values:
0none
1reboot
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.5
hh3cWlanModuleRstFac
When read the value from the node
none: Represents the module has been restored and the status of the module is normal.
When write the value to the node
restore: Represents module restoring. Other values are not suppor…
Enumerationr/w
Enumerated Values:
0none
1restore
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.6
hh3cWlanModuleUpWareStatus
This object represents the enabled or disabled status of module auto update.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.7
hh3cWlanModuleTxPower
This object represents the packet transmit power.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.25506.2.75.19.1.1.1.8
hh3cWlanModuleManualUpdate
This object represents the file path for module firmware updating.
OctetStringr/w .1.3.6.1.4.1.25506.2.75.19.1.1.1.9

hh3cWlanModuleInfoTable

table
.1.3.6.1.4.1.25506.2.75.19.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanModuleInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanModuleInfoTable' 
The table contains information about each module of an AP.
hh3cWlanModuleInfoEntry row .1.3.6.1.4.1.25506.2.75.19.1.2.1
Each entry contains IOT module information.
Indexes
Column Syntax OID
hh3cDot11IOTAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.1.2.1.1
hh3cDot11IOTModuleID
This object represents a module.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.1.2.1.2
hh3cDot11IOTModuleType
This object represents the type of a module.
Enumeration
Enumerated Values:
0none
1h3c
2iot
 .1.3.6.1.4.1.25506.2.75.19.1.2.1.3
hh3cDot11IOTModuleModel
This object represents the model of a module.
OctetString .1.3.6.1.4.1.25506.2.75.19.1.2.1.4
hh3cDot11IOTModuleHwVersion
This object represents the hardware version of a module.
OctetString .1.3.6.1.4.1.25506.2.75.19.1.2.1.5
hh3cDot11IOTModuleSwVersion
This object represents the software version of a module.
OctetString .1.3.6.1.4.1.25506.2.75.19.1.2.1.6
hh3cDot11IOTModuleSerialId
This object represents the sequence ID of a module.
OctetString .1.3.6.1.4.1.25506.2.75.19.1.2.1.7

hh3cWlanIOTConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanIOTConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanIOTConfigTable' 
Administrators must configure IOT parameters.
hh3cWlanIOTConfigEntry row .1.3.6.1.4.1.25506.2.75.19.2.1.1
Each entry contains module configuration information.
Indexes
Column Syntax OID
hh3cWlanIOTAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.2.1.1.1
hh3cWlanIOTEngineAdd
This object represents the IPv4 address of the location server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.75.19.2.1.1.2
hh3cWlanIOTEnginePort
This object represents the UDP port to listen for IOT messages from the server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.2.1.1.3

hh3cWlanBLEConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.4.1 · 1 row entry · 14 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanBLEConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanBLEConfigTable' 
Administrators must configure Bluetooth Low Energy (BLE) parameters.
hh3cWlanBLEConfigEntry row .1.3.6.1.4.1.25506.2.75.19.4.1.1
Each entry contains BLE location configuration information.
Indexes
Column Syntax OID
hh3cWlanBLEAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.1
hh3cWlanBLEStatus
This object represents the enabled or disabled status of BLE location.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.2
hh3cWlanBLEEngineAdd
This object represents the server's IPv4 address to which BLE messages are sent.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.3
hh3cWlanBLEEnginePort
This object represents the UDP port of the location server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.4
hh3cWlanBLEVendorPort
This object represents the UDP port to listen for BLE messages from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.5
hh3cWlanBLERssiStatus
This object represents the enabled or disabled status of BLE RSSI-based packet filtering.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.6
hh3cWlanBLERssiThreshold
This object represents the max RSSI value of clients' packets.
Integer32r/w
Constraints:
range: 5-255
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.7
hh3cWlanBLEConnectPassword
This object represents the BLE module connection password.
OctetStringr/w
Constraints:
range: 4-4
range: 0-0
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.8
hh3cWlanBLECommandPassword
This object represents the BLE module command password.
OctetStringr/w
Constraints:
range: 0-0
range: 12-12
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.9
hh3cWlanBLEReportStatus
This object represents the enabled or disabled status of BLE location reporting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.10
hh3cWlanBLEReportInterval
This object represents the interval at which an AP sends BLE messages to the server.
SecondInteger32r/w
Constraints:
range: 1-86400
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.11
hh3cWlanBLEAgingTime
This object represents the aging time for iBeacon devices.
SecondInteger32r/w
Constraints:
range: 60-3600
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.12
hh3cWlanBLERealTimeReportStatus
This object represents the enabled or disabled status of BLE realtime reporting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.13
hh3cWlanBLERealTimePrefix
This object represents the manufacturer prefix of BLE devices to
be located. The prefix must be an even number.
OctetStringr/w
Constraints:
range: 0-0
range: 8-18
 .1.3.6.1.4.1.25506.2.75.19.4.1.1.14

hh3cWlanBLEModuleConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.4.2 · 1 row entry · 7 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanBLEModuleConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanBLEModuleConfigTable' 
Administrators must configure BLE module parameters.
hh3cWlanBLEModuleConfigEntry row .1.3.6.1.4.1.25506.2.75.19.4.2.1
Each entry contains BLE module configuration information.
Indexes
Column Syntax OID
hh3cWlanBLEModuleAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.1
hh3cWlanBLEModuleID
This object represents the ID of a module.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.2
hh3cWlanBLEAdvReportStatus
This object represents the enabled or disabled status of BLE advertisement reporting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.3
hh3cWlanBLEAdvReportInterval
This object represents the interval at which a BLE module sends advertisement packets.
SecondInteger32r/w
Constraints:
range: 50-1000
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.4
hh3cWlanBLEAdvUUID
This object represents the UUID of BLE advertisement packets.
OctetStringr/w
Constraints:
range: 0-0
range: 32-32
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.5
hh3cWlanBLEAdvMajorID
This object represents the major ID of BLE advertisement packets.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.6
hh3cWlanBLEAdvMinorID
This object represents the minor ID of BLE advertisement packets.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.4.2.1.7

hh3cWlanAEConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.5.1 · 1 row entry · 10 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanAEConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanAEConfigTable' 
Administrators must configure AeroScout (AE) parameters.
hh3cWlanAEConfigEntry row .1.3.6.1.4.1.25506.2.75.19.5.1.1
Each entry contains AE location configuration information.
Indexes
Column Syntax OID
hh3cWlanAEAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.1
hh3cWlanAEStatus
This object represents the enabled or disabled status of AE location.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.2
hh3cWlanAEEngineAddr
This object represents the server's IPv4 address to which AE messages are sent.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.3
hh3cWlanAEEnginePort
This object represents the UDP port of the location server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.4
hh3cWlanAEVendorPort
This object represents the UDP port to listen for AE messages from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.5
hh3cWlanAETimeStamp
This object represents the enabled or disabled status of timestamp.
Enumerationr/w
Enumerated Values:
1absolute
2relative
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.6
hh3cWlanAEVersion
This object represents the version of the AE protocol.
Enumerationr/w
Enumerated Values:
2v2
3v3
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.7
hh3cWlanAETagMultiAddr
This object represents Tag's multicast MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.8
hh3cWlanAEEngineDetection
This object represents the location mode.
Enumerationr/w
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.9
hh3cWlanAEReportMode
This object represents the report mode.
Enumerationr/w
Enumerated Values:
1local
2central
 .1.3.6.1.4.1.25506.2.75.19.5.1.1.10

hh3cWlanAERadioConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.5.2 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanAERadioConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanAERadioConfigTable' 
Administrators must configure AE parameters.
hh3cWlanAERadioConfigEntry row .1.3.6.1.4.1.25506.2.75.19.5.2.1
Each entry contains AE location configuration information.
Indexes
Column Syntax OID
hh3cWlanAERadioAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.5.2.1.1
hh3cWlanAEAPRadioID
This object represents the ID of a radio.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.5.2.1.2
hh3cWlanAERadioStatus
This object represents the enabled or disabled status of radio-based location.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.5.2.1.3
hh3cWlanAEMUStatus
This object represents the status of MU message reporting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.5.2.1.4
hh3cWlanAETagStatus
This object represents the status of Tag message reporting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.5.2.1.5

hh3cWlanCommonConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.6.1 · 1 row entry · 14 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanCommonConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanCommonConfigTable' 
Administrators must configure common parameters.
hh3cWlanCommonConfigEntry row .1.3.6.1.4.1.25506.2.75.19.6.1.1
Each entry contains common configuration information.
Indexes
Column Syntax OID
hh3cWlanCommonAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.1
hh3cWlanDilutionStatus
This object represents the enabled or disabled status of packet dilution.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.2
hh3cWlanDilutionFactor
This object represents the packet dilution factor.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.3
hh3cWlanDilutionTimeout
This object represents the packet dilution timeout.
SecondInteger32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.4
hh3cWlanIgnoreBeacon
This object represents the enabled or disabled status of beacon ignoring.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.5
hh3cWlanRateLimitStatus
This object represents the enabled or disabled status of location packet rate limiting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.6
hh3cWlanRateLimitCir
This object represents the CIR for sending location packets.
KbpsInteger32r/w
Constraints:
range: 0-0
range: 8-1300000
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.7
hh3cWlanRateLimitCbs
This object represents the CBS for sending location packets.
BytesInteger32r/w
Constraints:
range: 500-130000000
range: 0-0
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.8
hh3cWlanClientRateLimitStatus
This object represents the enabled or disabled status of client packet rate limiting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.9
hh3cWlanClientRateLimitCir
This object represents the CIR for receiving client packets.
KbpsInteger32r/w
Constraints:
range: 0-1300000
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.10
hh3cWlanClientRateLimitCbs
This object represents the CBS for receiving client packets.
BytesInteger32r/w
Constraints:
range: 0-0
range: 80-130000000
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.11
hh3cWlanRssiStatus
This object represents the enabled or disabled status of RSSI-based packet filtering.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.12
hh3cWlanRssiThreshold
This object represents the max RSSI value of clients' packets.
Integer32r/w
Constraints:
range: 5-100
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.13
hh3cWlanIgnoreApFrame
This object represents the enabled or disabled status of AP packet ignoring.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.6.1.1.14

hh3cWlanCUPIDConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.7.1 · 1 row entry · 11 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanCUPIDConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanCUPIDConfigTable' 
Administrators must configure CUPID parameters.
hh3cWlanCUPIDConfigEntry row .1.3.6.1.4.1.25506.2.75.19.7.1.1
Each entry contains CUPID location configuration information.
Indexes
Column Syntax OID
hh3cWlanCupidAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.1
hh3cWlanCupidStatus
This object represents the status of CUPID location.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.2
hh3cWlanCupidEngineAddr
This object represents the IPv4 address of the CUPID location server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.3
hh3cWlanCupidEnginePort
This object represents the UDP port of the CUPID location server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.4
hh3cWlanCupidVendorPort
This object represents the UDP port to listen for CUPID messages from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.5
hh3cWlanCupidReportStatus
This object represents the status of CUPID location reporting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.6
hh3cWlanCupidReportInterval
This object represents the interval for sending CUPID location packets.
SecondInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.7
hh3cWlanCupidUnassSta
This object represents the status of unassociated client information
reporting for CUPID location.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.8
hh3cWlanCupidUnassMeasureSta
This object represents the status of CUPID location for unassociated clients.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.9
hh3cWlanCupidReportMode
This object represents the report mode.
Enumerationr/w
Enumerated Values:
1local
2central
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.10
hh3cWlanCUPIDReportFormat
This object represents the report format.
Enumerationr/w
Enumerated Values:
1general
2lightweight
 .1.3.6.1.4.1.25506.2.75.19.7.1.1.11

hh3cWlanFPConfigTable

table
.1.3.6.1.4.1.25506.2.75.19.8.1 · 1 row entry · 10 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cWlanFPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-WLAN-FLEXAPP-CFG-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-WLAN-FLEXAPP-CFG-MIB::hh3cWlanFPConfigTable' 
Administrators must configure RF fingerprinting parameters.
hh3cWlanFPConfigEntry row .1.3.6.1.4.1.25506.2.75.19.8.1.1
Each entry contains RF fingerprinting configuration information.
Indexes
Column Syntax OID
hh3cWlanFPAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.1
hh3cWlanFPStatus
This object represents the enabled or disabled status of RF fingerprinting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.2
hh3cWlanFPEngineAddr
This object represents the IPv4 address of the RF fingerprinting server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.3
hh3cWlanFPEnginePort
This object represents the UDP port of the RF fingerprinting server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.4
hh3cWlanFPVendorPort
This object represents the UDP port to listen for RF fingerprinting
packets from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.5
hh3cWlanFPRawFrameReport
This object represents the status of raw frame reporting for RF fingerprinting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.6
hh3cWlanFPMUReport
This object represents the status of MU information reporting for RF fingerprinting.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.7
hh3cWlanFPReportMode
This object represents the report mode.
Enumerationr/w
Enumerated Values:
1local
2central
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.8
hh3cWlanFPReportFormat
This object represents the report format.
Enumerationr/w
Enumerated Values:
1general
2lightweight
3cupidhybrid
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.9
hh3cWlanFPTagMultiAddr
This object represents Tag's multicast MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.75.19.8.1.1.10