HH3C-TWAMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
10
Rows
10
Columns
80
.1.3.6.1.4.1.25506.2.184.2.1.3 · 1 row entry · 23 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightClientTable'
Defines TWAMP-light control-client test session parameter configuration.
hh3cTwamplightClientEntry row .1.3.6.1.4.1.25506.2.184.2.1.3.1
Defines an entry in the hh3cTwamplightClientTable.
Column Syntax OID
The session ID of the TWAMP-light test.
Integer32
Constraints:
range: 1-512
.1.3.6.1.4.1.25506.2.184.2.1.3.1.1
Specifies the type of the source address,
hh3cTwamplightClientSrcAddr, to be used at a remote host
when performing the TWAMP-light test.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.184.2.1.3.1.2
Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the source…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.184.2.1.3.1.3
Specifies the type of host address to be used at a remote
host for performing a TWAMP-light test.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.184.2.1.3.1.4
Specifies the host address to be used at a remote host for
performing a TWAMP-light test. The host address type is
determined by the object value of corresponding
hh3cTwamplightClientTrgtAddrType.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.184.2.1.3.1.5
The source port be used by a TWAMP-light test.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.25506.2.184.2.1.3.1.6
The destination port that be used by a TWAMP-light test.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.25506.2.184.2.1.3.1.7
VPN name by which system finds route in the specified VPN
to send TWAMP probe packets.
OctetStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.25506.2.184.2.1.3.1.8
Specifies the value to store in the Differentiated
Services Code Point (DSCP) in the IP packet used to
encapsulate the TWAMP probe. The DSCP field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as th…
Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.25506.2.184.2.1.3.1.9
Specifies the size of the data portion to be
transmitted in a TWAMP operation in octets.
octetsInteger32r/w
Constraints:
range: 44-1518
.1.3.6.1.4.1.25506.2.184.2.1.3.1.10
A comment describing this session.
OctetStringr/w
Constraints:
range: 0-200
.1.3.6.1.4.1.25506.2.184.2.1.3.1.11
This object allows entries to be created and deleted
in the hh3cTwamplightClientTable. Deletion of an entry
in this table results in deletion of all corresponding (same
hh3cTwamplightControllerID index values)
hh3cTwam…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.184.2.1.3.1.12
The source interface for the probe packets.
OctetStringr/w
Constraints:
range: 0-47
.1.3.6.1.4.1.25506.2.184.2.1.3.1.13
An Ethernet service instance by its ID for test.
octetsUnsigned32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.25506.2.184.2.1.3.1.14
The destination MAC address for the TWAMP-light test.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.25506.2.184.2.1.3.1.15
The source MAC address for the TWAMP-light test.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.25506.2.184.2.1.3.1.16
The timestamp format for probe packets in
the TWAMP-light test.
Enumerationr/w
Enumerated Values:
1ntp
2ptp
.1.3.6.1.4.1.25506.2.184.2.1.3.1.17
The payload fill string for each probe packet in the TWAMP-light
test. If the hh3cTwamplightClientDataFillType is string,
the string length is 1 to 200. When hh3cTwamplightClientDataFillType
is hex, the datafill shoul…
OctetStringr/w
Constraints:
range: 1-200
.1.3.6.1.4.1.25506.2.184.2.1.3.1.18
Specify the type of hh3cTwamplightClientDataFill.
Enumerationr/w
Enumerated Values:
1string
2hex
.1.3.6.1.4.1.25506.2.184.2.1.3.1.19
Specify the ID of the VLAN to which the
probe packets belong.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.25506.2.184.2.1.3.1.20
Specify the ID of the custom VLAN to which the
probe packets belong.
The hh3cTwamplightClientSVlanID must be specified
first before the hh3cTwamplightClientCVlanID.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.25506.2.184.2.1.3.1.21
Specify set the 802.1p priority for the probe
packets.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.25506.2.184.2.1.3.1.22
Associate the TWAMP-light test with an interface.
OctetStringr/w
Constraints:
range: 0-47
.1.3.6.1.4.1.25506.2.184.2.1.3.1.23
.1.3.6.1.4.1.25506.2.184.2.1.4 · 1 row entry · 6 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightSenderAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightSenderAdminTable'
Defines TWAMP-light control-sender's management table,
starts or stops TWAMP light test function.  When the
RowStatus is CreatAndGo, only one among hh3cTwamplightSendAdminContinual,
hh3cTwamplightSendAdminDuration, and hh3cTwamplightSendAdminPktCount
must be configured.
hh3cTwamplightSenderAdminEntry row .1.3.6.1.4.1.25506.2.184.2.1.4.1
Defines an entry in the hh3cTwamplightSenderAdminTable.
Column Syntax OID
Defineds to control the TWAMP test type.
true: Permanent test.
false: On demand test.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.25506.2.184.2.1.4.1.1
Defines the duration the session runs for TWAMP test
before being stopped.
Integer32r/w
Constraints:
range: 60-3600
.1.3.6.1.4.1.25506.2.184.2.1.4.1.2
Defines the number of packets to send for TWAMP
test before the session is stopped.
Integer32r/w
Constraints:
range: 100-30000
.1.3.6.1.4.1.25506.2.184.2.1.4.1.3
Defines the interval at which probe packets are sent
for TWAMP test.
Enumerationr/w
Enumerated Values:
1interval10ms
2interval100ms
3interval1s
4interval30s
5interval10s
.1.3.6.1.4.1.25506.2.184.2.1.4.1.4
Defines the timeout time for TWAMP response packets.
Integer32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.25506.2.184.2.1.4.1.5
This object allows entries to be created and deleted
in the hh3cTwamplightSenderAdminTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.184.2.1.4.1.6
.1.3.6.1.4.1.25506.2.184.2.1.5 · 1 row entry · 4 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightSenderStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightSenderStatusTable'
Defines TWAMP-light control-sender's status table.
hh3cTwamplightSenderStatusEntry row .1.3.6.1.4.1.25506.2.184.2.1.5.1
Defines an entry in the hh3cTwamplightSenderStatusTable.
Column Syntax OID
Reflects the operational state of a TWAMP test:
inactive: TWAMP test is in progress.
active: TWAMP test has stopped.
Enumeration
Enumerated Values:
1inactive
2active
.1.3.6.1.4.1.25506.2.184.2.1.5.1.1
Reflects the operational start type of a TWAMP test:
init: Initial status.
continual: Permanent test.
onDemand: On demand test.
Enumeration
Enumerated Values:
0init
1continual
2onDemand
.1.3.6.1.4.1.25506.2.184.2.1.5.1.2
Date and time when the last test started.
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.25506.2.184.2.1.5.1.4
Date and time when the last test stopped.
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.25506.2.184.2.1.5.1.5
.1.3.6.1.4.1.25506.2.184.2.1.6 · 1 row entry · 13 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightTwoWayDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightTwoWayDelayTable'
Defines the statistics result table for TWAMP test.
hh3cTwamplightTwoWayDelayEntry row .1.3.6.1.4.1.25506.2.184.2.1.6.1
Defines an entry in the hh3cTwamplightTwoWayDelayTable.
Column Syntax OID
An entry in this table is created when the statistics
result of a TWAMP test is determined.

An implementation MUST start assigning
hh3cTwamplightTWDelaySeq values at 1 and
wrap after exceeding the maximum…
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.25506.2.184.2.1.6.1.1
The value of time that records the average two-way-delay
value in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.2
The value of time that records the maximum two-way-delay
value in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.3
The value of time that records the minimum two-way-delay
value in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.4
The value of time that records the average jitter value
in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.5
The value of time that records the maximum jitter value
in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.6
The value of time that records the minimum jitter value
in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.7
The value of time that records the average jitter value from
source to destination in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.8
The value of time that records the maximum jitter value from
source to destination in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.9
The value of time that records the minimum jitter value from
source to destination in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.10
The value of time that records the average jitter value from
destination to source in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.11
The value of time that records the maximum jitter value from
destination to source in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.12
The value of time that records the minimum jitter value from
destination to source in the TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.6.1.13
.1.3.6.1.4.1.25506.2.184.2.1.7 · 1 row entry · 7 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightTwoWayLossTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightTwoWayLossTable'
Defines the TWAMP-light loss statistics result Table for providing,
via SNMP.
hh3cTwamplightTwoWayLossEntry row .1.3.6.1.4.1.25506.2.184.2.1.7.1
Defines an entry in the hh3cTwamplightTwoWayLossTable.
Column Syntax OID
An entry in this table is created when statistics
result of a TWAMP test is determined.

An implementation MUST start assigning
hh3cTwamplightTWLossSeq values at 1 and
wrap after exceeding the maximum poss…
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.25506.2.184.2.1.7.1.1
The number of lost packets in a statistical cycle
of a TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.7.1.2
The number of packets were sent in a statistical cycle
of a TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.7.1.3
The number of lost packets number in last 30 statistical
cycle of a TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.7.1.4
The number of packets sent in last 30 statistical
cycle of a TWAMP test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.184.2.1.7.1.5
The number of error packets received in a statistical cycle
of a TWAMP-light test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.184.2.1.7.1.6
The number of error packets received in last 30 statistical
cycles of a TWAMP-light test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.184.2.1.7.1.7
.1.3.6.1.4.1.25506.2.184.2.1.8 · 1 row entry · 1 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightSenderLossSeqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightSenderLossSeqTable'
The largest index value in TWAMP Loss results.
          
When a TWAMP test starts, TWAMP will generats
a set of statistics at regular intervals, and the
index information will be incremented by one for each result.
hh3cTwamplightSenderLossSeqEntry row .1.3.6.1.4.1.25506.2.184.2.1.8.1
Defines an entry in the hh3cTwamplightSenderLossSeqTable.
Column Syntax OID
The largest index value in a TWAMP packet Loss test session.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.25506.2.184.2.1.8.1.1
.1.3.6.1.4.1.25506.2.184.2.1.9 · 1 row entry · 1 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightSendDelaySeqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightSendDelaySeqTable'
The largest index value in TWAMP delay results.
          
When a TWAMP test startes, TWAMP will generates
a set of statistics at regular intervals, and the
index information will be incremented by one for each result.
hh3cTwamplightSendDelaySeqEntry row .1.3.6.1.4.1.25506.2.184.2.1.9.1
Defines an entry in the hh3cTwamplightSendDelaySeqTable. The
operation of this table is same as that of pingResultsTable.
Column Syntax OID
The largest index value in a TWAMP packet delay test session.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.25506.2.184.2.1.9.1.1
.1.3.6.1.4.1.25506.2.184.2.1.10 · 1 row entry · 1 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightResetStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightResetStatTable'
Defines to clear TWAMP test statistics.
hh3cTwamplightResetStatEntry row .1.3.6.1.4.1.25506.2.184.2.1.10.1
Defines an entry in the hh3cTwamplightResetStatTable.
Column Syntax OID
Clear TWAMP test statistics.
single: reset single.
all: reset all.
Enumerationr/w
Enumerated Values:
1single
2all
.1.3.6.1.4.1.25506.2.184.2.1.10.1.1
.1.3.6.1.4.1.25506.2.184.2.1.11 · 1 row entry · 7 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightReactionTable'
Defines TWAMP-light control-client test session reaction
configuration.
hh3cTwamplightReactionEntry row .1.3.6.1.4.1.25506.2.184.2.1.11.1
Defines an entry in the hh3cTwamplightReactionTable.
Column Syntax OID
The second index of hh3cTwamplightReactionTable, It definitely
identifies one of the reaction configurations for TWAMP-light test.
Unsigned32
Constraints:
range: 1-10
.1.3.6.1.4.1.25506.2.184.2.1.11.1.1
A list of reaction condition type.
Enumerationr/w
Enumerated Values:
1twoWayDelay
2twoWayJitter
3twoWayLoss
.1.3.6.1.4.1.25506.2.184.2.1.11.1.2
This object defines an administrative upper-threshold value for
hh3cTwamplightReactCheckElement.
Unsigned32r/w
Constraints:
range: 2-1000000
.1.3.6.1.4.1.25506.2.184.2.1.11.1.3
This object defines an administrative lower-threshold value for
hh3cTwamplightReactCheckElement.
Unsigned32r/w
Constraints:
range: 1-999999
.1.3.6.1.4.1.25506.2.184.2.1.11.1.4
Specifies the type of reaction to generate if the specified
violation type occurs for the monitored element:

none - No reaction is generated
trapOnly - A trap is generated
Enumerationr/w
Enumerated Values:
0none
1trapOnly
.1.3.6.1.4.1.25506.2.184.2.1.11.1.5
This object allows entries to be created and deleted
in the hh3cTwamplightReactionTable. Deletion of an entry
in this table results in deletion of all corresponding (same
hh3cTwamplightControllerID index values)
hh3cTw…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.184.2.1.11.1.6
This object defines current value for the monitored element.
Unsigned32
Constraints:
range: 1-1000000
.1.3.6.1.4.1.25506.2.184.2.1.11.1.7
.1.3.6.1.4.1.25506.2.184.2.2.2 · 1 row entry · 17 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTwamplightResponderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TWAMP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TWAMP-MIB::hh3cTwamplightResponderTable'
Defines the TWAMP-light reflector Table, and configures
TWAMP test session.  When the RowStatus is Active or CreatAndGo,
the source address and target address, source port,
target  port must be configured.  When the RowStatus
is Destroy, Except for fields ResponderID and RowStatus,
The rest can't be configured.
hh3cTwamplightResponderEntry row .1.3.6.1.4.1.25506.2.184.2.2.2.1
Defines an entry in the hh3cTwamplightResponderTable.
Column Syntax OID
TWAMP test session reflector index.
Integer32
Constraints:
range: 1-512
.1.3.6.1.4.1.25506.2.184.2.2.2.1.1
Specifies the type of the source address,
hh3cTwamplightClientSrcAddr, to be used at a remote host
when performing the TWAMP-light test.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.184.2.2.2.1.2
Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address for outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the sourc…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.184.2.2.2.1.3
Specifies the type of host address to be used at a remote
host for performing a TWAMP-light test.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.184.2.2.2.1.4
Specifies the host address to be used at a remote host for
performing a TWAMP-light test. The host address type is
determined by the object value of corresponding
hh3cTwamplightClientTrgtAddrType.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.184.2.2.2.1.5
The source port be used by a TWAMP-light test.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.25506.2.184.2.2.2.1.6
The destination port to be used by a TWAMP-light test.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.25506.2.184.2.2.2.1.7
VPN name by which the system finds route in the specified VPN
to send TWAMP probe packets.
OctetStringr/w
Constraints:
range: 1-31
.1.3.6.1.4.1.25506.2.184.2.2.2.1.8
A comment describing this session.
OctetStringr/w
Constraints:
range: 1-200
.1.3.6.1.4.1.25506.2.184.2.2.2.1.9
This object allows entries to be created and deleted
in the Hh3cTwamplightResponderEntry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.184.2.2.2.1.10
The source interface for the response packets.
OctetStringr/w
Constraints:
range: 0-47
.1.3.6.1.4.1.25506.2.184.2.2.2.1.11
An Ethernet service instance by its ID for test.
octetsUnsigned32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.25506.2.184.2.2.2.1.12
The destination MAC address for the TWAMP-light test.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.25506.2.184.2.2.2.1.13
The source MAC address for the TWAMP-light response message.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.25506.2.184.2.2.2.1.14
The timestamp format for probe packets in the TWAMP-light test.
Enumerationr/w
Enumerated Values:
0auto
1ntp
2ptp
.1.3.6.1.4.1.25506.2.184.2.2.2.1.15
Specify the ID of the VLAN to which the
probe packets belong.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.25506.2.184.2.2.2.1.16
Specify the ID of the custom vlan to which the
probe packets belong.
The hh3cTwamplightRespSVlanID must be specified
first before the hh3cTwamplightRespCVlanID.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.25506.2.184.2.2.2.1.17