HH3C-TRAP-MIB

        This MIB is applicable to routers, switches and other products.
        
Some objects in this may be used only for some specific products,
so users should refer to the related documents to acquire more
detail information.
    
Source file
HH3C-TRAP-MIB
Last revised
Identity
hh3cTrap
Base OID
1.3.6.1.4.1.25506.2.38
Imported Objects
Net-SNMP examples using the hh3c MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HH3C-TRAP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HH3C-TRAP-MIB::hh3cTrap'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-TRAP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-TRAP-MIB::hh3cTrap'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (69)
.1.3.6.1.4.1.25506.2.38
.1.3.6.1.4.1.25506.2.38.1
.1.3.6.1.4.1.25506.2.38.1.1
Enumeration
.1.3.6.1.4.1.25506.2.38.1.1.1
secondsInteger32
.1.3.6.1.4.1.25506.2.38.1.1.2
.1.3.6.1.4.1.25506.2.38.1.1.3
.1.3.6.1.4.1.25506.2.38.1.1.3.1
.1.3.6.1.4.1.25506.2.38.1.1.4
.1.3.6.1.4.1.25506.2.38.1.2
Enumeration
.1.3.6.1.4.1.25506.2.38.1.2.1
secondsInteger32
.1.3.6.1.4.1.25506.2.38.1.2.2
.1.3.6.1.4.1.25506.2.38.1.2.3
.1.3.6.1.4.1.25506.2.38.1.2.3.1
.1.3.6.1.4.1.25506.2.38.1.2.4
.1.3.6.1.4.1.25506.2.38.1.2.5
.1.3.6.1.4.1.25506.2.38.1.2.5.0
.1.3.6.1.4.1.25506.2.38.1.3
.1.3.6.1.4.1.25506.2.38.1.3.1
.1.3.6.1.4.1.25506.2.38.1.3.1.1
Enumeration
.1.3.6.1.4.1.25506.2.38.1.3.1.1.1
Enumeration
.1.3.6.1.4.1.25506.2.38.1.3.1.1.2
Enumeration
.1.3.6.1.4.1.25506.2.38.1.3.2
secondsInteger32
.1.3.6.1.4.1.25506.2.38.1.3.3
.1.3.6.1.4.1.25506.2.38.1.3.4
.1.3.6.1.4.1.25506.2.38.1.3.4.1
.1.3.6.1.4.1.25506.2.38.1.3.4.2
.1.3.6.1.4.1.25506.2.38.1.3.4.3
.1.3.6.1.4.1.25506.2.38.1.3.4.4
.1.3.6.1.4.1.25506.2.38.1.3.5
.1.3.6.1.4.1.25506.2.38.1.3.6
.1.3.6.1.4.1.25506.2.38.1.4
Enumeration
.1.3.6.1.4.1.25506.2.38.1.4.1
secondsInteger32
.1.3.6.1.4.1.25506.2.38.1.4.2
.1.3.6.1.4.1.25506.2.38.1.4.3
Enumeration
.1.3.6.1.4.1.25506.2.38.1.4.3.1
.1.3.6.1.4.1.25506.2.38.1.4.3.2
.1.3.6.1.4.1.25506.2.38.1.4.4
.1.3.6.1.4.1.25506.2.38.1.5
Enumeration
.1.3.6.1.4.1.25506.2.38.1.5.1
secondsInteger32
.1.3.6.1.4.1.25506.2.38.1.5.2
.1.3.6.1.4.1.25506.2.38.1.5.3
.1.3.6.1.4.1.25506.2.38.1.5.3.1
.1.3.6.1.4.1.25506.2.38.1.5.4
.1.3.6.1.4.1.25506.2.38.1.6
.1.3.6.1.4.1.25506.2.38.1.6.1
secondsInteger32
.1.3.6.1.4.1.25506.2.38.1.6.1.1
Enumeration
.1.3.6.1.4.1.25506.2.38.1.6.1.2
Enumeration
.1.3.6.1.4.1.25506.2.38.1.6.1.3
.1.3.6.1.4.1.25506.2.38.1.6.2
.1.3.6.1.4.1.25506.2.38.1.6.3
.1.3.6.1.4.1.25506.2.38.1.6.3.0
.1.3.6.1.4.1.25506.2.38.1.7
.1.3.6.1.4.1.25506.2.38.1.7.1
.1.3.6.1.4.1.25506.2.38.1.7.1.1
Integer32
.1.3.6.1.4.1.25506.2.38.1.7.1.1.1
.1.3.6.1.4.1.25506.2.38.1.7.1.1.2
Integer32
.1.3.6.1.4.1.25506.2.38.1.7.1.1.3
.1.3.6.1.4.1.25506.2.38.1.7.1.1.4
.1.3.6.1.4.1.25506.2.38.1.7.1.1.5
.1.3.6.1.4.1.25506.2.38.1.8
.1.3.6.1.4.1.25506.2.38.1.8.1
.1.3.6.1.4.1.25506.2.38.1.8.1.1
Integer32
.1.3.6.1.4.1.25506.2.38.1.8.1.1.1
OctetString
.1.3.6.1.4.1.25506.2.38.1.8.1.1.2
OctetString
.1.3.6.1.4.1.25506.2.38.1.8.1.1.3
Enumeration
.1.3.6.1.4.1.25506.2.38.1.8.1.1.4
Enumeration
.1.3.6.1.4.1.25506.2.38.1.8.1.1.5
.1.3.6.1.4.1.25506.2.38.1.9
.1.3.6.1.4.1.25506.2.38.1.9.0
Dependencies (10) 6 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (12)
NameOIDDescription
.1.3.6.1.4.1.25506.2.38.1.1.4.1
Send this trap when the MAC table is filled. The
interval between two traps generated should be longer
than hh3cMacTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.1.4.2
Send this trap when the MAC table is almost full. The
interval between two traps generated should be longer
than hh3cMacTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.2.4.1
Send this trap when the ARP table is filled. The
interval between two traps generated should be longer
than hh3cArpTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.2.4.2
Send this trap when the dynamic ARP number of the
port exceeds the limitation. The object hh3cArpTabLen
describes the limitation of the max dynamic ARP number
of this port. The interval between two traps should be
longer than hh3cArpTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.2.5.0.3
Send this trap when the ARP table is filled for
recovery. The interval between two traps generated
should be longer than hh3cArpTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.3.5.1
Send this trap when the routing table is filled. The
interval between two traps generated should be longer
than hh3cRtTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.3.5.2
Send this trap when the detail routing table is filled. The
interval between two traps generated should be longer than
hh3cRtTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.3.5.3
Send this trap when the default route is deleted.
.1.3.6.1.4.1.25506.2.38.1.4.4.1
Send this trap when the multicast table is filled. The
interval between two traps generated should be longer
than hh3cMulticastTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.5.4.1
Send this trap when the ND table is filled. The
interval between two traps generated should be longer
than hh3cNdTabTrapInterval.
.1.3.6.1.4.1.25506.2.38.1.6.3.0.1
If no trap occurs during the interval spicified by
hh3cPeriodicalTrapInterval, an hh3cPeriodicalTrap
will be generated. If the interval is set to 0, no
hh3cPeriodicalTrap will be generated.
.1.3.6.1.4.1.25506.2.38.1.9.0.1
The notification is generated when the SNMP process restarts or
the HA smoothing of the active/standby switchover is complete.