HH3C-RCR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
31
.1.3.6.1.4.1.25506.2.48.1.2 · 1 row entry · 4 columns
This table contains state information of each MR
which is controlled by RCR.
hh3cRcrMRStateEntry entry .1.3.6.1.4.1.25506.2.48.1.2.1
Entry items
Indexes
hh3cRcrMRName
Column Syntax OID
hh3cRcrMRName
The name of MR which is controlled by RCR.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.25506.2.48.1.2.1.1
hh3cRcrMRState
The state of MR where identified on the controller
router-device(CR).
down: The MR has been enabled but has not connected
to the CR with TCP connection.
up: The MR has already successfully connected to
the CR …
Enumeration
Enumerated Values:
1down
2up
3controlled
.1.3.6.1.4.1.25506.2.48.1.2.1.2
hh3cRcrMRAuthType
The authentication type of communication packet between CR and MR.
Enumerationr/w
Enumerated Values:
1simple
2md5
.1.3.6.1.4.1.25506.2.48.1.2.1.3
hh3cRcrMRAuthPwd
The authentication password of communication packet between CR
and MR.
Reading this object always results in an OCTET STRING of length zero;
authentication may not be bypassed by reading the MIB object.
OctetStringr/w .1.3.6.1.4.1.25506.2.48.1.2.1.4
.1.3.6.1.4.1.25506.2.48.1.3 · 1 row entry · 5 columns
This table contains the external interface states of each MR
which is controlled by RCR.
hh3cRcrMROutIfStateEntry entry .1.3.6.1.4.1.25506.2.48.1.3.1
Entry items
Indexes
hh3cRcrMRName hh3cRcrMROutIfName
Column Syntax OID
hh3cRcrMROutIfName
The name of external interface on each MR.
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.25506.2.48.1.3.1.1
hh3cRcrMROutIfState
The state of external interface on each MR.
Enumeration
Enumerated Values:
1down
2up
3notExist
.1.3.6.1.4.1.25506.2.48.1.3.1.2
hh3cRcrMROutIfMaxUsedBandRate
The max spendable bandwidth rate on external interface.
%Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.25506.2.48.1.3.1.3
hh3cRcrMROutIfMinUsedBandRate
The min spendable bandwidth rate on external interface.
%Integer32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.25506.2.48.1.3.1.4
hh3cRcrMROutIfUsedBandRate
The used bandwidth rate on external interface.
%Integer32
Constraints:
range: 0-100
.1.3.6.1.4.1.25506.2.48.1.3.1.5
.1.3.6.1.4.1.25506.2.48.2.2 · 1 row entry · 7 columns
This table contains objects to get statistic information
of interfaces on a device.
hh3cRcrCRRcrPolicyEntry entry .1.3.6.1.4.1.25506.2.48.2.2.1
Entry items
Indexes
hh3cRcrCRRcrPlyID
Column Syntax OID
hh3cRcrCRRcrPlyID
The ID of RCR policy which the user has configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.48.2.2.1.1
hh3cRcrCRRcrPlyMatchIPListName
The matched IP prefix list name of RCR policy which the user has
configured.
OctetStringr/w
Constraints:
range: 1-19
.1.3.6.1.4.1.25506.2.48.2.2.1.2
hh3cRcrCRRcrPlyMatchStudyEnable
Whether the RCR policy which the user has configured is matched
for studying prefix mode.
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.25506.2.48.2.2.1.3
hh3cRcrCRRcrPlyMatchOperPlyName
The matched operation policy name of RCR policy which the user
has configured.
OctetStringr/w
Constraints:
range: 1-19
.1.3.6.1.4.1.25506.2.48.2.2.1.4
hh3cRcrCRRcrAclNumber
The matched acl number of RCR operation policy which the user
has configured.
Integer32r/w
Constraints:
range: 3000-3999
.1.3.6.1.4.1.25506.2.48.2.2.1.5
hh3cRcrCRRcrPlyDelayTime
The absolute maximum delay time. The range of values that can be
configured is from 1 to 10000.
millisecondInteger32r/w
Constraints:
range: 1-10000
.1.3.6.1.4.1.25506.2.48.2.2.1.6
hh3cRcrCRRcrPlyLossRate
The packet loss percent of prefix which the CR concerns.
%Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.25506.2.48.2.2.1.7
.1.3.6.1.4.1.25506.2.48.2.3 · 1 row entry · 6 columns
This table contains the matched prefix performance
information.
hh3cRcrCRMatPrefixPerfEntry entry .1.3.6.1.4.1.25506.2.48.2.3.1
Entry items
Indexes
hh3cRcrCRMatPrefPerfAddrType hh3cRcrCRMatPrefPerfDestIPAddr hh3cRcrCRMatPrefPerfDestMaskLen
Column Syntax OID
hh3cRcrCRMatPrefPerfAddrType
The destination IP addresses type of matched prefix which the CR
wants (IPv4 or IPv6).
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.48.2.3.1.1
hh3cRcrCRMatPrefPerfDestIPAddr
The destination IP address of matched prefix which the CR wants.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.48.2.3.1.2
hh3cRcrCRMatPrefPerfDestMaskLen
The destination IP address mask length of matched prefix which
the CR wants.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.25506.2.48.2.3.1.3
hh3cRcrCRMatPrefPerfDelayTime
The absolute maximum delay time of prefix which the CR has
configured.
secondInteger32
Constraints:
range: 1-10000
.1.3.6.1.4.1.25506.2.48.2.3.1.4
hh3cRcrCRMatPrefPerfLossRate
The packet loss percent of prefix which the CR has configured.
%Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.25506.2.48.2.3.1.5
hh3cRcrCRMatPrefPerfThroughput
The bandwidth of prefix which the CR has monitored.
kbSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.48.2.3.1.6
.1.3.6.1.4.1.25506.2.48.2.4 · 1 row entry · 9 columns
This table contains objects to get adjusted prefix information
which the CR controlled.
hh3cRcrCRAdjustPrefixEntry entry .1.3.6.1.4.1.25506.2.48.2.4.1
Entry items
Indexes
hh3cRcrCRAdjuPrefDestAddrType hh3cRcrCRAdjuPrefDestAddr hh3cRcrCRAdjuPrefMaskLen hh3cRcrCRAdjuPrefPreMRName hh3cRcrCRAdjuPrefPreOutIfName
Column Syntax OID
hh3cRcrCRAdjuPrefDestAddrType
The IP address type of the adjusted prefix which CR controlled
(IPv4 or IPv6).
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.48.2.4.1.1
hh3cRcrCRAdjuPrefDestAddr
The IP address of the adjusted prefix which CR controlled.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.48.2.4.1.2
hh3cRcrCRAdjuPrefMaskLen
The IP address mask length of the adjusted prefix which CR
controlled.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.25506.2.48.2.4.1.3
hh3cRcrCRAdjuPrefPreMRName
The name of the MR which the previous outbound traffic
flows through.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.25506.2.48.2.4.1.4
hh3cRcrCRAdjuPrefPreOutIfName
The name of the external interface on the MR which the previous
outbound traffic flows through.
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.25506.2.48.2.4.1.5
hh3cRcrCRAdjuPrefCurMRName
The name of the MR which the current outbound traffic flows through.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.25506.2.48.2.4.1.6
hh3cRcrCRAdjuPrefCurOutIfName
The name of the external interface on the MR which the current outbound
traffic flows through.
OctetString .1.3.6.1.4.1.25506.2.48.2.4.1.7
hh3cRcrCRAdjuPrefPersistTime
The persisting time from the time which the adjusted outbound
traffic has been adjusted by CR to now.
secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.48.2.4.1.8
hh3cRcrCRAdjuPrefAgeTime
The time which the adjusted prefix remains.
secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.48.2.4.1.9