HH3C-PROT-PRIORITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
4

hh3cProtocolPriorityTable

table
.1.3.6.1.4.1.25506.2.37.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cProtocolPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PROT-PRIORITY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PROT-PRIORITY-MIB::hh3cProtocolPriorityTable' 
A table is used to configure the priority of the protocol.
hh3cProtocolPriorityEntry row .1.3.6.1.4.1.25506.2.37.1.1.1.1
An entry containing information about the priority of the protocol.
Indexes
Column Syntax OID
hh3cPPriProtocolType
Protocol type.
Enumeration
Enumerated Values:
1ospf
2telnet
3snmp
4icmp
5bgp
6ldp
 .1.3.6.1.4.1.25506.2.37.1.1.1.1.1
hh3cPPriPriorityType
Priority type.
Enumerationr/w
Enumerated Values:
1ipPrecedence
2dscp
 .1.3.6.1.4.1.25506.2.37.1.1.1.1.2
hh3cPPriPriorityVlaue
Priority value.
If setting hh3cPPriPriorityType to ip-precedence(1),
the range of hh3cPPriPriorityVlaue is from 0 to 7.
If setting hh3cPPriPriorityType to dscp(2),
the range of hh3cPPriPriorityVlaue is from 0 to 63.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.25506.2.37.1.1.1.1.3
hh3cPPriRowStatus
RowStatus, Now support createAndGo,active and destroy.
To create a new row, hh3cPPriPriorityType and hh3cPPriPriorityValue must be specified.
To modify a row,hh3cPPriPriorityType and hh3cPPriPriorityValue
must change at…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.37.1.1.1.1.4