The private MIB file includes the test information of the
device. It is supplementary for rfc2925.txt.
|
hh3cNqa1.3.6.1.4.1.25506.8.3 |
| pingCtlDescr, pingCtlTargetAddressType, pingCtlTargetAddress, pingCtlType, pingCtlTestName, pingCtlOwnerIndex, pingCtlEntry | DISMAN-PING-MIB |
| hh3cRhw | HH3C-OID-MIB |
| InetAddress, InetAddressType | INET-ADDRESS-MIB |
| SnmpAdminString | SNMP-FRAMEWORK-MIB |
| OBJECT-TYPE, Gauge32, Counter32, Integer32, NOTIFICATION-TYPE, OBJECT-IDENTITY, Unsigned32, MODULE-IDENTITY | SNMPv2-SMI |
| TEXTUAL-CONVENTION, RowStatus, DisplayString, DateAndTime | SNMPv2-TC |
| Name | Base Type | Values/Constraints |
|---|---|---|
| public(1), vpn(2) |
![]() | .1.3.6.1.4.1.25506.8.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.10.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.15 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.16 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.17 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.18 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.19 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.20 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.21 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.22 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.23 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.24 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.25 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.26 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.27 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.28 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.29 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.30 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.31 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.32 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.11.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.15 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.16 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.17 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.18 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.19 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.20 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.21 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.22 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.23 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.24 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.25 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.26 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.27 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.28 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.29 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.30 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.31 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.32 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.33 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.34 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.12.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.13.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.14.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.15.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.16.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.15 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.16 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.2.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.15 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.16 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.17 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.18 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.19 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.20 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.3.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.11 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.12 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.13 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.14 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.15 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.16 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.17 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.18 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.19 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.20 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.21 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.22 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.23 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.24 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.25 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.26 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.27 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.28 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.29 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.30 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.31 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.32 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.33 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.4.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.6.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.6.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.6.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.6.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.7.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.7.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.7.1.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.7.1.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.1.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.10 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.2 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.5 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.6 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.7 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.8 | |
![]() | .1.3.6.1.4.1.25506.8.3.2.9 | |
![]() | .1.3.6.1.4.1.25506.8.3.3 | |
![]() | .1.3.6.1.4.1.25506.8.3.4 | |
![]() | .1.3.6.1.4.1.25506.8.3.4.0 | |
![]() | .1.3.6.1.4.1.25506.8.3.4.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.4.1.1 | |
![]() | .1.3.6.1.4.1.25506.8.3.4.1.2 |
| Name | OID | Description |
|---|---|---|
| .1.3.6.1.4.1.25506.8.3.3.1 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. Probe time(equals to RTT for some type of tests) is not in
the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdAccumNum.
3. The probe time is consecutively in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdConsecNum.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.10 | It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'overThreshold', 'invalid' or 'overUpperThreshold'.
The change may occur when the monitored condition exceeds the
threshold (or upper threshold) or When NQA operation is stopped.
The above threshold situations are specified as below.
1. Probe time is not in the range hh3cNqaReactThresholdLowerLimit
through hh3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdAccumNum.
3. The probe time is consecutively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdConsecNum.
4. When NQA operation is stopped.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.11 | It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'belowThreshold' or 'belowLowerThreshold' from a
threshold-crossing state.
The below threshold situations are specified as below.
1. Probe time is in the range hh3cNqaReactThresholdLowerLimit
through hh3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdAccumNum.
3. The probe time is consecutively in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdConsecNum.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.12 | It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'overThreshold', 'invalid' or 'overUpperThreshold'.
The change may occur when the monitored condition exceeds the
threshold (or upper threshold) or When NQA operation is stopped.
The threshold-crossing situations are specified as below.
1. When the number of accumulative failed probes reaches the specified
value in hh3cNqaReactThresholdAccumNum in one test while the value
of hh3cNqaReactThresholdType is 'accumulative'.
2. When the number of consecutive failed probes reaches the specified
value in hh3cNqaReactThresholdConsecNum in one test while the value
of hh3cNqaReactThresholdType is 'consecutive'.
3. When NQA operation is stopped.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.13 | It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'belowThreshold' or 'belowLowerThreshold' from a
threshold-crossing state.
The below threshold situations are specified as below.
1. When the number of accumulative successful probes reaches the specified
value in hh3cNqaReactThresholdAccumNum in one test while the value
of hh3cNqaReactThresholdType is 'accumulative'.
2. When the number of consecutive successful probes reaches the specified
value in hh3cNqaReactThresholdConsecNum in one test while the value
of hh3cNqaReactThresholdType is 'consecutive'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.14 | The SD means the delay values from source to destination.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of SD in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' and pingCtlType of the test is hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.15 | The DS means the delay values from destination to source.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of DS in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' and pingCtlType of the test is hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.16 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold.
The over threshold situations is specified as below.
1. When the test consecutively failed for a number of times specified
in hh3cNqaReactThresholdConsecNum while the value of
hh3cNqaReactThresholdType is 'consecutive'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly'. | |
| .1.3.6.1.4.1.25506.8.3.3.17 | It is generated when the test result changed. This notification is valid only when hh3cNqaReactActionType is 'trapOnly'and pingCtlType of the test is pingIcmpEcho. | |
| .1.3.6.1.4.1.25506.8.3.3.2 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average NQA round-trip-time (RTT) of jitter packets
is not in the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
2. The RTT of jitter packets is accumulatively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times specified
in hh3cNqaReactThresholdAccumNum in one test.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter or hh3cNqaTwampLight. | |
| .1.3.6.1.4.1.25506.8.3.3.3 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the probe test accumulatively failed for a
number of times specified in hh3cNqaReactThresholdAccumNum in one
test while the value of hh3cNqaReactThresholdType is 'accumulative'.
2. When the probe test consecutively failed for
a number of times specified in hh3cNqaReactThresholdConsecNum in one
test while the value of hh3cNqaReactThresholdType is 'consecutive'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.4 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the jitter packets accumulatively lost for a
number of times specified in hh3cNqaReactThresholdAccumNum in one
test while the value of hh3cNqaReactThresholdType is 'accumulative'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter or hh3cNqaTwampLight. | |
| .1.3.6.1.4.1.25506.8.3.3.5 | The SD means the jitter values from source to destination.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of SD in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit and the
hh3cNqaReactThresholdType is specified as 'average' type.
2. The average of SD in one jitter test is accumulatively
not in the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times specified
in hh3cNqaReactThresholdAccumNum and the
hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.6 | The DS means the jitter values from destination to source.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of DS in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit and the
hh3cNqaReactThresholdType is specified as 'average' type.
2. The average of DS in one jitter test is accumulatively not
in the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times specified
in hh3cNqaReactThresholdAccumNum and the
hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter. | |
| .1.3.6.1.4.1.25506.8.3.3.7 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the ICPIF value in one jitter test is not in
the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'. | |
| .1.3.6.1.4.1.25506.8.3.3.8 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the MOS value in one jitter test is not in
the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'. | |
| .1.3.6.1.4.1.25506.8.3.3.9 | It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is above threshold
or below threshold.
1. The average jitter value is not in the range of
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit and the
hh3cNqaReactThresholdType is specified as 'average' type.
2. The total number of times that the average jitter value is not
in the range of hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit reaches or exceeds
the value specified in hh3cNqaReactThresholdAccumNum and the
hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter or hh3cNqaTwampLight. | |
| .1.3.6.1.4.1.25506.8.3.4.0.1 | It is generated upon failure to start the scheduled NQA operation. | |
| .1.3.6.1.4.1.25506.8.3.4.0.2 | It is generated upon failure to enable the NQA server. |