HH3C-LswVLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
65

hh3cdot1qVlanMIBTable

table
.1.3.6.1.4.1.25506.8.35.2.1.1 · 1 row entry · 29 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cdot1qVlanMIBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cdot1qVlanMIBTable' 
VLAN MIB table
hh3cdot1qVlanMIBEntry row .1.3.6.1.4.1.25506.8.35.2.1.1.1
Entries of VLAN MIB table
Indexes
Column Syntax OID
hh3cdot1qVlanIndex
The VLAN-ID.
Hh3cVlanIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.1
hh3cdot1qVlanName
Name of the VLAN.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.2
hh3cdot1qVlanPorts
Port list of the VLAN.
HH3C-LswINF-MIBPortListr/w .1.3.6.1.4.1.25506.8.35.2.1.1.1.3
hh3cdot1qVlanType
Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3).
Enumerationr/w
Enumerated Values:
1superVlan
2common-vlan
3sub-vlan
4isolate-user-vlan
5secondary-vlan
6primaryVlan
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.4
hh3cdot1qVlanMacFilter
Whether to filter MAC addresses.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.5
hh3cdot1qVlanMcastUnknownProtos
Whether to broadcast the unknown packets.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.6
hh3cExistInterface
Whether there is virtual interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.7
hh3cVlanInterfaceIndex
Whether vlan interface is configured on vlan. If vlan interface is
configured, the value of the node is vlan id, else the value is 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.8
hh3cdot1qVlanMacLearn
MAC address learning identity. (common vlan/Sub-vlan)
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.9
hh3cdot1qVlanStatus
Status of the VLAN.
Enumeration
Enumerated Values:
1other
2static
3dynamic
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.10
hh3cdot1qVlanCreationTime
The sysUPTime when the VLAN is created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.11
hh3cdot1qVlanPriority
Priority of the VLAN.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.12
hh3cdot1qVlanRowStatus
Operation status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.13
hh3cdot1qVlanBroadcastSuppression
Whether broadcast suppression of vlan be supported pro rata.
The vlaue of 100 indicates no broadcast suppression. If the
function is not supported, this object cannot be written,
and 100 will be returned when reading
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.14
hh3cdot1qVlanBcastSuppressionPPS
If the broadcast can be controlled with pps(packet per second)type,
the value of 0 indicates no suppression. This node is conflicted
with hh3cdot1qVlanBroadcastSuppression. If the mode is set,
hh3cdot1qVlanBroadcastSupp…
Integer32r/w
Constraints:
range: 0-148800
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.15
hh3cdot1qVlanMulticast
Multicast vlan. The default value is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.16
hh3cdot1qVlanTaggedPorts
Tagged port list of the VLAN.
HH3C-LswINF-MIBPortList .1.3.6.1.4.1.25506.8.35.2.1.1.1.17
hh3cdot1qVlanUntaggedPorts
Untagged port list of the VLAN.
HH3C-LswINF-MIBPortList .1.3.6.1.4.1.25506.8.35.2.1.1.1.18
hh3cdot1qVlanPortIndexs
PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.
OctetStringr/w .1.3.6.1.4.1.25506.8.35.2.1.1.1.19
hh3cdot1qVlanStatisticStatus
VLAN traffic statistics switch.
The default value is false, which means the switch is off.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.20
hh3cdot1qVlanStatisticClear
Clear statistics for the specified VLANs. Operation read is not supported.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.21
hh3cdot1qVlanStatisticInTotalPkts
The total number of inbound packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.22
hh3cdot1qVlanStatisticInTotalBytes
The total number of inbound bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.23
hh3cdot1qVlanStatisticInPPS
The number of inbound packets per second.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.24
hh3cdot1qVlanStatisticInBPS
The number of inbound bytes per second.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.25
hh3cdot1qVlanStatisticOutTotalPkts
The total number of outbound packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.26
hh3cdot1qVlanStatisticOutTotalBytes
The total number of outbound bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.27
hh3cdot1qVlanStatisticOutPPS
The number of outbound packets per second.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.28
hh3cdot1qVlanStatisticOutBPS
The number of outbound bytes per second.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.8.35.2.1.1.1.29

hh3cVlanInterfaceTable

table
.1.3.6.1.4.1.25506.8.35.2.1.2 · 1 row entry · 9 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cVlanInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cVlanInterfaceTable' 
Virtual interface configuration table
hh3cVlanInterfaceEntry row .1.3.6.1.4.1.25506.8.35.2.1.2.1
Entries of virtual interface configuration table
Indexes
Column Syntax OID
hh3cVlanInterfaceID
Index of the vlan interface table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.1
hh3cdot1qVlanID
VLAN-ID
Hh3cVlanIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.2
hh3cdot1qVlanIpAddress
IP address of interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.3
hh3cdot1qVlanIpAddressMask
IP address mask of interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.4
hh3cVlanInterfaceAdminStatus
Status of VLAN virtual interfaces.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.5
hh3cVlanInterfaceFrameType
Frame type accepted by VLAN virtual interfaces.
Enumeration
Enumerated Values:
1ethernet-ii
2ethernet-snap
3ethernet-8022
4ethernet-8023
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.6
hh3cInterfaceRowStatus
Operation status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.7
hh3cVlanInterfaceIpMethod
Vlan interface ip address acquiring method which is manual, dhcp or bootp.
Enumerationr/w
Enumerated Values:
1assigned-ip
2dhcp-ip
3bootp-ip
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.8
hh3cVlanInterfaceIfIndex
IfIndex of VLAN interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.2.1.9

hh3cifIsolateMappingTable

table
.1.3.6.1.4.1.25506.8.35.2.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cifIsolateMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cifIsolateMappingTable' 
Secondary vlan lists of Isolate-VLANs.
hh3cifIsolateMappingEntry row .1.3.6.1.4.1.25506.8.35.2.1.4.1
Secondary vlan lists of Isolate-VLANs.
Indexes
Column Syntax OID
hh3cifIsolatePrimaryVlanID
Primary VLAN-ID.
Hh3cVlanIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.4.1.1
hh3cifIsolateSecondaryVlanlistLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.35.2.1.4.1.2
hh3cifIsolateSecondaryVlanlistHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.35.2.1.4.1.3

hh3cVlanInterfaceAddrTable

table
.1.3.6.1.4.1.25506.8.35.2.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cVlanInterfaceAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cVlanInterfaceAddrTable' 
VLAN interface IP address configuration table
hh3cVlanInterfaceAddrEntry row .1.3.6.1.4.1.25506.8.35.2.1.5.1
Entries of VLAN interface IP address configuration table
Indexes
Column Syntax OID
hh3cVlanInterfaceIpIfIndex
Index of VLAN interfaces.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.5.1.1
hh3cVlanInterfaceIpAddr
IP address of VLAN interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.8.35.2.1.5.1.2
hh3cVlanInterfaceIpMask
IP address mask of VLAN interface. When destory single IP address,
you must set it correct to relative IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.8.35.2.1.5.1.3
hh3cVlanInterfaceIpType
IP address type.
Enumerationr/w
Enumerated Values:
1primary
2sub
3cluster
4vrrp
 .1.3.6.1.4.1.25506.8.35.2.1.5.1.4
hh3cVlanInterfaceIpRowStatus
Operation status. active(1) will only be set when taking GET or
GET NEXT operation. createAndGo(4) and destory(6) is valid when
taking SET operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.35.2.1.5.1.5

hh3cDot1qVlanBatchMIBTable

table
.1.3.6.1.4.1.25506.8.35.2.1.6 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDot1qVlanBatchMIBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cDot1qVlanBatchMIBTable' 
VLAN batch configuration table.
In the case of VLAN batch creation, hh3cdot1qVlanBatchSetOperate should
be set to 1.
For example, if creating a row is for creating VLANs 2 to 4, the value
of the objects should be set as follows:
hh3cdot1qVlanBatchStartIndex 2,
hh3cdot1qVlanBatchEndIndex 4,
hh3cdot1qVlanBatchSetOperate create(1),
hh3cdot1qVlanBatchRowStatus createAndGo(4).
          
In the case of VLAN batch deletion, hh3cdot1qVlanBatchSetOperate should
be set to 2.
For example, if creating a row is for deleting VLANs 10 to 20, the value
of the objects should be set as follows:
hh3cdot1qVlanBatchStartIndex 10,
hh3cdot1qVlanBatchEndIndex 20,
hh3cdot1qVlanBatchSetOperate delete(2),
hh3cdot1qVlanBatchRowStatus createAndGo(4).
          
When the action of batch VLANs deleting or creating is done, one row
will be existent until it is deleted manually or ages out, but the VLANs
of it won't disappear with the deletion of the row.
hh3cDot1qVlanBatchMIBEntry row .1.3.6.1.4.1.25506.8.35.2.1.6.1
VLAN batch configuration entry.
Indexes
Column Syntax OID
hh3cdot1qVlanBatchOperIndex
The consequence of operation.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.6.1.1
hh3cdot1qVlanBatchStartIndex
The value of start VLAN-ID.
Hh3cVlanIndexr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.6.1.2
hh3cdot1qVlanBatchEndIndex
The value of end VLAN-ID.
Hh3cVlanIndexr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.6.1.3
hh3cdot1qVlanBatchOperStatus
The status of operation.
Enumeration
Enumerated Values:
1opInprogress
2opfailure
3opsuccess
4opsuccesspartial
 .1.3.6.1.4.1.25506.8.35.2.1.6.1.4
hh3cdot1qVlanBatchRowStatus
The row status of Hh3cDot1qVlanBatchMIBEntry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.35.2.1.6.1.5
hh3cdot1qVlanBatchSetOperate
VLAN batch creation or deletion.
Enumerationr/w
Enumerated Values:
1create
2delete
 .1.3.6.1.4.1.25506.8.35.2.1.6.1.6

hh3cifSuperVlanMappingTable

table
.1.3.6.1.4.1.25506.8.35.2.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cifSuperVlanMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cifSuperVlanMappingTable' 
Sub VLAN lists of super-VLANs.
hh3cifSuperVlanMappingEntry row .1.3.6.1.4.1.25506.8.35.2.1.7.1
Sub VLAN lists of super-VLANs.
Indexes
Column Syntax OID
hh3cifSuperVlanID
Super VLAN ID.
Hh3cVlanIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.7.1.1
hh3cifSubVlanlistLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.35.2.1.7.1.2
hh3cifSubVlanlistHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.35.2.1.7.1.3

hh3cPrivateVlanMappingTable

table
.1.3.6.1.4.1.25506.8.35.2.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPrivateVlanMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cPrivateVlanMappingTable' 
Secondary vlan lists of Primary-VLANs.
hh3cPrivateVlanMappingEntry row .1.3.6.1.4.1.25506.8.35.2.1.8.1
Secondary vlan lists of Primary-VLANs.
Indexes
Column Syntax OID
hh3cPrimaryVlanID
Primary VLAN-ID.
Hh3cVlanIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.25506.8.35.2.1.8.1.1
hh3cSecondaryVlanlistLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.35.2.1.8.1.2
hh3cSecondaryVlanlistHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bi…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.35.2.1.8.1.3

hh3cvLANMibSwitchCountTable

table
.1.3.6.1.4.1.25506.8.35.2.2.15 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cvLANMibSwitchCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cvLANMibSwitchCountTable' 
A table containing the information various statistics of switch.
hh3cvLANMibSwitchCountEntry row .1.3.6.1.4.1.25506.8.35.2.2.15.1
A table containing the information various statistics of switch.
Indexes
No indexes recorded
Column Syntax OID
hh3cVLANMibSwitchGMRPRXPkt
Number of GMRP frames received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.35.2.2.15.1.1
hh3cVLANMibSwitchGVRPRXPkt
Number of GVRP frames received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.35.2.2.15.1.2
hh3cVLANMibSwitchGMRPTXPkt
Number of GMRP frames transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.35.2.2.15.1.3
hh3cVLANMibSwitchGVRPTXPkt
Number of GVRP frames transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.35.2.2.15.1.4
hh3cVLANMibSwitchDiscardedPkt
Number of discarded frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.35.2.2.15.1.5
hh3cVLANMibSwitchGarpStatClear
Clear various Statistics viz. read operation not supported.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.25506.8.35.2.2.15.1.6

hh3cvLANMibHoldTimeTable

table
.1.3.6.1.4.1.25506.8.35.2.2.16 · 1 row entry · 1 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cvLANMibHoldTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LswVLAN-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LswVLAN-MIB::hh3cvLANMibHoldTimeTable' 
A table for setting/getting the Hold Time for a particular port.
hh3cvLANMibHoldTimeEntry row .1.3.6.1.4.1.25506.8.35.2.2.16.1
A table for setting/getting the HoldTime of the port.
Indexes
No indexes recorded
Column Syntax OID
hh3cVLANMibHoldTime
HoldTime of the port.
Integer32r/w
Constraints:
range: 10-32765
 .1.3.6.1.4.1.25506.8.35.2.2.16.1.1