HH3C-L4RDT-MIB Table View

This table contains an entry for each Web Cache
device that this unit is aware of.

hh3cL4RedirectCacheEntry row .1.3.6.1.4.1.25506.2.10.1.1

Each row specifies a known Web Cache device.

Indexes

hh3cL4RedirectCacheIpAddress

Column	Syntax	OID
hh3cL4RedirectCacheIpAddress This object specifies the IP address of the Web Cache device.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.10.1.1.1
hh3cL4RedirectCacheRedirectionStatus This object returns the current state of traffic redirection to the cache. If redirection is disabled, this object shall return disabledNotRedirecting(1). If a unit cannot be selected to pe…	Enumeration Enumerated Values: 1 disabledNotRedirecting 2 enabledNoHealthChecker 3 enabledHealthChecking 4 enabledHealthCheckOKNotRedirecting 5 enabledHealthCheckFailed 6 enabledRedirecting	.1.3.6.1.4.1.25506.2.10.1.1.2
hh3cL4RedirectCachePort This object stores the ifIndex that identifies the port or link aggregation which provides the connection that leads to the cache. If only manual cache configuration is supported, this value must be supplied. The metho…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.10.1.1.3
hh3cL4RedirectCacheRowStatus This object is used to create and remove Web Cache entries. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent ro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.10.1.1.4
hh3cL4RedirectCacheMacAddress This object defines the MAC address of the attached Web cache device. If only manual configuration of the cache is supported, this value must be supplied. The method of cache configuration can be ascertained by the pre…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.10.1.1.5
hh3cL4RedirectCacheVlan This object specifies the VLAN which the cache port belongs to.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.10.1.1.6
hh3cL4RedirectCacheTcpPort This object specifies the TCP port number that is being redirected	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.10.1.1.7

This table lists the IP addresses and subnetworks
that Web Cache redirection is not supported for.
          
Some devices may not support addition to this table.

hh3cL4RedirectIpExclusionEntry row .1.3.6.1.4.1.25506.2.10.2.1

Each row contains an IP address or a IP subnetwork
that is being excluded from the redirection.

Indexes

hh3cL4RedirectIpExclusionIpAddress

Column	Syntax	OID
hh3cL4RedirectIpExclusionIpAddress This object specifies the IP address or the subnetwork address that is to be excluded.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.10.2.1.1
hh3cL4RedirectIpExclusionMaskLen This object provides the number of bits in the subnetwork mask. This mask shall be applied to the excludeIP address to determine the subnetwork that is to be excluded. A value of 32 implies that the excludeIP address r…	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.25506.2.10.2.1.2
hh3cL4RedirectIpExclusionRowStatus This object is used to add rows to the Exclusion Table. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row sh…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.10.2.1.3

This table contains a row for each VLAN of the packet
which need to be redirected to the Web cache.

hh3cL4RedirectVlanEntry row .1.3.6.1.4.1.25506.2.10.3.1

Each row specifies a VLAN of the packet which need to
be redirected to the Web cache.

Indexes

hh3cL4RedirectVlanID

Column	Syntax	OID
hh3cL4RedirectVlanID This object specifies the VLAN ID of the packet which need to be redirected to the Web cache.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.10.3.1.1
hh3cL4RedirectVlanRowStatus This object allows ports to be added and removed from the table. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existe…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.10.3.1.2