HH3C-HGMP-MIB Table View

Table of cluster member switches

hh3chgmpGrpMemberEntry row .1.3.6.1.4.1.25506.8.7.1.14.1

Indexes

hh3chgmpGrpMemberDeviceId

Column	Syntax	OID
hh3chgmpGrpMemberDeviceId 4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.1.14.1.1
hh3chgmpGrpMemberSerial When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.25506.8.7.1.14.1.2
hh3chgmpGrpMemberIpAddr The private IP addresses of the member switches for the communication inside the cluster.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.25506.8.7.1.14.1.3
hh3chgmpGrpMemberName Hostname of the member switch	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.25506.8.7.1.14.1.4
hh3chgmpGrpMemberPassword Member password for joining a cluster	OctetStringr/w	.1.3.6.1.4.1.25506.8.7.1.14.1.5
hh3chgmpGrpMemberPlatform Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.	OctetString	.1.3.6.1.4.1.25506.8.7.1.14.1.6
hh3chgmpGrpMemberStatus Member status on the administrator switch, use for displaying the network management status.	Enumeration Enumerated Values: 0 normal 1 fault	.1.3.6.1.4.1.25506.8.7.1.14.1.7
hh3chgmpGrpMemberDisconCount Count of inside communication disconnection between the member switch and the administrator switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.1.14.1.8
hh3chgmpGrpMemberEnrollTime Enrollment time of the member, measured in seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.1.14.1.9
hh3chgmpGrpMemberOperate Operation indication field, indicates the operation of adding/removing a member by the network management agent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.7.1.14.1.10

Reset a member switch in the cluster.

hh3chgmpMemberResetEntry row .1.3.6.1.4.1.25506.8.7.1.15.1

Indexes

hh3chgmpMemberResetMAC

Column	Syntax	OID
hh3chgmpMemberResetMAC The management MAC address of the switch to be reset, which is the unique identifier of the switch.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.25506.8.7.1.15.1.1
hh3chgmpMemberEraseflash Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.	Enumerationr/w Enumerated Values: 0 noErase 1 erase 65535 cannotget	.1.3.6.1.4.1.25506.8.7.1.15.1.2

Cluster switches white list table. White list topology is the
topology which has been affirmed by network administrator in a
cluster, and all devices in white list topology are recorded in this
table. Against to white list table, black list table records the
devices which are denied to join in cluster. Adding a black list
device to white list table will cause a failure.

hh3chgmpWhitelistEntry row .1.3.6.1.4.1.25506.8.7.1.23.1.1

Entry items

Indexes

hh3chgmpWhitelistDeviceId

Column	Syntax	OID
hh3chgmpWhitelistDeviceId Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the…	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.25506.8.7.1.23.1.1.1
hh3chgmpWhitelistSerial When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.	Integer32 Constraints: range: 65535-65535 range: 0-2047	.1.3.6.1.4.1.25506.8.7.1.23.1.1.2
hh3chgmpWhitelistRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.7.1.23.1.1.3

Cluster switches white list neighboring information table. White
list neighbor table records all neighbor devices for every white
list device. In fact, white list neighbor table displays the whole
white list topology.

hh3chgmpWhitelistNbEntry row .1.3.6.1.4.1.25506.8.7.1.23.2.1

Entry items

Indexes

hh3chgmpWhitelistDeviceId hh3chgmpWhitelistNbIndex

Column	Syntax	OID
hh3chgmpWhitelistNbIndex Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.8.7.1.23.2.1.1
hh3chgmpWhitelistNbDeviceId Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC i…	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.25506.8.7.1.23.2.1.2
hh3chgmpWhitelistPortName The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.	OctetString Constraints: range: 0-47	.1.3.6.1.4.1.25506.8.7.1.23.2.1.3
hh3chgmpWhitelistNbPortName The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.	OctetString Constraints: range: 0-47	.1.3.6.1.4.1.25506.8.7.1.23.2.1.4

Cluster switches black list table. The black list table records all
black list devices, and a device in black list is not permitted to
join in any cluster.

hh3chgmpBlacklistEntry row .1.3.6.1.4.1.25506.8.7.1.23.3.1

Entry items

Indexes

hh3chgmpBlacklistDeviceId

Column	Syntax	OID
hh3chgmpBlacklistDeviceId Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the…	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.25506.8.7.1.23.3.1.1
hh3chgmpBlacklistAccessDeviceId Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. …	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.25506.8.7.1.23.3.1.2
hh3chgmpBlacklistAccessPortName The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.	OctetString Constraints: range: 0-47	.1.3.6.1.4.1.25506.8.7.1.23.3.1.3
hh3chgmpBlacklistRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.8.7.1.23.3.1.4

This table contains port number for different network protocols
on each member switch. The port number can be used to access
a specified member switch with specified protocol and private
IP address.

hh3chgmpMemberPriPortEntry row .1.3.6.1.4.1.25506.8.7.1.24.1

Information about a specified member private port entry. The
indexes of the entry are hh3chgmpGrpMemberDevId and
hh3chgmpMemberPriPortProto, which indicate entries in the table.

Indexes

hh3chgmpMemberDevId hh3chgmpMemberPriPortProto

Column	Syntax	OID
hh3chgmpMemberDevId Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.1.24.1.1
hh3chgmpMemberPriPortProto The index of this table. Each instance value of this object corresponds to a different protocol.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.8.7.1.24.1.2
hh3chgmpMemberPriPortProtoDescr It describes the hh3chgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hh3chgmpMemberPriPortProtocol value is 1.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.25506.8.7.1.24.1.3
hh3chgmpMemberPriPortNum The private port number of member switch, used by specified hh3chgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The pr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.8.7.1.24.1.4

Stack member table.

hh3chgmpStackMemberEntry row .1.3.6.1.4.1.25506.8.7.2.6.1

Indexes

hh3chgmpStackMemberDeviceId

Column	Syntax	OID
hh3chgmpStackMemberDeviceId 2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.2.6.1.1
hh3chgmpStackMemberSerial When adding a member switch to the stack, the master switch will assign an unique integer to identify it.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.25506.8.7.2.6.1.2
hh3chgmpStackMemberIpAddr The private member IP address for the communication inside the stack.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.25506.8.7.2.6.1.3
hh3chgmpStackMemberName Hostname of the member switch.	OctetString	.1.3.6.1.4.1.25506.8.7.2.6.1.4
hh3chgmpStackMemberPassword Member password for joining a stack.	OctetString	.1.3.6.1.4.1.25506.8.7.2.6.1.5
hh3chgmpStackMemberPlatform Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.	OctetString	.1.3.6.1.4.1.25506.8.7.2.6.1.6
hh3chgmpStackMemberStatus Member status on the master switch, use for displaying the network management status.	Enumeration Enumerated Values: 0 normal 1 fault	.1.3.6.1.4.1.25506.8.7.2.6.1.7
hh3chgmpStackMemberDisconCount Count of inside communication disconnection between the member switch and the master switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.2.6.1.8
hh3chgmpStackMemberEnrollTime Enrollment time of the member, measured in seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.2.6.1.9

Enable/Disable the NTDP on the switch port.

hh3chgmpNTDPInterfaceEntry row .1.3.6.1.4.1.25506.8.7.4.9.1

Indexes

hh3chgmpNTDPInterfaceIfIndex

Column	Syntax	OID
hh3chgmpNTDPInterfaceIfIndex Unique identifier an interface of the device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.4.9.1.1
hh3chgmpNTDPInterfaceEnable If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.25506.8.7.4.9.1.2

Access the information about the switch from the topology table.

hh3chgmpNTDPCacheEntry row .1.3.6.1.4.1.25506.8.7.4.10.1

Indexes

hh3chgmpNTDPCacheHashIndex hh3chgmpNTDPCacheDeviceID

Column	Syntax	OID
hh3chgmpNTDPCacheHashIndex Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator s…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.25506.8.7.4.10.1.1
hh3chgmpNTDPCacheDeviceID 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.4.10.1.2
hh3chgmpNTDPCacheClusterName Name of the cluster including the device.	OctetString	.1.3.6.1.4.1.25506.8.7.4.10.1.3
hh3chgmpNTDPCacheClusterRole Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).	Enumeration Enumerated Values: 1 roleCOSW 2 roleMSW 3 roleBKSW 16 roleCASW 17 roleUNISW	.1.3.6.1.4.1.25506.8.7.4.10.1.4
hh3chgmpNTDPCacheCapabilities The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.4.10.1.5
hh3chgmpNTDPCacheVersion The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.4.10.1.6
hh3chgmpNTDPCachePlatform Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.4.10.1.7
hh3chgmpNTDPCacheMngVLAN The management VLAN ID of the device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.4.10.1.8
hh3chgmpNTDPCacheHop Hops to this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.4.10.1.9

Access the topology structure collected by the NTDP.

hh3chgmpNTDPTopEntry row .1.3.6.1.4.1.25506.8.7.4.11.1

Indexes

hh3chgmpNTDPTopHashIndex hh3chgmpNTDPTopEdgeStartDevID hh3chgmpNTDPTopEdgeIndex

Column	Syntax	OID
hh3chgmpNTDPTopHashIndex Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator s…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.25506.8.7.4.11.1.1
hh3chgmpNTDPTopEdgeStartDevID 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.4.11.1.2
hh3chgmpNTDPTopEdgeIndex Edge index of this entry in the data structure.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.25506.8.7.4.11.1.3
hh3chgmpNTDPTopEdgeEndDevID 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.4.11.1.4
hh3chgmpNTDPTopEdgeStartPort The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.	OctetString Constraints: range: 0-47	.1.3.6.1.4.1.25506.8.7.4.11.1.5
hh3chgmpNTDPTopEdgeStartPortFullDuplex The full-duplex status of the first port on a topology edge.	Enumeration Enumerated Values: 0 half 1 full	.1.3.6.1.4.1.25506.8.7.4.11.1.6
hh3chgmpNTDPTopEdgeStartPortSpeed The speed of the first port on a topology edge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.4.11.1.7
hh3chgmpNTDPTopEdgeEndPort The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.	OctetString Constraints: range: 0-47	.1.3.6.1.4.1.25506.8.7.4.11.1.8
hh3chgmpNTDPTopLinkStatus In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdg…	Enumeration Enumerated Values: 1 forwarding 2 blocking	.1.3.6.1.4.1.25506.8.7.4.11.1.11

Configure to enable/disable the interface NDP of the switch.

hh3cNDPPortEntry row .1.3.6.1.4.1.25506.8.7.5.5.1

Indexes

hh3cNDPIfIndex

Column	Syntax	OID
hh3cNDPIfIndex Unique identifier of an interface of the device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.8.7.5.5.1.1
hh3cNDPPortStatus If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.25506.8.7.5.5.1.2

NDP neighbor information on the switch.

hh3cNDPPortNbEntry row .1.3.6.1.4.1.25506.8.7.5.6.1

Indexes

hh3cNDPIfIndex hh3cNDPPortNbDeviceId hh3cNDPPortNbPortName

Column	Syntax	OID
hh3cNDPPortNbDeviceId 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.	OctetString Constraints: range: 0-10	.1.3.6.1.4.1.25506.8.7.5.6.1.1
hh3cNDPPortNbPortName Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.	OctetString Constraints: range: 0-47	.1.3.6.1.4.1.25506.8.7.5.6.1.2
hh3cNDPPortNbDeviceName Device name. A null string indicates that the field was not included in the latest NDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.5.6.1.3
hh3cNDPPortNbPortMode The neighbor port duplex mode.	Enumeration Enumerated Values: 1 full 2 half 3 auto	.1.3.6.1.4.1.25506.8.7.5.6.1.4
hh3cNDPPortNbProductVer Product version. A null string indicates that the field was not included in the latest NDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.5.6.1.5
hh3cNDPPortNbHardVer Hardware version. A null string indicates that the field was not included in the latest NDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.5.6.1.6
hh3cNDPPortNbBootromVer Bootrom version. A null string indicates that the field was not included in the latest NDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.5.6.1.7
hh3cNDPPortNbSoftVer Software version. A null string indicates that the field was not included in the latest NDP packet.	OctetString	.1.3.6.1.4.1.25506.8.7.5.6.1.8
hh3cNDPPortNbAgingtime How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.	Integer32 Constraints: range: 5-255	.1.3.6.1.4.1.25506.8.7.5.6.1.9