HH3C-FCOE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
9
Rows
9
Columns
44
hh3cFCoECfgTable
table.1.3.6.1.4.1.25506.2.120.1.1.1
·
1 row entry
·
5 columns
This table facilitates configuration of FCoE parameters on a per Fibre Channel management instance.
There is one entry in this table for each
Fibre Channel management instance.
Fibre Channel management instance.
Indexes
FC-MGMT-MIBfcmInstanceIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hh3cFCoECfgFcmap
This object configures the FC-MAP value used by the FCF
when operating in FPMA mode. The default value is 0EFC00h, as written in the standard. |
OctetStringr/w Constraints: range: 3-3 |
.1.3.6.1.4.1.25506.2.120.1.1.1.1.1 |
||||||
|
hh3cFCoECfgDynamicVfcCreation
This object is set to 'true' to enable, or 'false' to
disable, the dynamic creation of VFC interfaces on this FCF. When set to 'true', VFC interfaces are dynamically created as and when a FIP-based FLOGI or ELP request … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.1.1.2 |
||||||
|
hh3cFCoECfgDefaultFCFPriority
The FIP priority value advertised by the FCF to ENodes by
default. hh3cFCoEStaticVfcFCFPriority configured for a VFC interface overrides this setting for the ENode associated with the VFC. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.25506.2.120.1.1.1.1.3 |
||||||
|
hh3cFCoECfgDATov
The Discovery_Advertisement_Timeout value configured for
the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisements. |
secondsUnsigned32r/w Constraints: range: 4-600 |
.1.3.6.1.4.1.25506.2.120.1.1.1.1.4 |
||||||
|
hh3cFCoECfgAddressingMode
Addressing mode(s) supported by the FCF. Implementations
should fail SetRequests for unsupported modes. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.1.1.5 |
hh3cFCoEVLANTable
table.1.3.6.1.4.1.25506.2.120.1.1.2
·
1 row entry
·
4 columns
In fabrics in which VLANs are deployed, this table facilitates configuration of VLAN and Virtual Fabric associations in an FCoE network. In such fabrics, FCoE forwarding for a fabric is over a VLAN in a (Layer-2) Ethernet network. That is, reachability between the ENode/remote-FCF and an FCF for a given fabric is determined by the reachability provided by the Ethernet network on the corresponding VLAN. An active entry in this table indicates which VLAN is used to transport FCoE traffic for a particular Virtual Fabric. If VLANs are not deployed or not enabled, entries in this table are ignored by the bridge. Some implementations may allow traffic from only one Virtual Fabric to be transported over a given VLAN. Such implementations should prevent multiple entries with the same VLAN-ID from being created in this table. Modifying existing VLAN-Virtual Fabric associations is not possible. The specific row must first be deleted and then a new one created.
There is one entry in this table for each VLAN that is
designated to transport FCoE traffic for a given Virtual
Fabric.
designated to transport FCoE traffic for a given Virtual
Fabric.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cFCoEVLANIndex
This object identifies the VLAN-ID that the FCoE FCF function
is being enabled for. |
Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.25506.2.120.1.1.2.1.1 |
||||||||||||
|
hh3cFCoEFabricIndex
This object identifies the Fabric Index of the Virtual Fabric
traffic which is to be transported over the VLAN identified by hh3cFCoEVLANIndex. |
T11-TC-MIBT11FabricIndex Textual Convention: T11-TC-MIBT11FabricIndex Unsigned32Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.25506.2.120.1.1.2.1.2 |
||||||||||||
|
hh3cFCoEVLANOperState
Operational state of this VLAN-Virtual Fabric association
entry. The 'up' state is achieved when both the Virtual Fabric and VLAN are valid. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.2.1.3 |
||||||||||||
|
hh3cFCoEVLANRowStatus
The status of this conceptual row. The RowStatus becomes active
on successful creation of an entry. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.2.1.4 |
hh3cFCoEStaticVfcTable
table.1.3.6.1.4.1.25506.2.120.1.1.3
·
1 row entry
·
9 columns
This table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests, operators may want to associate certain pre-configured policy for a particular ENode or a remote-FCF. In such cases static VFC creation becomes necessary. In addition to being creating, a static VFC also needs to be associated to an ENode or remote-FCF. The VFC binding provides such an association. The binding does not need to be specified when the row for a VFC is created, but may be specified later.
There is one entry in this table for each statically created
VFC Interface.
VFC Interface.
Indexes
FC-MGMT-MIBfcmInstanceIndex hh3cFCoEStaticVfcIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cFCoEStaticVfcIndex
This index uniquely identifies a static VFC entry in this
table. |
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.1 |
||||||||||||
|
hh3cFCoEStaticVfcFCFPriority
If this VFC is for a VF_Port this object is used to configure
FCF priority to be advertised to the ENode associated with the VFC. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.2 |
||||||||||||
|
hh3cFCoEStaticVfcBindType
The mechanism to identify the ENode associated with this VFC
if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type VE_Port. |
Hh3cFCoEVfcBindTyper/w Textual Convention: Hh3cFCoEVfcBindType EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.3.1.3 |
||||||||||||
|
hh3cFCoEStaticVfcBindIfIndex
This object is applicable only when the local FCF is
directly connected to an ENode or remote-FCF over a specific Ethernet interface, in which case this object contains the ifIndex of said Ethernet interface. If the ENo… |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.4 |
||||||||||||
|
hh3cFCoEStaticVfcBindMACAddress
This object is applicable when the ENode or remote-FCF to
which the local FCF is connected is identified by a MAC address. A FIP frame from an ENode or remote-FCF is associated with this VFC only if the source MAC addr… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.5 |
||||||||||||
|
hh3cFCoEStaticVfcIfIndex
The ifIndex of this Virtual FC interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.6 |
||||||||||||
|
hh3cFCoEStaticVfcCreationTime
The timestamp of this entry's creation time.
|
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.7 |
||||||||||||
|
hh3cFCoEStaticVfcFailureCause
The cause of failure for the last bind operation. This
object will be zero length if and only if the bind is successful. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.25506.2.120.1.1.3.1.8 |
||||||||||||
|
hh3cFCoEStaticVfcRowStatus
The status of this conceptual row. The RowStatus becomes
active on successful creation of a VFC. The VFC does not need to be bound for the row to be active, but the VFC must be bound before becoming operational. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.3.1.9 |
hh3cFCoEFIPSnoopingTable
table.1.3.6.1.4.1.25506.2.120.1.1.4
·
1 row entry
·
3 columns
FCoE provides increased flexibility, but with this flexibility new challenges arise in assuring highly robust Fabrics. The FCF does not have the complete control that a Fibre Channel switch has. Ethernet bridges commonly provide a feature called Access Control Lists (ACLs). Properly configured ACLs may emulate a point-to-point link by providing the traffic enforcement previously discussed. Furthermore, the FIP protocol has been designed to enable Ethernet bridges to efficiently monitor FIP frames passing through them. This data facilitates the automatic configuration of these ACLs. In addition, the automatic configuration is possible independent of any other ACLs that may be in use in the network for other applications. And FIP Snooping is to maintain these ACLs.
There is one entry in this table for each VLAN that is
designated to ensure that only valid FCoE traffic is allowed.
designated to ensure that only valid FCoE traffic is allowed.
Indexes
FC-MGMT-MIBfcmInstanceIndex hh3cFCoEFIPSnoopingVLANIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hh3cFCoEFIPSnoopingVLANIndex
This object identifies the VLAN-ID that the FIP Snooping function
is being enabled for. |
Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.25506.2.120.1.1.4.1.1 |
||||
|
hh3cFCoEFIPSnoopingEnable
This object is used to enable or disable FIP Snooping on an
Ethernet Bridge. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.4.1.2 |
||||
|
hh3cFCoEFIPSnoopingFcmap
This object configures the FC-MAP value associated with the
FIP snooping Ethernet Bridge. |
OctetStringr/w Constraints: range: 3-3 |
.1.3.6.1.4.1.25506.2.120.1.1.4.1.3 |
hh3cFCoEVlanCfgTable
table.1.3.6.1.4.1.25506.2.120.1.1.5
·
1 row entry
·
4 columns
A table contains FCoE related configurations and information of VLANs. An entry in this table is created when the corresponding VLAN is created and FCoE is enabled for the VLAN, as well as deleted when the VLAN is deleted or FCoE is disabled for the VLAN. If the switch mode is not FCF-NPV mode, all the operations on any object in this table result in errors.
An entry used for managing the FCoE related configurations of a VLAN.
Indexes
hh3cFCoEVLANIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cFCoEVlanCfgFcmap
This object configures the FC-MAP value used by the FCF in a VLAN
when operating in FPMA mode. If this object is not configured, the default value is 0EFC00h. |
OctetStringr/w Constraints: range: 3-3 |
.1.3.6.1.4.1.25506.2.120.1.1.5.1.1 |
||||||||||||
|
hh3cFCoEVlanCfgFCFPriority
The FIP priority value advertised by the FCF in a VLAN to ENodes by
default. If this object is not configured, the default value is 128. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.25506.2.120.1.1.5.1.2 |
||||||||||||
|
hh3cFCoEVlanCfgDATov
The Discovery_Advertisement_Timeout value configured for
the FCF in a VLAN. This is used as the timeout value in seconds by the FCF in a VLAN to send periodic Discovery Advertisements. If this object is not configured, … |
secondsUnsigned32r/w Constraints: range: 4-600 |
.1.3.6.1.4.1.25506.2.120.1.1.5.1.3 |
||||||||||||
|
hh3cFCoEVlanCfgRowStatus
Now only three states are supported:
createAndGo, active, and destroy. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.5.1.4 |
.1.3.6.1.4.1.25506.2.120.1.1.6
·
1 row entry
·
6 columns
A table contains the remote FCF information on device.
Each entry contains information about a FCF for a VLAN.
Indexes
FC-MGMT-MIBfcmInstanceIndex hh3cFCoEFIPSnoopingFCFVLANIndex hh3cFCoEFIPSnoopingFCFIfIndex hh3cFCoEFIPSnoopingFCFMAC
| Column | Syntax | OID |
|---|---|---|
|
hh3cFCoEFIPSnoopingFCFVLANIndex
This object identifies the VLAN-ID whose FIP Snooping function
gets ready on the FCF. |
Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.25506.2.120.1.1.6.1.1 |
|
hh3cFCoEFIPSnoopingFCFIfIndex
This index uniquely identifies an Ethernet interface that connects
to the FCF. |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.6.1.2 |
|
hh3cFCoEFIPSnoopingFCFMAC
The MAC address of the Ethernet interface on the FCF directly
connected to the local device. |
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.25506.2.120.1.1.6.1.3 |
|
hh3cFCoEFIPSnoopingFCFSwitchName
The switch name of the FCF.
|
HH3C-FC-TC-MIBHh3cFcNameId Textual Convention: HH3C-FC-TC-MIBHh3cFcNameId OctetStringType Constraints: range: 8 |
.1.3.6.1.4.1.25506.2.120.1.1.6.1.4 |
|
hh3cFCoEFIPSnoopingFCFFabricName
The fabric name of the FCF.
|
HH3C-FC-TC-MIBHh3cFcNameId Textual Convention: HH3C-FC-TC-MIBHh3cFcNameId OctetStringType Constraints: range: 8 |
.1.3.6.1.4.1.25506.2.120.1.1.6.1.5 |
|
hh3cFCoEFIPSnoopingFCFENodeCount
The total number of ENodes that log in through this Ethernet port.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.25506.2.120.1.1.6.1.6 |
.1.3.6.1.4.1.25506.2.120.1.1.7
·
1 row entry
·
4 columns
A table contains the ENode information on the local device.
Each entry contains information about an ENode for a VLAN.
Indexes
FC-MGMT-MIBfcmInstanceIndex hh3cFCoEFIPSnoopingENodeVLANIndex hh3cFCoEFIPSnoopingENodeIfIndex hh3cFCoEFIPSnoopingENodeMAC
| Column | Syntax | OID |
|---|---|---|
|
hh3cFCoEFIPSnoopingENodeVLANIndex
This object identifies the VLAN-ID whose FIP Snooping function
gets ready on the ENode. |
Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.25506.2.120.1.1.7.1.1 |
|
hh3cFCoEFIPSnoopingENodeIfIndex
This index uniquely identifies an Ethernet interface that connects
to the ENode. |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.7.1.2 |
|
hh3cFCoEFIPSnoopingENodeMAC
The MAC address of the ENode.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.25506.2.120.1.1.7.1.3 |
|
hh3cFCoEFIPSnoopingENodeName
The node name of the ENode.
|
HH3C-FC-TC-MIBHh3cFcNameId Textual Convention: HH3C-FC-TC-MIBHh3cFcNameId OctetStringType Constraints: range: 8 |
.1.3.6.1.4.1.25506.2.120.1.1.7.1.4 |
.1.3.6.1.4.1.25506.2.120.1.1.8
·
1 row entry
·
7 columns
A table contains the virtual N_Port information on the local device.
Each entry contains information about a virtual N_Port.
Indexes
FC-MGMT-MIBfcmInstanceIndex hh3cFCoEFIPSnoopingVNVLANIndex hh3cFCoEFIPSnoopingVNENodeIfIndex hh3cFCoEFIPSnoopingVNENodeMAC hh3cFCoEFIPSnoopingVNFCFMAC hh3cFCoEFIPSnoopingVNMAC
| Column | Syntax | OID |
|---|---|---|
|
hh3cFCoEFIPSnoopingVNVLANIndex
This object identifies the VLAN-ID through which a virtual N_Port
logs in to the FCF. |
Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.1 |
|
hh3cFCoEFIPSnoopingVNENodeIfIndex
This index uniquely identifies an Ethernet interface that connects
to the ENode. |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.2 |
|
hh3cFCoEFIPSnoopingVNENodeMAC
The MAC address of the ENode.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.3 |
|
hh3cFCoEFIPSnoopingVNFCFMAC
The MAC address of the FCF.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.4 |
|
hh3cFCoEFIPSnoopingVNMAC
The MAC address of the virtual N_Port.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.5 |
|
hh3cFCoEFIPSnoopingVNName
The port name of the virtual N_Port.
|
HH3C-FC-TC-MIBHh3cFcNameId Textual Convention: HH3C-FC-TC-MIBHh3cFcNameId OctetStringType Constraints: range: 8 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.6 |
|
hh3cFCoEFIPSnoopingVNFCFIfIndex
This index uniquely identifies an Ethernet interface that connects
to the FCF. |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.8.1.7 |
.1.3.6.1.4.1.25506.2.120.1.1.9
·
1 row entry
·
2 columns
A table is used to configure FIP Snooping working mode of the Ethernet interface on the localdevice.
Each entry contains information about FIP Snooping working mode of the
Ethernet interface.
Ethernet interface.
Indexes
FC-MGMT-MIBfcmInstanceIndex hh3cFCoEFIPSnoopingIfCfgIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hh3cFCoEFIPSnoopingIfCfgIfIndex
This index uniquely identifies an Ethernet interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.25506.2.120.1.1.9.1.1 |
||||
|
hh3cFCoEFIPSnoopingIfCfgPortType
The FIP Snooping working mode of an Ethernet interface on the local
device. The FCF mode means that the Ethernet interface must connect to an FCF. The ENode mode means that the Ethernet interface must connect to an EN… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.25506.2.120.1.1.9.1.2 |