HH3C-EVI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
50

hh3cEviIfExtendVlanTable

table
.1.3.6.1.4.1.25506.2.132.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviIfExtendVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviIfExtendVlanTable' 
A table that contains extended VLAN entries.  A site
extends extended VLANs to remote sites over an EVI tunnel.
hh3cEviIfExtendVlanEntry row .1.3.6.1.4.1.25506.2.132.1.2.1.1
Detailed information about each extended VLAN.
Indexes
Column Syntax OID
hh3cEviIfExtendVlanIndex
Each VLAN index specifies a VLAN ID in the range of
1 to 4094.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.25506.2.132.1.2.1.1.1
hh3cEviIfExtendVlanLAV
Local Active VLANs (LAVs), which are active VLANs on the EVI tunnel
interface. The interface can extend only active VLANs to
remote sites.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.2.1.1.2
hh3cEviIfExtendVlanRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.132.1.2.1.1.3

hh3cEviIfVlanMappingTable

table
.1.3.6.1.4.1.25506.2.132.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviIfVlanMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviIfVlanMappingTable' 
VLAN mapping table on the interface.
hh3cEviIfVlanMappingEntry row .1.3.6.1.4.1.25506.2.132.1.2.2.1
Detailed information about each VLAN mapping.
Indexes
Column Syntax OID
hh3cEviIfVlanMappingSiteId
Site ID of the interface on which the VLAN mapping is
configured. If '0' is specified, the operation applies
to all sites.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.132.1.2.2.1.1
hh3cEviIfVlanMappingSrc
Local VLAN ID in the mapping.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.25506.2.132.1.2.2.1.2
hh3cEviIfVlanMappingDst
Remote VLAN ID in the mapping.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.25506.2.132.1.2.2.1.3
hh3cEviIfVlanMappingRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.132.1.2.2.1.4

hh3cEviIfAttributeTable

table
.1.3.6.1.4.1.25506.2.132.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviIfAttributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviIfAttributeTable' 
A table that contains EVI tunnel attribute entries.
hh3cEviIfAttributeEntry row .1.3.6.1.4.1.25506.2.132.1.2.3.1
Detailed information about the attributes of each EVI tunnel.
Indexes
Column Syntax OID
hh3cEviIfFloodingMode
State of the EVI flooding function. The function is enabled
if the value is set to true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.2.3.1.1
hh3cEviIfARPSuppression
State of the ARP flooding suppression function. The
function is enabled if the value is set to true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.2.3.1.2

hh3cEviIfFloodingMacTable

table
.1.3.6.1.4.1.25506.2.132.1.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviIfFloodingMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviIfFloodingMacTable' 
A table that contains MAC addresses configured
for selective flooding.
hh3cEviIfFloodingMacEntry row .1.3.6.1.4.1.25506.2.132.1.2.4.1
Detailed information about each MAC address
used for EVI selective flooding.
Indexes
Column Syntax OID
hh3cEviIfFloodingMacAddress
MAC address used for EVI selective flooding.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.132.1.2.4.1.1
hh3cEviIfFloodMacVlanIndex
The VLAN that contains the MAC address.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.25506.2.132.1.2.4.1.2
hh3cEviIfFloodingMacRowStatus
State of the MAC address entry. You can use this
object to create or delete entries. Deleting entries
does not delete this object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.132.1.2.4.1.3

hh3cEviMacCountTable

table
.1.3.6.1.4.1.25506.2.132.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviMacCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviMacCountTable' 
EVI MAC statistics table.  The table contains MAC entry
counts sorted by MAC address types, including local MACs, local
MAC conflicts, remote MACs, and remote MAC conflicts.
hh3cEviMacCountEntry row .1.3.6.1.4.1.25506.2.132.1.3.1.1
EVI MAC entry counts.
Indexes
Column Syntax OID
hh3cEviMacLocalMacs
Number of local MACs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.3.1.1.1
hh3cEviMacLocalConflicts
Number of local MACs that conflict with remote
MACs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.3.1.1.2
hh3cEviMacRemoteMacs
Number of remote MACs received from remote edge devices.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.3.1.1.3
hh3cEviMacRemoteConflicts
Number of remote MACs that conflict with local MACs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.3.1.1.4

hh3cEviMacLocalTable

table
.1.3.6.1.4.1.25506.2.132.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviMacLocalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviMacLocalTable' 
MAC address table that only contains MAC addresses at
the site.
hh3cEviMacLocalEntry row .1.3.6.1.4.1.25506.2.132.1.3.2.1
Detailed informaiton about each local MAC entry.
Indexes
Column Syntax OID
hh3cEviMacLocalVlan
VLANs that contain the local MACs.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.25506.2.132.1.3.2.1.1
hh3cEviMacLocalMacAddr
Local MAC addresses.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.132.1.3.2.1.2
hh3cEviMacLocalMacType
MAC address types, including: dynamic MACs, static MACs,
and flood MACs (MACs configured for selective flooding).
Hh3cEviMacType
Type Values:
1other
2dynamic
3static
4flood
 .1.3.6.1.4.1.25506.2.132.1.3.2.1.3
hh3cEviMacLocalConflict
Whether the MAC conflicts with any remote MAC.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.3.2.1.4
hh3cEviMacLocalFiltered
Whether the MAC is filtered.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.3.2.1.5

hh3cEviMacRemoteTable

table
.1.3.6.1.4.1.25506.2.132.1.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviMacRemoteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviMacRemoteTable' 
A table contains MAC addresses received from remote edge devices.
hh3cEviMacRemoteEntry row .1.3.6.1.4.1.25506.2.132.1.3.3.1
Detailed information about each remote MAC.
Indexes
Column Syntax OID
hh3cEviMacRemoteVlan
VLANs that contain remote MAC addresses.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.25506.2.132.1.3.3.1.1
hh3cEviMacRemoteMacAddr
Remote MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.132.1.3.3.1.2
hh3cEviMacRemoteMacEffect
Whether the MAC can be used for forwarding traffic.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.3.3.1.3
hh3cEviMacRemoteConflict
The remote MAC conflicts with a local MAC.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.3.3.1.4

hh3cEviProcessPolicyTable

table
.1.3.6.1.4.1.25506.2.132.1.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviProcessPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviProcessPolicyTable' 
A table that contains routing policy information for each
EVI IS-IS process.
hh3cEviProcessPolicyEntry row .1.3.6.1.4.1.25506.2.132.1.4.1.1
Detailed information about the routing policy for each
EVI IS-IS process.
Indexes
Column Syntax OID
hh3cEviProcessId
EVI IS-IS process ID.
Unsigned32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.25506.2.132.1.4.1.1.1
hh3cEviProcessPolicy
Routing policy for the EVI IS-IS process.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25506.2.132.1.4.1.1.2

hh3cEviProcessGrTable

table
.1.3.6.1.4.1.25506.2.132.1.4.2 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviProcessGrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviProcessGrTable' 
A table that contains graceful restart (GR) information.
hh3cEviProcessGrEntry row .1.3.6.1.4.1.25506.2.132.1.4.2.1
Detailed GR information for each EVI IS-IS process.
Indexes
Column Syntax OID
hh3cEviProcessGrEnable
Whether the GR function is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.4.2.1.1
hh3cEviProcessGrInterval
EVI IS-IS GR interval in the range of 30 to 1800, in
seconds.
Unsigned32r/w
Constraints:
range: 30-1800
 .1.3.6.1.4.1.25506.2.132.1.4.2.1.2

hh3cEviProcessVSysTable

table
.1.3.6.1.4.1.25506.2.132.1.4.3 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviProcessVSysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviProcessVSysTable' 
A table that contains virtual system entries.  Virtual systems are
associated with EVI IS-IS processes.
hh3cEviProcessVSysEntry row .1.3.6.1.4.1.25506.2.132.1.4.3.1
Detailed information about each vitual system.
Indexes
Column Syntax OID
hh3cEviVirtualSysId
Virtual system ID in hexadecimal notation. The virtual
system ID must be unique in the EVI network.
ISIS-MIBIsisSystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.132.1.4.3.1.1
hh3cEviVirtualSysRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.132.1.4.3.1.2

hh3cEviISISNbrSummaryTable

table
.1.3.6.1.4.1.25506.2.132.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviISISNbrSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviISISNbrSummaryTable' 
EVI neighbor statistics table.
hh3cEviISISNbrSummaryEntry row .1.3.6.1.4.1.25506.2.132.1.5.1.1
EVI neighbor statistics table entries. The entries
contain the EVI neighbor summary for each EVI IS-IS
process.
Indexes
Column Syntax OID
hh3cEviISISNbrMaxMultiHomes
The maximum number of edge devices that the site
can contain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.5.1.1.1
hh3cEviISISNbrSiteNbrs
The count of neighbors that belong to the same site.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.5.1.1.2
hh3cEviISISNbrLinkNbrs
The count of neighbors that are in remote sites.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.132.1.5.1.1.3

hh3cEviISISNbrTable

table
.1.3.6.1.4.1.25506.2.132.1.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviISISNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviISISNbrTable' 
A table that contains generic information about all
neighbors.
hh3cEviISISNbrEntry row .1.3.6.1.4.1.25506.2.132.1.5.2.1
Detailed information about each neighbor of the edge
device.
Indexes
Column Syntax OID
hh3cEviISISNbrSysId
System ID of the neighbor.
ISIS-MIBIsisSystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.132.1.5.2.1.1
hh3cEviISISNbrMacAddr
MAC address of the neighbor.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.132.1.5.2.1.2
hh3cEviISISNbrSiteId
Site ID of the neighbor.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.132.1.5.2.1.3
hh3cEviISISNbrTransStatus
State of EVI transport-facing links.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.5.2.1.4

hh3cEviEnableTable

table
.1.3.6.1.4.1.25506.2.132.1.6.1 · 1 row entry · 1 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviEnableTable' 
A table that contains all EVI-enabled neighboring ports of the edge device.
hh3cEviEnableEntry row .1.3.6.1.4.1.25506.2.132.1.6.1.1
Detailed information about each EVI-enabled port in the EVI
network.
Indexes
Column Syntax OID
hh3cEviEnableStatus
End station service disable (trunk port) bit. When this bit
is set (true), all native frames received on the port and all
native frames that would have been sent on the port are
discarded.

The value of t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.6.1.1.1

hh3cEviNbrBaseTable

table
.1.3.6.1.4.1.25506.2.132.1.7.1 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviNbrBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviNbrBaseTable' 
A table that contains basic information about the EVI
Neighbor Discovery Protocol (ENDP).
hh3cEviNbrBaseEntry row .1.3.6.1.4.1.25506.2.132.1.7.1.1
Detailed information about ENDP for each EVI tunnel.
Indexes
Column Syntax OID
hh3cEviNbrSelfServerStatus
If the value is set to true, the EVI neighbor
discovery server (ENDS) is enabled. When you
enable ENDS on an EVI tunnel interface, an
EVI neighbor discovery client (ENDC) on the EVI tunnel
interface is also enabled aut…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.132.1.7.1.1.1
hh3cEviNbrAuthPassword
ENDP authentication key. It is a zero-length string when being read.
OctetStringr/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.25506.2.132.1.7.1.1.2
hh3cEviNbrClientRegisterInterval
Interval at which the ENDCs on an EVI tunnel interface
update their registration with their ENDSs.
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.25506.2.132.1.7.1.1.3

hh3cEviNbrRemoteServerTable

table
.1.3.6.1.4.1.25506.2.132.1.7.2 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviNbrRemoteServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviNbrRemoteServerTable' 
A table that contains basic information about the
remote ENDSs.
hh3cEviNbrRemoteServerEntry row .1.3.6.1.4.1.25506.2.132.1.7.2.1
Detailed information about each remote ENDS. When you set
the address of a remote ENDS on an EVI tunnel interface,
an ENDC is enabled automatically on the EVI tunnel interface.
Indexes
Column Syntax OID
hh3cEviNbrRemoteServerType
Address type of the remote ENDS, including ipv4 and ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.132.1.7.2.1.1
hh3cEviNbrRemoteServer
Address of the remote ENDS. The address type is
specified by the hh3cEviNbrRemoteServerType object.
Address length (4 or 16 bytes) must be consistent with
the address type.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.132.1.7.2.1.2
hh3cEviNbrRemoteServerRowStatus
Entry status. This object is used to create or delete
entries. Deleting entries does not delete this object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.132.1.7.2.1.3

hh3cEviNbrTable

table
.1.3.6.1.4.1.25506.2.132.1.7.3 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cEviNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EVI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EVI-MIB::hh3cEviNbrTable' 
A table that contains basic information about neighbors
discovered with ENDP.
hh3cEviNbrEntry row .1.3.6.1.4.1.25506.2.132.1.7.3.1
Detailed information about each EVI neighbor.
Indexes
Column Syntax OID
hh3cEviNbrAddressType
Address type of the neighbor, including ipv4 and ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.132.1.7.3.1.1
hh3cEviNbrAddress
Address of the neighbor. The address type is specified by the
hh3cEviNbrAddressType object. Address length (4 or 16 bytes)
must be consistent with the address type.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.132.1.7.3.1.2
hh3cEviNbrSystemID
System ID of the neighbor.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.132.1.7.3.1.3
hh3cEviNbrExpireTime
Expiration time of the neighbor.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.132.1.7.3.1.4
hh3cEviNbrStatus
State of the neighbor.
Hh3cEviNeighborStatus
Type Values:
1up
2down
 .1.3.6.1.4.1.25506.2.132.1.7.3.1.5