HH3C-EPON-UNI-MIB Table View

Column Syntax OID

hh3cEponUniIndex

The index value which uniquely identifies the FE(fast Ethernet)
interface of the ONU.

hh3cEponUniVLANTrunkAllowListLow

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.1

hh3cEponUniDescr

A textual string containing information about the interface. This
string should include the name of the manufacturer, the product name
and the version of the interface hardware and software.

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.1.1.2

hh3cEponUniAdminStatus

The desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down(2)
state. The testing(3)state indicates that no operational packets
can be passed. As a res…

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.25506.2.42.5.1.1.1.3

hh3cEponUniMdi

Type of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing).

Enumerationr/w

Enumerated Values:

1	mdi-ii
2	mdi-x
3	mdi-auto

.1.3.6.1.4.1.25506.2.42.5.1.1.1.4

hh3cEponUniPriority

The priority of user network interface. If the value is larger,
the priority will be higher.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.25506.2.42.5.1.1.1.5

hh3cEponUniVlanType

UNI vlan types.

Enumerationr/w

Enumerated Values:

1	vlantrunk
2	access
3	hybrid
4	untagged
5	transparent
6	doubletagged
7	tag
8	translation
9	aggregation

.1.3.6.1.4.1.25506.2.42.5.1.1.1.6

hh3cEponUniAccessVlan

The vlan ID assigned to untagged frames or Priority-Tagged
frames received on user network interface.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.25506.2.42.5.1.1.1.7

hh3cEponUniTrunkPvid

PVID(port vlan ID), the vlan ID assigned to untagged frames or
Priority-Tagged frames received on user network interface.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.25506.2.42.5.1.1.1.8

Each octet within this value specifies a set of eight VLANs,
with the first octet specifying VLANs 1 through 8, the second
octet specifying VLANs 9 through 16, etc. Within each octet,
the most significant bit represent…

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.1.1.9

hh3cEponUniVLANTrunkAllowListHigh

Each octet within this value specifies a set of eight VLANs,
with the first octet specifying VLANs 2049 through 2056, the
second octet specifying VLANs 2057 through 2064, etc. Within
each octet, the most significant bit…

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.1.1.10

hh3cEponUniInboundLineRate

The value of the inbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
hh3cEponUniLineRateMax in the entry. It must be multiple
of the value of hh3cEponUniLineRateStep. The default va…

hh3cEponUniOutboundLineRate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.11

The value of the outbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
hh3cEponUniLineRateMax in the entry. It must be multiple
of the value of hh3cEponUniLineRateStep. The default v…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.12

hh3cEponUniFlowControl

Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.1.1.13

hh3cEponUniSpeed

User network interface speed.

Enumerationr/w

Enumerated Values:

0	auto
10	s10M
100	s100M
1000	s1000M
10000	s10000M
24000	s24000M

.1.3.6.1.4.1.25506.2.42.5.1.1.1.14

hh3cEponUniDuplex

User network interface mode.

Enumerationr/w

Enumerated Values:

1	full
2	half
3	auto

.1.3.6.1.4.1.25506.2.42.5.1.1.1.15

hh3cEponUniVlanVPNStatus

vlan VPN status.
true(1) - vlan VPN status enable.
false(2) - vlan VPN disable.

hh3cEponUniVlanConfiguration

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.1.1.16

hh3cEponUniCountReset

Reset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object.

Enumerationr/w

Enumerated Values:

reset

.1.3.6.1.4.1.25506.2.42.5.1.1.1.17

hh3cEponUniPortIsolate

enable - enable UNI port isolate setting.
disable - disable UNI port isolate setting.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.42.5.1.1.1.18

The vlan configuration of the related vlan mode.
Transparent vlan mode: hh3cEponUniVlanConfiguration is a
zero length string.
Tag vlan mode: the first four octets were the tag
assigned to untagged frames received on UNI…

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.42.5.1.1.1.23

hh3cEponUniAutoNegotiation

enable - enable auto negotiation.
disable - disable auto negotiation.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.42.5.1.1.1.25

hh3cEponUniRestartAutoNeg

Force to restart the auto negotiation process.

Enumerationr/w

Enumerated Values:

1	autoNegotiation

.1.3.6.1.4.1.25506.2.42.5.1.1.1.26

hh3cEponUniLinkStatus

The link status of UNI.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.25506.2.42.5.1.1.1.29

hh3cEponUniInterfaceType

UNI interface type.

Enumeration

Enumerated Values:

1	gigabitethernetport
2	fastethernetport
3	voipport
4	e1port

.1.3.6.1.4.1.25506.2.42.5.1.1.1.30

hh3cEponUniVitualCableTest

True(1): Virtual cable test enable.
False(2): Virtual cable test disable.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.42.5.1.1.1.31

hh3cEponUniVCTCableStatus

Get the cable status.
Normal(1),cable is normal.
Abnormal(2),cable is abnormal.
AbnormalOpen(3),cable is abnormal because of open circuit.
AbnormalShort(4),cable is abnormal because of short circuit.
Failure(5),cable is…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	abnormalOpen
4	abnormalShort
5	failure

.1.3.6.1.4.1.25506.2.42.5.1.1.1.32

hh3cEponUniVCTCableLength

Get the cable length.
When hh3cEponUniVCTCableStatus is normal,
the node stands for the length from the UNI port to the port opposite.
When hh3cEponUniVCTCableStatus is abnormal,
it stands for the length from the UNI po…

hh3cEponUniVCTImpedanceMismatch

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.33

Get the cable impedance.
Not-support(1),the UNI port does not support this function.
True(2),impedance match.
False(3),impedance mismatch.

Enumeration

Enumerated Values:

1	not-support
2	true
3	false

.1.3.6.1.4.1.25506.2.42.5.1.1.1.34

hh3cEponUniVCTPairSkew

Get the symmetry of cable.
If the function is not supported,
the default value 0 will be returned.
Unit:nanosecond(ns).

hh3cEponUniVCTPolaritySwap

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.35

hh3cEponUniVCTPairSwap

NotSupport(1),the UNI port does not support this function.
True(2),pair swap.
False(3),not pair swap.

Enumeration

Enumerated Values:

1	notSupport
2	true
3	false

.1.3.6.1.4.1.25506.2.42.5.1.1.1.36

NotSupport(1),the UNI port does not support this function.
True(2),polarity swap.
False(3),not polarity swap.

Enumeration

Enumerated Values:

1	notSupport
2	true
3	false

.1.3.6.1.4.1.25506.2.42.5.1.1.1.37

hh3cEponUniVCTInsertionLoss

If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.38

hh3cEponUniVCTReturnLoss

If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db).

hh3cEponUniVCTNearendCrosstalk

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.39

If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.40

hh3cEponUniVlan

If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.41

hh3cEponUniMacMax

The maximum number of MAC addresses that the UNI port can learn.
no-limit(65535)
others(0~65534)

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.1.1.42

hh3cEponUniCountTable

table

.1.3.6.1.4.1.25506.2.42.5.1.2 · 1 row entry · 20 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniCountTable'

A list of interface counter about frames entries.

hh3cEponUniCountEntry row .1.3.6.1.4.1.25506.2.42.5.1.2.1

An entry containing management information applicable
to a particular interface.

Indexes

IF-MIBifIndex hh3cEponUniIndex hh3cEponUniMacIndex

Column	Syntax	OID
hh3cEponUniInStatsPkts The total number of frames (including bad frames, broadcast frames, and multicast frames) received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.1`
hh3cEponUniInStatsUnicastPkts The total number of good frames received that are directed to the unicast address. Note that this does not include multicast and broadcast frames.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.2`
hh3cEponUniInStatsBroadcastPkts The total number of good frames received that are directed to the broadcast address. Note that this does not include multicast frames.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.3`
hh3cEponUniInStatsMulticastPkts The total number of good frames received that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.4`
hh3cEponUniInPausePkts A count of MAC Control frames received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter ca…	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.5`
hh3cEponUniInTotalErrors Total count of the error frames received on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.6`
hh3cEponUniInStatsCRCAlignErrors The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number …	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.7`
hh3cEponUniInStatsUndersizePkts The total number of frames received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.8`
hh3cEponUniInStatsOversizePkts The total number of frames received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.9`
hh3cEponUniInErrorbyOther The total number of error frames received on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.10`
hh3cEponUniOutStatsPkts The total number of frames (including bad frames, broadcast frames, and multicast frames) sent.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.11`
hh3cEponUniOutStatsUnicastPkts The total number of good frames sent that are directed to the unicast address. Note that this does not include multicast and broadcast frames.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.12`
hh3cEponUniOutStatsBroadcastPkts The total number of good frames sent that are directed to the broadcast address. Note that this does not include multicast frames.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.13`
hh3cEponUniOutStatsMulticastPkts The total number of good frames sent that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.14`
hh3cEponUniOutStatsPausePkts The total number of MAC control frames sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur …	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.15`
hh3cEponUniOutTotalErrors The total number of error frames sent on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.16`
hh3cEponUniOutStatsCollisions The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standar…	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.17`
hh3cEponUniOutDelayExceededDiscards The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.18`
hh3cEponUniOutErrorbyOther The total number of other error frames sent on this interface. Other error frames means the error frames out of collision frames and excessive delayed frames.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.19`
hh3cEponUniOutDroppedFrames The total number of frames dropped because of buffer failure.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.42.5.1.2.1.20`

hh3cEponUniIgmpInfoTable

table

.1.3.6.1.4.1.25506.2.42.5.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniIgmpInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniIgmpInfoTable'

This table stores igmp information of UNI interface.

hh3cEponUniIgmpInfoEntry row .1.3.6.1.4.1.25506.2.42.5.1.3.1

The entry of hh3cEponUniIgmpInfoTable.

Indexes

Column	Syntax	OID
hh3cEponUniMacIndex The index uniquely identifies the igmp information in current UNI interface.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.42.5.1.3.1.1`
hh3cEponUniIgmpMacAddress A 6-octet read-only value carrying the individual MAC address indicates which igmp group the UNI interface belonging to.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.25506.2.42.5.1.3.1.2`
hh3cEponUniIgmpVlanId An integer range from 1 to 4094 indicates the vlan which the igmp Mac address has joined in.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.25506.2.42.5.1.3.1.3`

hh3cEponUniPortPolicyTable

table

.1.3.6.1.4.1.25506.2.42.5.1.6 · 1 row entry · 9 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniPortPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniPortPolicyTable'

UNI port policy configuration.

hh3cEponUniPortPolicyEntry row .1.3.6.1.4.1.25506.2.42.5.1.6.1

The entry of hh3cEponUniPortPolicyTable.

Indexes

hh3cEponUniPortPolicyStatus

Column Syntax OID

enable - enable UNI upstream port policing.
disable - disable UNI upstream port policing.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.42.5.1.6.1.1

hh3cEponUniPortPolicyCir

The committed information rate,
ranging from 1 to 102400, measured in kbps.

hh3cEponUniPortPolicyBucketDepth

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.2

The depth of the token bucket to tolerant the certain burst(CBS),
ranging from 0 to 65535, measured in bytes.

hh3cEponUniPortPolicyExtraBurst

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.3

The extra token to permit the forwarding engine to finish the packet
being sent when the bucket depth is exhausted, ranging from 0 to 65535,
measured in bytes.

hh3cEponUniPortPolicyInboundCir

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.4

The inbound committed information rate, measured in kbps.

hh3cEponUniPortPolicyInboundBucketDepth

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.5

The inbound depth of the token bucket to tolerant the certain burst(CBS),
ranging from 0 to 65535, measured in bytes.

hh3cEponUniPortPolicyInboundExtraBurst

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.6

The inbound extra token to permit the forwarding engine to finish the packet
being sent when the bucket depth is exhausted, ranging from 0 to 65535,
measured in bytes.

hh3cEponUniPortPolicyOutboundCir

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.7

The outbound committed information rate, stepped by 64, measured in kbps.

hh3cEponUniPortPolicyOutboundPir

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.8

The outbound peak information rate, stepped by 64, measured in kbps.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.6.1.9

hh3cEponUniMulticastTable

table

.1.3.6.1.4.1.25506.2.42.5.1.7 · 1 row entry · 4 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniMulticastTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniMulticastTable'

UNI multicast configuration.

hh3cEponUniMulticastEntry row .1.3.6.1.4.1.25506.2.42.5.1.7.1

The entry of hh3cEponUniPortPolicyTable.

Indexes

hh3cEponUniMulticastGroupNumber

Column Syntax OID

The allowed multicast group number that can be handled
at the same time by UNI.

hh3cEponUniMulticastVlanList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.7.1.1

The multicast vlan list.
The first two octets of the string represent the first VLAN ID;
the second two octets of the string represent the second VLAN ID,
and so on. It is a zero length string by default.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.42.5.1.7.1.2

hh3cEponUniMulticastStripStatus

true - strip the vlan tag of multicast packet.
false - does not strip the vlan tag of multicast packet.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.42.5.1.7.1.3

hh3cEponUniMulticastFastleave

true(1) - fast leave of IGMP enable on ONU.
false(2) - fast leave of IGMP disable on ONU.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.7.1.4

hh3cEponUniTechAbilityTable

table

.1.3.6.1.4.1.25506.2.42.5.1.8 · 1 row entry · 2 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniTechAbilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniTechAbilityTable'

UNI multicast configuration.

hh3cEponUniTechAbilityEntry row .1.3.6.1.4.1.25506.2.42.5.1.8.1

The entry of hh3cEponUniTechAbilityTable.

Indexes

IF-MIBifIndex hh3cEponUniIndex hh3cEponUniMulticastIndex

Column	Syntax	OID
hh3cEponUniLocalTechAbility The local port capabilities of the UNI. Each two octets stand for a capability of UNI: the first two octets represent one capability and the second two octets represent another capability, and so on. The capabilities li…	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25506.2.42.5.1.8.1.1`
hh3cEponUniAdvertisedTechAbility The advertised port capabilities of the UNI. The capabilities list references the description of hh3cEponUniLocalTechAbility.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.25506.2.42.5.1.8.1.2`

hh3cEponUniMulticastControlTable

table

.1.3.6.1.4.1.25506.2.42.5.1.9 · 1 row entry · 11 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniMulticastControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniMulticastControlTable'

UNI multicast control parameters.

hh3cEponUniMulticastControlEntry row .1.3.6.1.4.1.25506.2.42.5.1.9.1

The entry of the table hh3cEponUniMulticastControlTable.

Indexes

Column Syntax OID

hh3cEponUniMulticastVlanIndex

The multicast vlan ID.

hh3cEponUniMulticastAddressList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.1

The multicast address, each four octets represents a multicast address,
the address section ranging from the first four octets to the second
four octets, and the like.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.42.5.1.9.1.2

hh3cEponUniMulticastAccessRule

deny - deny the multicast packet.
permit - permit the multicast packet.
preview - permit the multicast packet with conditions.

Enumerationr/w

Enumerated Values:

1	deny
2	permit
3	preview

.1.3.6.1.4.1.25506.2.42.5.1.9.1.3

hh3cEponUniMulticastChannelLimit

The limitation of multicast preview channel number.

hh3cEponUniMulticastPreTimeSlice

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.4

The time slice of multicast preview.

hh3cEponUniMulticastPreTimes

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.5

The number of multicast preview times.

hh3cEponUniMulticastPreInterval

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.6

The interval between two consecutive previews, measured in minute.

hh3cEponUniMulticastRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.7

The status of this table entry. The active,
createAndGo and the destory statuses are supported.

hh3cEponUniMulticastIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.25506.2.42.5.1.9.1.8

The index of the entry.

hh3cEponUniMulticastSourceIpList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.9

This list contains many source ip addresses.
Each ip address is contained in four octets.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.42.5.1.9.1.10

hh3cEponUniMulticastResetInterval

The interval is measured in minute.
From the last preview limitation is reached, a customer can preview again
after this interval is expired.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.9.1.11

hh3cEponUniQosIndexNextTable

table

.1.3.6.1.4.1.25506.2.42.5.1.10 · 1 row entry · 1 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniQosIndexNextTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniQosIndexNextTable'

The next index table.

hh3cEponUniQosIndexNextEntry row .1.3.6.1.4.1.25506.2.42.5.1.10.1

The entry of the table hh3cEponUniQosIndexNextTable.

Indexes

IF-MIBifIndex hh3cEponUniIndex hh3cEponUniQosConfIndex

Column	Syntax	OID
hh3cEponUniQosConfIndexNext This object contains an appropriate value to be used for hh3cEponUniQosConfIndex when creating rows in the hh3cEponUniQosConfTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.42.5.1.10.1.1`

hh3cEponUniQosConfTable

table

.1.3.6.1.4.1.25506.2.42.5.1.11 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniQosConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniQosConfTable'

UNI Qos configuration.

hh3cEponUniQosConfEntry row .1.3.6.1.4.1.25506.2.42.5.1.11.1

The entry of the table hh3cEponUniQosConfTable.

Indexes

Column Syntax OID

hh3cEponUniQosConfIndex

The rule index.

hh3cEponUniQosConfRuleIndexNext

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.11.1.1

This object contains an appropriate value to be used for
hh3cEponUniQosRuleIndex when creating rows in the
hh3cEponUniQosRuleTable.

hh3cEponUniQosConfMappedQueue

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.11.1.2

The queue that the ethernet frames will be mapped.

hh3cEponUniQosConfMarkedPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.11.1.3

Priority of the ethernet frames to be marked, which
compliant with the 802.1D user priority standard.

hh3cEponUniQosConfRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.11.1.4

The status of this table entry. The active,
createAndGo and the destory statuses are supported.

IF-MIBifIndex hh3cEponUniIndex hh3cEponUniQosConfIndex hh3cEponUniQosRuleIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.25506.2.42.5.1.11.1.5

hh3cEponUniQosRuleTable

table

.1.3.6.1.4.1.25506.2.42.5.1.12 · 1 row entry · 6 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniQosRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniQosRuleTable'

Qos sub rule of the UNI.

hh3cEponUniQosRuleEntry row .1.3.6.1.4.1.25506.2.42.5.1.12.1

The entry of the table hh3cEponUniQosRuleTable.

Indexes

Column Syntax OID

hh3cEponUniQosRuleIndex

The sub rule index.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.25506.2.42.5.1.12.1.1

hh3cEponUniQosRuleSelector

The ethernet frame selector.
dstmac - based on destination MAC address.
srcmac - based on source MAC address.
ethernetpriority - based on ethernet priority.
vlanid - based on VLAN ID.
ethernettype - based on ethernet t…

Enumerationr/w

Enumerated Values:

1	dstmac
2	srcmac
3	ethernetpriority
4	vlanid
5	ethernettype
6	dstip
7	srcip
8	ipprototype
9	ipv4tosdscp
10	ipv6precedence
11	srcport
12	dstport

.1.3.6.1.4.1.25506.2.42.5.1.12.1.2

hh3cEponUniQosRuleValue

The rule value based on the hh3cEponUniQosRuleSelector.

hh3cEponUniQosRuleMacAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.12.1.3

MAC Address.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.25506.2.42.5.1.12.1.4

hh3cEponUniQosRuleOperator

nervermatch - value never match.
equal - field equal to the value.
notequal - field not equal to the value.
lessthanequal - field less than or equal to the value.
greaterthanequal - field greater than or equal to the va…

Enumerationr/w

Enumerated Values:

1	nevermatch
2	equal
3	notequal
4	lessthanequal
5	greaterthanequal
6	fieldexist
7	fieldnotexist
8	alwaysmatch

.1.3.6.1.4.1.25506.2.42.5.1.12.1.5

hh3cEponUniQosRuleRowStatus

The status of this table entry. Only active,
createAndGo and the destory are supported.

IF-MIBifIndex hh3cEponUniMirrorGroupID

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.25506.2.42.5.1.12.1.6

hh3cEponUniMirrorGroupTable

table

.1.3.6.1.4.1.25506.2.42.5.1.13 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniMirrorGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniMirrorGroupTable'

Qos sub rule of the UNI.

hh3cEponUniMirrorGroupEntry row .1.3.6.1.4.1.25506.2.42.5.1.13.1

The entry of the hh3cEponUniMirrorGroupTable.

Indexes

Column Syntax OID

hh3cEponUniMirrorGroupID

Epon UNI mirror group ID.

hh3cEponUniMirrorInboundPortList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.13.1.1

UNI inbound port list.
Each octet within this value specifies a set of eight ports,
with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each octet,
the most si…

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.13.1.2

hh3cEponUniMirrorOutboundPortList

UNI outbound port list. For more information, see hh3cEponUniMirrorInboundPortList.

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.13.1.3

hh3cEponUniMonitorPort

UNI monitor port.

hh3cEponUniMirrorRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.13.1.4

RowStatus, Now support three status: createAndGo, active, destroy.

IF-MIBifIndex hh3cEponUniIndex hh3cEponUniMultActVlan hh3cEponUniMultActAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.25506.2.42.5.1.13.1.5

hh3cEponUniMirrorGroupIdNextTable

table

.1.3.6.1.4.1.25506.2.42.5.1.14 · 1 row entry · 1 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniMirrorGroupIdNextTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniMirrorGroupIdNextTable'

The next index table, which is used by hh3cEponUniMirrorGroupTable.

hh3cEponUniMirrorGroupIdNextEntry row .1.3.6.1.4.1.25506.2.42.5.1.14.1

The entry of the table hh3cEponUniMirrorGroupIdNextEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cEponUniMirrorGroupIDNext This object contains an appropriate value to be used for hh3cEponUniMirrorGroupID when creating rows in the hh3cEponUniMirrorGroupTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.42.5.1.14.1.1`

hh3cEponUniMulticastCtrlInfoTable

table

.1.3.6.1.4.1.25506.2.42.5.1.15 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniMulticastCtrlInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniMulticastCtrlInfoTable'

UNI multicast information which is active .

hh3cEponUniMulticastCtrlInfoEntry row .1.3.6.1.4.1.25506.2.42.5.1.15.1

The entry of the table hh3cEponUniMulticastCtrlInfoTable.

Indexes

Column Syntax OID

hh3cEponUniMultActVlan

The multicast vlan ID which is active.

hh3cEponUniMultActAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.15.1.1

The multicast address which is active.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.42.5.1.15.1.2

hh3cEponUniMultActAccessRule

deny - deny the multicast packet.
permit - permit the multicast packet.
preview - permit the multicast packet with conditions.

Enumeration

Enumerated Values:

1	deny
2	permit
3	preview

.1.3.6.1.4.1.25506.2.42.5.1.15.1.3

hh3cEponUniMultActPreTimes

The number of multicast preview times which is active.

hh3cEponUniMultActPreRemain

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.15.1.4

The remanent time slice of multicast preview which is active.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.15.1.5

hh3cEponUniMulticastIndexNextTable

table

.1.3.6.1.4.1.25506.2.42.5.1.16 · 1 row entry · 1 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponUniMulticastIndexNextTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponUniMulticastIndexNextTable'

The next index table, which is used by hh3cEponUniMulticastControlTable.

hh3cEponUniMulticastIndexNextEntry row .1.3.6.1.4.1.25506.2.42.5.1.16.1

The entry of the table hh3cEponUniMulticastIndexNextEntry.

Indexes

IF-MIBifIndex hh3cEponCTCAlarmID

Column	Syntax	OID
hh3cEponUniMulticastConfIndexNext This object contains an appropriate value to be used for hh3cEponUniMulticastIndex when creating rows in the hh3cEponUniMulticastControlTable.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.42.5.1.16.1.1`

hh3cEponCTCAlarmTable

table

.1.3.6.1.4.1.25506.2.42.5.1.17 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cEponCTCAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cEponCTCAlarmTable'

This table is used for setting CTC alarm of an ONU.

hh3cEponCTCAlarmEntry row .1.3.6.1.4.1.25506.2.42.5.1.17.1

The entry of the hh3cEponCTCAlarmTable.

Indexes

Column Syntax OID

hh3cEponCTCAlarmID

The CTC alarm ID. There are 3 types of CTC alarms.
ONU alarm: 0x0001~0x00ff
PON alarm: 0x0101~0x01ff
UNI alarm: 0x0301~0x05ff

Enumeration

Enumerated Values:

1	onuEquipmentAlarm
2	onuPowerAlarm
3	onuBatteryMissing
4	onuBatteryFailure
5	onuBatteryVoltLow
6	onuPhysicalIntrusionAlarm
7	onuONUSelfTestFailure
9	onuONUTempHighAlarm
10	onuONUTempLowAlarm
11	onuIADConnectionFailure
12	onuPonIFSwitch
13	onuSleepStatusUpdate
257	ponRXPowerHighAlarm
258	ponRXPowerLowAlarm
259	ponTXPowerHighAlarm
260	ponTXPowerLowAlarm
261	ponTXBiasHighAlarm
262	ponTXBiasLowAlarm
263	ponVccHighAlarm
264	ponVccLowAlarm
265	ponTempHighAlarm
266	ponTempLowAlarm
267	ponRXPowerHighWarning
268	ponRXPowerLowWarning
269	ponTXPowerHighWarning
270	ponTXPowerLowWarning
271	ponTXBiasHighWarning
272	ponTXBiasLowWarning
273	ponVccHighWarning
274	ponVccLowWarning
275	ponTempHighWarning
276	ponTempLowWarning
277	ponDownstreamDropEventsAlarm
278	ponUpstreamDropEventsAlarm
279	ponDownstreamCRCErrorFramesAlarm
280	ponUpstreamCRCErrorFramesAlarm
281	ponDownstreamUndersizeFramesAlarm
282	ponUpstreamUndersizeFramesAlarm
283	ponDownstreamOversizeFramesAlarm
284	ponUpstreamOversizeFramesAlarm
285	ponDownstreamFragmentsAlarm
286	ponUpstreamFragmentsAlarm
287	ponDownstreamJabbersAlarm
288	ponUpstreamJabbersAlarm
289	ponDownstreamDiscardsAlarm
290	ponUpstreamDiscardsAlarm
291	ponDownstreamErrorsAlarm
292	ponUpstreamErrorsAlarm
293	ponDownstreamDropEventsWarning
294	ponUpstreamDropEventsWarning
295	ponDownstreamCRCErrorFramesWarning
296	ponUpstreamCRCErrorFramesWarning
297	ponDownstreamUndersizeFramesWarning
298	ponUpstreamUndersizeFramesWarning
299	ponDownstreamOversizeFramesWarning
300	ponUpstreamOversizeFramesWarning
301	ponDownstreamFragmentsWarning
302	ponUpstreamFragmentsWarning
303	ponDownstreamJabbersWarning
304	ponUpstreamJabbersWarning
305	ponDownstreamDiscardsWarning
306	ponUpstreamDiscardsWarning
307	ponDownstreamErrorsWarning
308	ponUpstreamErrorsWarning
769	uniEthPortAutoNegFailure
770	uniEthPortLOS
771	uniEthPortFailure
772	uniEthPortLoopback
773	uniEthPortCongestion
774	uniDownstreamDropEventsAlarm
775	uniUpstreamDropEventsAlarm
776	uniDownstreamCRCErrorFramesAlarm
777	uniUpstreamCRCErrorFramesAlarm
778	uniDownstreamUndersizeFramesAlarm
779	uniUpstreamUndersizeFramesAlarm
780	uniDownstreamOversizeFramesAlarm
781	uniUpstreamOversizeFramesAlarm
782	uniDownstreamFragmentsAlarm
783	uniUpstreamFragmentsAlarm
784	uniDownstreamJabbersAlarm
785	uniUpstreamJabbersAlarm
786	uniDownstreamDiscardsAlarm
787	uniUpstreamDiscardsAlarm
788	uniDownstreamErrorsAlarm
789	uniUpstreamErrorsAlarm
790	uniStatusChangeTimesAlarm
791	uniDownstreamDropEventsWarning
792	uniUpstreamDropEventsWarning
793	uniDownstreamCRCErrorFramesWarning
794	uniUpstreamCRCErrorFramesWarning
795	uniDownstreamUndersizeFramesWarning
796	uniUpstreamUndersizeFramesWarning
797	uniDownstreamOversizeFramesWarning
798	uniUpstreamOversizeFramesWarning
799	uniDownstreamFragmentsWarning
800	uniUpstreamFragmentsWarning
801	uniDownstreamJabbersWarning
802	uniUpstreamJabbersWarning
803	uniDownstreamDiscardsWarning
804	uniUpstreamDiscardsWarning
805	uniDownstreamErrorsWarning
806	uniUpstreamErrorsWarning
807	uniStatusChangeTimesWarning
1025	uniPOTSPortFailure
1281	uniE1PortFailure
1282	uniE1TimingUnlock
1283	uniE1LOS

.1.3.6.1.4.1.25506.2.42.5.1.17.1.1

hh3cEponCTCAlarmProtocol

Choose a CTC protocol to set CTC alarm of an ONU.
auto(0) - Automatically select a CTC protocol.
ctc21(33) - Use CTC2.1 protocol.
ctc30(48) - Use CTC3.0 or later protocols.

Enumerationr/w

Enumerated Values:

0	auto
33	ctc21
48	ctc30

.1.3.6.1.4.1.25506.2.42.5.1.17.1.2

hh3cEponCTCAlarmEnable

Enable or disable a CTC alarm of an ONU.
true(1) - alarm enable.
false(2) - alarm disable.

hh3cEponCTCAlarmTriggerThresVal

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.17.1.3

Trigger threshold value of a CTC alarm on an ONU.
For different CTC alarms, there are different units(dBm, mA, V, C).

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.17.1.4

hh3cEponCTCAlarmClearThresVal

Clear threshold value of a CTC alarm on an ONU.
For different CTC alarms, there are different units(dBm, mA, V, C).

OctetStringr/w

.1.3.6.1.4.1.25506.2.42.5.1.17.1.5

hh3cUniStatisticsTable

table

.1.3.6.1.4.1.25506.2.42.5.1.19 · 1 row entry · 2 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cUniStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cUniStatisticsTable'

This table is used for enabling or disabling statistics and setting period of a UNI.

hh3cUniStatisticsEntry row .1.3.6.1.4.1.25506.2.42.5.1.19.1

The entry of the hh3cUniStatisticsTable.

Indexes

hh3cUniStatisticsPeriodVal

Column Syntax OID

UNI statistics period value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.42.5.1.19.1.1

hh3cUniStatisticsEnable

Enable or disable statistics of an UNI.
true(1) - statistics enable.
false(2) - statistics disable.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.19.1.2

hh3cUniPoeTable

table

.1.3.6.1.4.1.25506.2.42.5.1.20 · 1 row entry · 6 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cUniPoeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cUniPoeTable'

This table is used for configuring the PoE function for UNIs.

hh3cUniPoeEntry row .1.3.6.1.4.1.25506.2.42.5.1.20.1

The entry of the hh3cUniPoeTable.

Indexes

Column Syntax OID

hh3cUniPoeEnable

Enable PoE for an UNI.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.20.1.1

hh3cUniPoeMode

Set the PoE mode for an UNI.

Enumerationr/w

Enumerated Values:

0	signal
1	spare

.1.3.6.1.4.1.25506.2.42.5.1.20.1.2

hh3cUniPoePriority

Set the PoE priority for an UNI.

Enumerationr/w

Enumerated Values:

0	high
1	critical
2	low

.1.3.6.1.4.1.25506.2.42.5.1.20.1.3

hh3cUniPoeMaxPowerClass

Set the PoE max power class for an UNI.

Enumerationr/w

Enumerated Values:

0	default
1	class0
2	class1
3	class2
4	class3
5	class4
255	undefined

.1.3.6.1.4.1.25506.2.42.5.1.20.1.4

hh3cUniPoeMaxPowerValue

Set the PoE max power value for an UNI.

mWSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.20.1.5

hh3cUniPoeLegacyEnable

Enable PoE legacy PD detection for an UNI.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.20.1.6

hh3cUniPoeInfoTable

table

.1.3.6.1.4.1.25506.2.42.5.1.21 · 1 row entry · 18 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cUniPoeInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-EPON-UNI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-EPON-UNI-MIB::hh3cUniPoeInfoTable'

This table is used for getting UNIs' PoE information.

hh3cUniPoeInfoEntry row .1.3.6.1.4.1.25506.2.42.5.1.21.1

The entry of the hh3cUniPoeInfoTable.

Indexes

hh3cUniPoeInfoLegacyEnable

Column Syntax OID

hh3cUniPoeInfoCapability

UNI PoE capability.

Enumeration

Enumerated Values:

0	incapable
1	capable

.1.3.6.1.4.1.25506.2.42.5.1.21.1.1

hh3cUniPoeInfoEnable

UNI PoE enabling status.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.21.1.2

UNI PoE legacy PD detection enabling status.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.42.5.1.21.1.3

hh3cUniPoeInfoMode

UNI PoE mode.

Enumeration

Enumerated Values:

0	signal
1	spare

.1.3.6.1.4.1.25506.2.42.5.1.21.1.4

hh3cUniPoeInfoPriority

UNI PoE priority.

Enumeration

Enumerated Values:

0	high
1	critical
2	low

.1.3.6.1.4.1.25506.2.42.5.1.21.1.5

hh3cUniPoeInfoMaxPwrClass

UNI PoE max power class.

Enumeration

Enumerated Values:

0	default
1	class0
2	class1
3	class2
4	class3
5	class4
255	undefined

.1.3.6.1.4.1.25506.2.42.5.1.21.1.6

hh3cUniPoeInfoMaxPwrValue

UNI PoE max power value.

hh3cUniPoeInfoPwrSuppStat

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.7

hh3cUniPoeInfoPdClass

UNI PoE powered device class.

Enumeration

Enumerated Values:

0	default
1	class0
2	class1
3	class2
4	class3
5	class4
255	undefined

.1.3.6.1.4.1.25506.2.42.5.1.21.1.8

UNI PoE power supply status.

Enumeration

Enumerated Values:

0	noNeed
1	searching
2	power
3	force
4	forceFailed
5	powerFailed

.1.3.6.1.4.1.25506.2.42.5.1.21.1.9

hh3cUniPoeInfoSignalErrCnt

UNI PoE signal error count.

hh3cUniPoeInfoPwrDeniedCnt

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.10

UNI PoE power denied count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.11

hh3cUniPoeInfoPwrOverCnt

UNI PoE power overload count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.12

hh3cUniPoeInfoCurOverCnt

UNI PoE current overload count.

hh3cUniPoeInfoPdUndetectCnt

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.13

UNI PoE powered device undetected count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.14

hh3cUniPoeInfoMaxPower

UNI PoE max power.

hh3cUniPoeInfoCurOutputPwr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.15

UNI PoE current output power.

hh3cUniPoeInfoAvgOutputPwr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.16

UNI PoE average output power.

hh3cUniPoeInfoPeakOutputPwr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.42.5.1.21.1.17

UNI PoE peak output power.