HH3C-DOT11-ROAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hh3cDot11MobGrpTable

table

.1.3.6.1.4.1.25506.2.75.10.1.1 · 1 row entry · 7 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cDot11MobGrpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DOT11-ROAM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DOT11-ROAM-MIB::hh3cDot11MobGrpTable'

The table defines the parameters for roaming group configuration.

hh3cDot11MobGrpEntry row .1.3.6.1.4.1.25506.2.75.10.1.1.1

This entry contains information of mobile group.

Indexes

hh3cDot11MobGrpName

Column Syntax OID

hh3cDot11MobGrpName

Represents the name of roam group.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.25506.2.75.10.1.1.1.1

hh3cdot11MobGrpTunnelType

Represents the protocol type of mobility-tunnel.

Hh3cDot11RoamMobileTunnelTyper/w

Type Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.25506.2.75.10.1.1.1.2

hh3cDot11MobGrpSrcIPAddr

Represents the IP address of tunnel source. The IP address
type must be the same as hh3cdot11MobGrpTunnelType.
The default value is zero.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.10.1.1.1.3

hh3cDot11MobGrpAuthMode

Represents the authentication mode of IACTP tunnel.
This object can be used to enable IACTP control message
integrity authentication.

Hh3cDot11RoamAuthModer/w

Type Values:

1	none
2	md5

.1.3.6.1.4.1.25506.2.75.10.1.1.1.4

hh3cDot11MobGrpAuthKey

Represents the authentication key of IACTP tunnel.
Authentication key to be used with the given
authentication method.
This object can not be modified when the value of
hh3cDot11MobGrpAuthMode is 'none'.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.25506.2.75.10.1.1.1.5

hh3cDot11MobGrpEnable

State of a mobile group.
'true' : The WLAN mobility group will be enabled.
'false' : The inter-AC tunnel communication for the
mobility group will be disabled.
A mobility group can be enabled only when the so…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.75.10.1.1.1.6

hh3cDot11MobGrpRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.25506.2.75.10.1.1.1.7

hh3cDot11MobGrpMemberTable

table

.1.3.6.1.4.1.25506.2.75.10.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cDot11MobGrpMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DOT11-ROAM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DOT11-ROAM-MIB::hh3cDot11MobGrpMemberTable'

The table defines the parameters for roaming member configuration.

hh3cDot11MobGrpMemberEntry row .1.3.6.1.4.1.25506.2.75.10.1.2.1

This entry contains information of mobile group member.

Indexes

hh3cDot11MobGrpName hh3cDot11MobGrpMemberIpAddr

Column Syntax OID

hh3cDot11MobGrpMemberIpAddr

Represents the IP address of group member. It can not be
the same as the source IP address of the mobile group.
The address type must be the same as the hh3cdot11MobGrpTunnelType.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.10.1.2.1.1

hh3cDot11MobGrpMemberStatus

Represents the status of group member.

Hh3cDot11RoamIACTPStatus

Type Values:

1	init
2	idle
3	joinRequestWait
4	joinResponseWait
5	joinConfirmWait
6	joinError
7	run

.1.3.6.1.4.1.25506.2.75.10.1.2.1.2

hh3cDot11MobGrpMemberIf

Represents the tunnel interface name of group member.

OctetString

.1.3.6.1.4.1.25506.2.75.10.1.2.1.3

hh3cDot11MobGrpMemberUpTime

Represents the sustaining time from tunnel up. If tunnel
is down, MemberUpTime is zero.

secondSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.10.1.2.1.4

hh3cDot11MobGrpMemberRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.25506.2.75.10.1.2.1.5

hh3cDot11RoamInInfoTable

table

.1.3.6.1.4.1.25506.2.75.10.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cDot11RoamInInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DOT11-ROAM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DOT11-ROAM-MIB::hh3cDot11RoamInInfoTable'

The table can used to display the information of roaming in client.

hh3cDot11RoamInInfoEntry row .1.3.6.1.4.1.25506.2.75.10.2.1.1

This entry contains information of roaming in client.

Indexes

hh3cDot11RoamClientMAC

Column Syntax OID

hh3cDot11RoamClientMAC

Represents the MAC address of roaming in client.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.25506.2.75.10.2.1.1.1

hh3cDot11RoamInClientBSSID

Represents BSSID of the AP to which the Roam-In client is associated.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.25506.2.75.10.2.1.1.2

hh3cDot11RoamInClientVlanID

Represents the VLAN ID of Roam-In client.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.10.2.1.1.3

hh3cDot11RoamInHomeACIPType

Represents the protocol type of home AC address.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.25506.2.75.10.2.1.1.4

hh3cDot11RoamInHomeACIPAddr

Represents the address of home AC.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.10.2.1.1.5

hh3cDot11RoamOutInfoTable

table

.1.3.6.1.4.1.25506.2.75.10.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cDot11RoamOutInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DOT11-ROAM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DOT11-ROAM-MIB::hh3cDot11RoamOutInfoTable'

The table can used to display the information of roaming out client.

hh3cDot11RoamOutInfoEntry row .1.3.6.1.4.1.25506.2.75.10.2.2.1

This entry contains information of roaming out client.

Indexes

hh3cDot11RoamClientMAC

Column Syntax OID

hh3cDot11RoamOutClientBSSID

Represents the BSSID of the AP to which the Roam-Out client is
associated.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.25506.2.75.10.2.2.1.1

hh3cDot11RoamOutClientVlanID

Represents the VLAN ID of Roam-Out client.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.10.2.2.1.2

hh3cDot11RoamOutForeignACIPType

Represents the protocol type of foreign AC address.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.25506.2.75.10.2.2.1.3

hh3cDot11RoamOutForeignACIPAddr

Represents the address of foreign AC.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.10.2.2.1.4

hh3cDot11RoamOutClientUpTime

Represents how long the Roam-Out client is associated with the foreign
AC.

secondSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.10.2.2.1.5

hh3cDot11RoamTrackTable

table

.1.3.6.1.4.1.25506.2.75.10.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cDot11RoamTrackTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DOT11-ROAM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DOT11-ROAM-MIB::hh3cDot11RoamTrackTable'

The table contains the roam-track information of a
specified client on the client's HA.

hh3cDot11RoamTrackEntry row .1.3.6.1.4.1.25506.2.75.10.2.3.1

This entry contains information of a specified client on the
client's HA.

Indexes

hh3cDot11RoamTrackIndex

Column Syntax OID

hh3cDot11RoamTrackIndex

Represents the index of this entry.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.10.2.3.1.1

hh3cDot11RoamTrackClientMAC

Represents the MAC address of the roamed client.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.25506.2.75.10.2.3.1.2

hh3cDot11RoamTrackBSSID

Represents the BSSID of the AP with which the client is associated.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.25506.2.75.10.2.3.1.3

hh3cDot11RoamTrackUpTime

Represents how long the client is associated with the BSSID.

secondSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.10.2.3.1.4

hh3cDot11RoamTrackACIPType

Represents the protocol type of the IP address of the access
controller with which the client is connected.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.25506.2.75.10.2.3.1.5

hh3cDot11RoamTrackACIPAddr

Represents the IP address of the access controller with which
the client is connected.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.10.2.3.1.6