HH3C-DOT11-CFG-MIB Table View

The table defines the parameters for radio policy, as per
radio policy of CLI.
One radio policy could be assigned to the different radios (AP).

hh3cDot11RadioPolicyEntry row .1.3.6.1.4.1.25506.2.75.4.2.1.1

Each entry contains information of each radio policy.

Indexes

hh3cDot11RadioPolicyName

Column	Syntax	OID
hh3cDot11RadioPolicyName Represents the name of radio policy.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.2.1.1.1
hh3cDot11BeaconInterval Represents the interval for Beacon management frame.	TUSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.2
hh3cDot11DtimInterval Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.3
hh3cDot11RtsThreshold Represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.4
hh3cDot11FragThreshold Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.5
hh3cDot11ShortRetryThreshold Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, which shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.6
hh3cDot11LongRetryThreshold Represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.7
hh3cDot11MaxRxLifetime Represents the elapsed time. After the time specified by hh3cDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.	millisecondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.4.2.1.1.8
hh3cDot11RdoPolicyRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.2.1.1.9
hh3cDot11RdoClientMaxCount Represent the maximum number of stations supported by this radio policy.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.10
hh3cDot11BeaconIntervalMs Represents the interval for Beacon management frame.	msSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.1.1.11

The table defines the parameters for ESS, as per service policy
of CLI.
One service policy could be assigned to the different radios
(AP).

hh3cDot11ServicePolicyEntry row .1.3.6.1.4.1.25506.2.75.4.2.2.1

Each entry contains information of each service policy.

Indexes

hh3cDot11ServicePolicyID

Column	Syntax	OID
hh3cDot11ServicePolicyID Represents the ID of each service policy.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.2.2.1.1
hh3cDot11SSIDName Represents the ESS. As per CLI, the value of service policy name will be SSID.	HH3C-DOT11-REF-MIBHh3cDot11SSIDStringTyper/w	.1.3.6.1.4.1.25506.2.75.4.2.2.1.2
hh3cDot11SSIDHidden This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.2.1.3
hh3cDot11AuthenMode Represents the Authentication mode defined by 802.11.	HH3C-DOT11-REF-MIBHh3cDot11AuthenTyper/w Type Values: 1 none 2 opensystem 3 sharedkey 4 all	.1.3.6.1.4.1.25506.2.75.4.2.2.1.4
hh3cDot11SSIDEncryptionMode Represents the encryption mode for this ESS.	HH3C-DOT11-REF-MIBHh3cDot11SSIDEncryptModeTyper/w Type Values: 1 cleartxt 2 cipher 3 ext	.1.3.6.1.4.1.25506.2.75.4.2.2.1.5
hh3cDot11WlanInfBindingType Represents the service policy will bind to what kind of data forwarding interface.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.2.2.1.6
hh3cDot11WlanInfBindingID Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.7
hh3cDot11SrvPolicyRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.2.2.1.8
hh3cDot11ClientMaxCount Represent the maximum number of stations supported by this service policy.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.9
hh3cDot11SPInCirMode CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.	HH3C-DOT11-REF-MIBHh3cDot11CirModer/w Type Values: 1 static 2 dynamic	.1.3.6.1.4.1.25506.2.75.4.2.2.1.10
hh3cDot11SPInCirValue Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.11
hh3cDot11SPOutCirMode CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.	HH3C-DOT11-REF-MIBHh3cDot11CirModer/w Type Values: 1 static 2 dynamic	.1.3.6.1.4.1.25506.2.75.4.2.2.1.12
hh3cDot11SPOutCirValue Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.13
hh3cDot11WlanInfPVID Represents the VLAN ID of SSID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.14
hh3cDot11SPInCirStaticValue Represents the CIR of inbound direction for static CIR mode.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.15
hh3cDot11SPOutCirStaticValue Represents the CIR of outbound direction for static CIR mode.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.16
hh3cDot11SPIsolate If it is true, then stations connected with the service policy are isolated.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.2.1.17
hh3cDot11WlanexAuthServerIP Represents the IP address of the Wlanex Authentication server	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.75.4.2.2.1.18
hh3cDot11SPBeaconMeasEnable If it is true, then beacon-measurement is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.2.1.19
hh3cDot11SPBeaconMeasType Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMeasurement will use the active type. beac…	Enumerationr/w Enumerated Values: 1 passive 2 active 3 beaconTable	.1.3.6.1.4.1.25506.2.75.4.2.2.1.20
hh3cDot11SPBeaconMeasInterval Represents the beacon-measurement interval.	secondInteger32r/w Constraints: range: 10-200	.1.3.6.1.4.1.25506.2.75.4.2.2.1.21
hh3cDot11AuthenModeCM Represents the Authentication mode defined by 802.11.	Enumerationr/w Enumerated Values: 0 opensystem 1 sharedkey	.1.3.6.1.4.1.25506.2.75.4.2.2.1.22
hh3cDot11SecIEStatusCM To enable the security Information element in the beacon and probe response frames sent by AP.	Enumerationr/w Enumerated Values: 0 none 1 wpa 2 wpa2 3 wlanex	.1.3.6.1.4.1.25506.2.75.4.2.2.1.23
hh3cDot11SecurityCiphersCM The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configuration or undo operation.	Enumerationr/w Enumerated Values: 0 none 1 wep40 2 wep104 3 tkip 4 aesccmp 5 wpisms4	.1.3.6.1.4.1.25506.2.75.4.2.2.1.24
hh3cDot11SrvPolicyStatusCM The status of the Service Policy.	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.25506.2.75.4.2.2.1.25
hh3cDot11SSIDHiddenCM This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames.	HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w Type Values: 0 dot11false 1 dot11true	.1.3.6.1.4.1.25506.2.75.4.2.2.1.26
hh3cDot11SPIsolateCM If it is dot11true, the clients connected with the service policy are isolated to each other.	HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w Type Values: 0 dot11false 1 dot11true	.1.3.6.1.4.1.25506.2.75.4.2.2.1.27
hh3cDot11FwdVlanBitMapLow Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.25506.2.75.4.2.2.1.28
hh3cDot11FwdVlanBitMapHigh Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.25506.2.75.4.2.2.1.29
hh3cDot11ServicePolicyName Represents the name of each service policy.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.2.2.1.30
hh3cDot11SecurityModeCM Determines the security modes of the WLAN port. none - The default value. No security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key ne…	Enumerationr/w Enumerated Values: 0 none 1 psk 2 radius 3 wlanex	.1.3.6.1.4.1.25506.2.75.4.2.2.1.31
hh3cDot11SPInCbsValue Represents the CBS of inbound direction of this service policy. If the value is 0, it means that the CBS is automatically calculated from the value of CIR.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.32
hh3cDot11SPOutCbsValue Represents the CBS of outbound direction of this service policy. If the value is 0, it means that the CBS is automatically calculated from the value of CIR.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.33
hh3cDot11WlanInfCustomerPVID Represents the customer PVID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.2.1.34

The table defines the parameters for ESS, as per service policy
of CLI.
When the value of hh3cDot11SSIDEncryptionMode equals to cipher(2),
more configuration for a ESS will be put into the table.

hh3cDot11ServicePolicyExtEntry row .1.3.6.1.4.1.25506.2.75.4.2.3.1

Each entry contains information of each service policy under cipher(2)
mode.

Indexes

hh3cDot11ServicePolicyExtID

Column	Syntax	OID
hh3cDot11ServicePolicyExtID Represents the ID of each service policy.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.2.3.1.1
hh3cDot11SecIEStatus To enable the security Information element in the beacon and probe response frames sent by AP.	HH3C-DOT11-REF-MIBHh3cDot11SecIEStatusTyper/w Type Values: 1 none 2 rsn 3 wpa 4 all 5 ext	.1.3.6.1.4.1.25506.2.75.4.2.3.1.2
hh3cDot11SecurityCiphers The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy, it could support multiple cipher types at the same ti…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.3.1.3
hh3cDot11CipherKeyIndex Represents the key index of cipher key for packet. When hh3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.3.1.4
hh3cDot11CipherKey Represents the cipher key for packet. When hh3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.2.3.1.5
hh3cDot11SrvPolicyExtRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.2.3.1.6
hh3cDot11CipherKeyType Represents the cipher key type of hh3cDot11CipherKey.	Enumerationr/w Enumerated Values: 1 char 2 hex	.1.3.6.1.4.1.25506.2.75.4.2.3.1.7
hh3cDot11AkmMode The authentication and key management mode.	Enumerationr/w Enumerated Values: 0 none 1 dot1x 2 psk	.1.3.6.1.4.1.25506.2.75.4.2.3.1.8
hh3cDot11PskKey Represents the preshared key. This configuration takes effect if the hh3cDot11AkmMode value is psk.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.2.3.1.9

The table defines the radio policy of each radio.
It can't be modified if the radio policy is a default radio policy.

hh3cDot11RadioPolicyExtEntry row .1.3.6.1.4.1.25506.2.75.4.2.4.1

Each entry contains information of each radio policy.

Indexes

hh3cDot11RPAPSerialID hh3cDot11RPRadioID

Column	Syntax	OID
hh3cDot11RPAPSerialID This object represents the Serial ID of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.2.4.1.1
hh3cDot11RPRadioID This object represents each radio.	HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType	.1.3.6.1.4.1.25506.2.75.4.2.4.1.2
hh3cDot11RPBeaconInterval This object represents the interval for Beacon management frame.	millisecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.3
hh3cDot11RPDtimInterval This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.4
hh3cDot11RPRtsThreshold This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.5
hh3cDot11RPFragThreshold This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers a…	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.6
hh3cDot11RPShortRetryThreshold This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.7
hh3cDot11RPLongRetryThreshold This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, and that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.8
hh3cDot11RPClientMaxCount This object represents the maximum number of stations supported by this radio policy.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.9
hh3cDot11RPBeaconIntervalCM This object represents beacon interval.	timeunitSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.4.1.10

This table defines the WLAN security status for ESS, BSS and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
hh3cPortSecurityTables should be used to configure port security.

hh3cDot11SrvPortSecurityEntry row .1.3.6.1.4.1.25506.2.75.4.2.5.1

There is a row in this table for service policy.

Indexes

hh3cDot11SecurityServicePolicyID

Column	Syntax	OID
hh3cDot11SecurityServicePolicyID Represents the ID of each service policy.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.2.5.1.1
hh3cDot11SrvPortSecurityMode Determines the security modes of the WLAN port. noRestrictions The default value, no any security mode is set. userLoginSecureExt Access to the port is denied until the port client is aut…	Enumerationr/w Enumerated Values: 1 noRestrictions 2 userLoginSecureExt 3 psk 4 macAddressAndPsk 5 userLoginSecureExtOrPsk 6 ext	.1.3.6.1.4.1.25506.2.75.4.2.5.1.2
hh3cDot11SrvSecurityKeyType This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.…	Enumerationr/w Enumerated Values: 1 userLoginTxKeyTypeNone 2 userLoginTxKeyTypeDot11Key 3 userLoginTxKeyTypeRsaRC4Key	.1.3.6.1.4.1.25506.2.75.4.2.5.1.3
hh3cDot11SrvSecurityPskKeyMode This is the password input mode. When input as pskKeyModePassPhrase, hh3cDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hh3cDot11SrvSecurityPskKeyString must be 64 characters a…	Enumerationr/w Enumerated Values: 1 pskKeyModeNone 2 pskKeyModePassPhrase 3 pskKeyModeRawKey	.1.3.6.1.4.1.25506.2.75.4.2.5.1.4
hh3cDot11SrvSecurityPskKeyString This is the password string used for psk authentication.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.25506.2.75.4.2.5.1.5
hh3cDot11SrvPortSecurityModeCM Determines the security modes of the WLAN port. none - The default value, no any security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X ke…	Enumerationr/w Enumerated Values: 0 none 1 psk 2 radius 3 wlanex	.1.3.6.1.4.1.25506.2.75.4.2.5.1.6

The table defines the parameters of each service policy.

hh3cDot11SrvPolicyExtendEntry row .1.3.6.1.4.1.25506.2.75.4.2.6.1

Each entry contains information of each service policy.

Indexes

hh3cDot11ServicePolicyID

Column	Syntax	OID
hh3cDot11SPEnable Represents whether the service policy is enabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.75.4.2.6.1.1

This table defines the Layer 2 authentication status of service
templates.

hh3cDot11SrvL2AuthenEntry row .1.3.6.1.4.1.25506.2.75.4.2.7.1

There is a row for a service template.

Indexes

hh3cDot11SrvL2AuthenID

Column	Syntax	OID
hh3cDot11SrvL2AuthenID Represents the ID of a service template.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.2.7.1.1
hh3cDot11L2AuthenMode Authentication mode of the service template. bypass No authentication is required. macAuthentication MAC authentication. macThenDot1xAuthentication MAC authentication is e…	Enumerationr/w Enumerated Values: 1 bypass 2 macAuthentication 3 macThenDot1xAuthentication 4 dot1xAuthentication 5 dot1xThenMacAuthentication 6 ouiThenDot1x 7 macAndDot1x	.1.3.6.1.4.1.25506.2.75.4.2.7.1.2
hh3cDot11L2IntrusProtectEnable Enables intrusion protection for the service template.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.3
hh3cDot11L2IntrusProtectOpt Operation mode when intrusion is detected.	Enumerationr/w Enumerated Values: 1 blockMACTemporarily 2 stopServiceTemporarily 3 stopService	.1.3.6.1.4.1.25506.2.75.4.2.7.1.4
hh3cDot11TempServiceStopTimer Time period for temporarily stopping service.	Integer32r/w Constraints: range: 10-300	.1.3.6.1.4.1.25506.2.75.4.2.7.1.5
hh3cDot11TempBlockMACTimer Time period for temporarily blocking user MACs.	Integer32r/w Constraints: range: 60-300	.1.3.6.1.4.1.25506.2.75.4.2.7.1.6
hh3cDot11L2IgnoreAuthorization Ignores all authorization information set by the server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.7
hh3cDot11L2FailVLAN VLAN for authentication failure. 0 means not configured.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.75.4.2.7.1.8
hh3cDot11L2CriticalVLAN VLAN for server unavailability situation. 0 means not configured.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.75.4.2.7.1.9
hh3cDot11L2AuthorFailOffline Users are logged off if authorization fails.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.10
hh3cDot11L2AccountFailOffline Users are logged off if accounting fails.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.11
hh3cDot11Dot1xHSEnable Enables 802.1X handshake.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.12
hh3cDot11Dot1xSecureHSEnable Enables secure 802.1X handshake.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.13
hh3cDot11Dot1xReauthenEnable Enables 802.1X reauthentication.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.7.1.14
hh3cDot11Dot1xMandatoryDomain 802.1X authentication domain of users for the service template.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.2.7.1.15
hh3cDot11Dot1xMaxUserCount Maximum number of 802.1X users supported by the BSS bound to the service template.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.7.1.16
hh3cDot11MACAuthenDomain MAC authentication domain of users for the service template.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.2.7.1.17
hh3cDot11MACAuthenMaxUserCount Maximum number of MAC authentication users supported by the BSS bound to the service template.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.2.7.1.18

The table specifies the IP learning type and status
of service templates.

hh3cDot11IPLearningEntry row .1.3.6.1.4.1.25506.2.75.4.2.8.1

Each entry contains information about an IP learning entry.

Indexes

hh3cDot11IPLearningServiceName hh3cDot11IPLearningType

Column	Syntax	OID
hh3cDot11IPLearningServiceName Represents the service name.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.25506.2.75.4.2.8.1.1
hh3cDot11IPLearningType Represents the IP learning type.	Enumeration Enumerated Values: 1 invalid 2 arp 3 dhcp 4 dhcp6 5 nd	.1.3.6.1.4.1.25506.2.75.4.2.8.1.2
hh3cDot11IPLearningStatus Represents the ip learning status of the interface. Setting this attribute to true enables IP learning on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.2.8.1.3
hh3cDot11IPLearningVlanBitMapL Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8 and the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represe…	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.25506.2.75.4.2.8.1.4
hh3cDot11IPLearningVlanBitMapH Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8 and the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represe…	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.25506.2.75.4.2.8.1.5

By AP template CLI, administrator will configure the parameters of AP
by convenience.
Before AP boot up and connect to AC by CAPWAP tunnel, administrator
will create AP template for each AP.  When AP connect to AC,
AC will assign configuration to AP by hh3cDot11APSerialID
information in AP template.

hh3cDot11APTemplateEntry row .1.3.6.1.4.1.25506.2.75.4.3.1.1

Each entry contains configuration information for each AP.

Indexes

hh3cDot11APTemplateName

Column	Syntax	OID
hh3cDot11APTemplateName Represents the name of AP template.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.3.1.1.1
hh3cDot11APSerialID Represents AP serial id.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.2
hh3cDot11TemplateAPModelAlias Represents the alias of AP model name.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.3
hh3cDot11Description This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.4
hh3cDot11APWorkMode Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device de…	Enumerationr/w Enumerated Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.25506.2.75.4.3.1.1.5
hh3cDot11APTemplateRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.3.1.1.6
hh3cDot11APName Represents the AP name.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.7
hh3cDot11StatisInterv Represents the interval of radio statistic.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.8
hh3cDot11APBroadcastProbeReply Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.1.1.9
hh3cDot11StaIdleTimerInterv Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.10
hh3cDot11StaKeepAliveTimerInterv Represents the interval of the keep alive requests sent between AP and STA.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.11
hh3cDot11APCir Represents the committed information rate between AP and AC.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.12
hh3cDot11APCbs Represents the committed burst size between AP and AC.	BytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.13
hh3cDot11APPriorityLevel This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.25506.2.75.4.3.1.1.14
hh3cDot11APElementID This object represents the AP element ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.15
hh3cDot11APDevDetectEnable Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.1.1.16
hh3cDot11APGetIPMethod This object represents the method how AP gets IP address.	Enumerationr/w Enumerated Values: 1 dhcpAlloc 2 static	.1.3.6.1.4.1.25506.2.75.4.3.1.1.17
hh3cDot11StatisIntervMode This object represents the mode of statics interval. normal - statics interval value between 10s to 240s realtime - statics interval value between 0s to 5s	Enumerationr/w Enumerated Values: 1 normal 2 realtime	.1.3.6.1.4.1.25506.2.75.4.3.1.1.18
hh3cDot11ApTrapEnabled Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.1.1.19
hh3cDot11ApFmwUpdState Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically. inherit - The st…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 inherit	.1.3.6.1.4.1.25506.2.75.4.3.1.1.20
hh3cDot11StatisIntervModeCM This object represents the mode of statistic interval. off - statistic interval value between 10s to 240s on - statistic interval value between 0s to 5s	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.25506.2.75.4.3.1.1.21
hh3cDot11ApNasIDCM Represents the NAS-ID of current service policy for each specific radio of AP.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.22
hh3cDot11ApCoveragetype This object represents the coverage type of AP. school - the coverage type is school traffic - the coverage type is traffic shop - the coverage type is shop company - the coverage type is company	Enumerationr/w Enumerated Values: 1 school 2 traffic 3 shopping 4 company	.1.3.6.1.4.1.25506.2.75.4.3.1.1.23
hh3cDot11APControlAddressState Represents the status of control address for an AP. The following values are supported: enable - AC rediscovery will be enabled. disable - AC rediscovery will be disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.75.4.3.1.1.24
hh3cDot11APControlAddressIPv4 Represents an AC IPv4 address for AC rediscovery.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.75.4.3.1.1.25
hh3cDot11APControlAddressIPv6 Represents an AC IPv6 address for AC rediscovery.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.26
hh3cDot11APLocalACName Represents the local AC name the AP belongs to.	OctetString	.1.3.6.1.4.1.25506.2.75.4.3.1.1.27
hh3cDot11APEchoInterval This object represents the echo-interval of the AP.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.1.1.28
hh3cDot11APProvisionAPIPv4 Represents the IPv4 address of an AP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.75.4.3.1.1.29
hh3cDot11APProvisionIPv4Mask Represents the IPv4 address mask of an AP.	Integer32r/w Constraints: range: 1-31	.1.3.6.1.4.1.25506.2.75.4.3.1.1.30
hh3cDot11APProvisionAPIPv6 Represents the IPv6 address of an AP.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.31
hh3cDot11APProvisionIPv6PrefixLen Represents the IPv6 address prefix length of an AP.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.25506.2.75.4.3.1.1.32
hh3cDot11APProvisionACIPv4 Represents an AC IPv4 address for discovery.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.75.4.3.1.1.33
hh3cDot11APProvisionACIpv6 Represents an AC IPv6 address for discovery.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.34
hh3cDot11APProvisionGateWayIPV4 Represents the gateway IPv4 address for an AP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.75.4.3.1.1.35
hh3cDot11APProvisionGateWayIPV6 Represents thre gateway IPv6 address for an AP.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.36
hh3cDot11APMapConfigFileName Represents the name of the AP MapConfigFile.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.1.1.37

Before AP connects to AC, administrator will configure radio
parameter to each radio.

hh3cDot11RadioToConfigEntry row .1.3.6.1.4.1.25506.2.75.4.3.2.1

Each entry contains configuration information for each radio.

Indexes

hh3cDot11APTemplateNameCfg hh3cDot11CfgRadioID

Column	Syntax	OID
hh3cDot11APTemplateNameCfg Represents the name of AP template.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.3.2.1.1
hh3cDot11CfgRadioID Represents each radio.	HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType	.1.3.6.1.4.1.25506.2.75.4.3.2.1.2
hh3cDot11CfgRadioPolicyName Represents the name of radio policy.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.2.1.3
hh3cDot11CfgRadioType Represents the radio will work with which 802.11 radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioTyper/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an 64 dot11ac 128 dot11gac 256 dot11ax 512 dot11gax	.1.3.6.1.4.1.25506.2.75.4.3.2.1.4
hh3cDot11CfgChannel Represents the channel allocation of radio.	HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeTyper/w	.1.3.6.1.4.1.25506.2.75.4.3.2.1.5
hh3cDot11CfgMaxTxPowerLevel Represents the maximal transmit power scope for AP.	dbmHH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeTyper/w	.1.3.6.1.4.1.25506.2.75.4.3.2.1.6
hh3cDot11PreambleLen Represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen will be valid. Otherwise, the value for it will be …	HH3C-DOT11-REF-MIBHh3cDot11PreambleTyper/w Type Values: 1 long 2 short	.1.3.6.1.4.1.25506.2.75.4.3.2.1.7
hh3cDot11CfgRadioStatus Represents the radio admin status whether is enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.8
hh3cDot11CfgRdElementID Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.4.3.2.1.9
hh3cDot11CfgWorkMode Represents work mode of the radio.	HH3C-DOT11-REF-MIBHh3cDot11WorkModer/w Type Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.25506.2.75.4.3.2.1.10
hh3cDot11CfgPwrAttValue Represents the value of power attenuation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.2.1.11
hh3cDot11RadioTxArithmetic Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the bandwidth first during the transmission.	Enumerationr/w Enumerated Values: 1 quality 2 bandwidth	.1.3.6.1.4.1.25506.2.75.4.3.2.1.12
hh3cDot11CfgChannelLockStat Represents locked status of channel on the radio.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.25506.2.75.4.3.2.1.13
hh3cDot11CfgPowerLockStat Represents locked status of power on the radio.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.25506.2.75.4.3.2.1.14
hh3cDot11CfgLBRdGroupId Represents the load balance group ID allocated for the radio.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.4.3.2.1.15
hh3cDot11CfgRRMSDRdGroupId Represents the RRM self-decisive group ID allocated for the radio.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.4.3.2.1.16
hh3cDot11CfgRadioType2 Represents the radio will work with which 802.11 radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioType2r/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11an 16 dot11gn 32 dot11ac 64 dot11gac 128 dot11ax 256 dot11gax	.1.3.6.1.4.1.25506.2.75.4.3.2.1.17
hh3cDot11CfgIDSEnable Represents whether intrusion detection is enabled for this radio.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.18
hh3cDot11CfgSaEnable Represents whether spectrum analysis is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.19
hh3cDot11CfgSaCltRtFFTData Represents whether to collect real-time FFT data for this radio.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.20
hh3cDot11CfgSaBand Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the foll…	Enumerationr/w Enumerated Values: 1 dot11g 2 dot11aLower 3 dot11aMiddle 4 dot11aUpper	.1.3.6.1.4.1.25506.2.75.4.3.2.1.21
hh3cDot11CfgSaRptDevType Represents which types of interference devices should be reported.	Bitsr/w Enumerated Values: 0 microwave 1 microwaveInverter 2 bluetooth 3 fixedFreqOthers 4 fixedFreqCordlessPhone 5 fixedFreqVideo 6 fixedFreqAudio 7 freqHopperOthers 8 freqHopperCordlessBase 9 freqHopperCordlessNetwork 10 freqHopperXbox 11 genericInterferer	.1.3.6.1.4.1.25506.2.75.4.3.2.1.22
hh3cDot11CfgSaTrapDevEnable Represents whether trap is enabled for an interference device type.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.23
hh3cDot11CfgSaTrapDevType Represents for which interference device types the AP will send traps when trap sending is enabled.	Bitsr/w Enumerated Values: 0 microwave 1 microwaveInverter 2 bluetooth 3 fixedFreqOthers 4 fixedFreqCordlessPhone 5 fixedFreqVideo 6 fixedFreqAudio 7 freqHopperOthers 8 freqHopperCordlessBase 9 freqHopperCordlessNetwork 10 freqHopperXbox 11 genericInterferer	.1.3.6.1.4.1.25506.2.75.4.3.2.1.24
hh3cDot11CfgSaTrapAQEnable Represents whether the channel quality trap is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.25
hh3cDot11CfgSaTrapAQThreshold Represents the channel quality threshold. When the channel quality is below this value, the channel quality trap will be sent.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.25506.2.75.4.3.2.1.26
hh3cDot11CfgSaDrivenRRMEnable Configures whether to run RRM when the AP detects a certain level of interference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.2.1.27
hh3cDot11CfgSaDrivenRRMSnt Configures the threshold for triggering RRM. When the interference level for the AP exceeds the threshold , RRM initiates local dynamic frequency selection (DFS) and changes the channel of the affected radio to improve…	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high	.1.3.6.1.4.1.25506.2.75.4.3.2.1.28
hh3cDot11CfgSPInCirMode Specifies the committed information rate(CIR) mode for the inbound direction. This object is useful only when the corresponding CIR has a nonzero value. If the value of this object is changed, the corresponding CIR will…	HH3C-DOT11-REF-MIBHh3cDot11CirModer/w Type Values: 1 static 2 dynamic	.1.3.6.1.4.1.25506.2.75.4.3.2.1.29
hh3cDot11CfgSPInCirValue Represents the CIR for the inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.2.1.30
hh3cDot11CfgSPOutCirMode Represents the committed information rate(CIR) mode for the outbound direction. This object is useful only when the corresponding CIR has a nonzero value. If the value of this object is changed, the corresponding CIR wi…	HH3C-DOT11-REF-MIBHh3cDot11CirModer/w Type Values: 1 static 2 dynamic	.1.3.6.1.4.1.25506.2.75.4.3.2.1.31
hh3cDot11CfgSPOutCirValue Represents the CIR for the outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.2.1.32

For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.

hh3cDot11APServiceSetEntry row .1.3.6.1.4.1.25506.2.75.4.3.3.1

Each entry contains service policy information for each
specific radio of AP.

Indexes

hh3cDot11APTemplateNameCfg hh3cDot11CfgRadioID hh3cDot11CfgServicePolicyID

Column	Syntax	OID
hh3cDot11CfgServicePolicyID Represents the ID of each service policy used by the AP.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.3.3.1.1
hh3cDot11SrvSetRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.3.3.1.2
hh3cDot11ServiceSetVlanId Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.75.4.3.3.1.3
hh3cDot11ServiceSetVlanGroup Represents the VLAN group of the BSS generated when a service policy is bound to the radio.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.25506.2.75.4.3.3.1.4

The table of the system information for each AP.

hh3cDot11APSysInfoSetEntry row .1.3.6.1.4.1.25506.2.75.4.3.4.1

The system information configuration for each AP.

Indexes

hh3cDot11SIDAPSerialID

Column	Syntax	OID
hh3cDot11APSysNetID Represents the system Net ID for AP.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.3.4.1.1
hh3cDot11APCpuUsageThreshold The CPU usage threshold for AP.	onepercentInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.4.3.4.1.2
hh3cDot11APMemUsageThreshold The memory usage threshold for AP.	onepercentInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.4.3.4.1.3

For each connected APs, administrator could configure a series of
limits.  This table describes the limit information for AP(s).

hh3cDot11APLimitEntry row .1.3.6.1.4.1.25506.2.75.4.3.5.1

Each entry contains the limit information for each AP.

Indexes

HH3C-DOT11-REF-MIBhh3cDot11APElementIndex

Column	Syntax	OID
hh3cDot11APSsidNumLimit Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.75.4.3.5.1.1
hh3cDot11APUserCntLimit Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.75.4.3.5.1.2
hh3cDot11APUserThreshold Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.75.4.3.5.1.3

The table of the interface information for each AP.

hh3cDot11APIfSetEntry row .1.3.6.1.4.1.25506.2.75.4.3.6.1

The interface information configuration for each AP.

Indexes

HH3C-DOT11-REF-MIBhh3cDot11APElementIndex hh3cDot11APSetIfIndex

Column	Syntax	OID
hh3cDot11APSetIfIndex Represents the index for a interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.6.1.1
hh3cDot11APIfAlias This object is an 'alias' name for the interface as specified by a network manager for AP.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.25506.2.75.4.3.6.1.2

For all the radios on the AP, it could configure multiple service policies.
The table describes the relationship between AP and
service policies.

hh3cDot11APServiceVlanEntry row .1.3.6.1.4.1.25506.2.75.4.3.7.1

Each entry contains service policy information for each AP.

Indexes

hh3cDot11APServiceVlanSerialID hh3cDot11APServiceVlanSPID

Column	Syntax	OID
hh3cDot11APServiceVlanSerialID This object represents AP serial id.	OctetString	.1.3.6.1.4.1.25506.2.75.4.3.7.1.1
hh3cDot11APServiceVlanSPID This object represents the ID of each service policy used by the AP.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.3.7.1.2
hh3cDot11APServiceVlanId This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.75.4.3.7.1.3
hh3cDot11APServiceVlanRowStatus This object represents the status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.3.7.1.4

Before AP connects to AC, administrator will configure radio
parameter to each radio.

hh3cDot11RadioConfigEntry row .1.3.6.1.4.1.25506.2.75.4.3.8.1

Each entry contains configuration information for each radio.

Indexes

hh3cDot11RCAPSerialID hh3cDot11RCRadioID

Column	Syntax	OID
hh3cDot11RCAPSerialID This object represents the Serial ID of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.3.8.1.1
hh3cDot11RCRadioID This object represents each radio.	HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType	.1.3.6.1.4.1.25506.2.75.4.3.8.1.2
hh3cDot11RCRadioType This object represents the radio will work with which 802.11 radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioTyper/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an 64 dot11ac 128 dot11gac 256 dot11ax 512 dot11gax	.1.3.6.1.4.1.25506.2.75.4.3.8.1.3
hh3cDot11RCChannel This object represents the channel allocation of radio.	HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeTyper/w	.1.3.6.1.4.1.25506.2.75.4.3.8.1.4
hh3cDot11RCPreambleLen This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen will be valid. Otherwise, the value for…	HH3C-DOT11-REF-MIBHh3cDot11PreambleTyper/w Type Values: 1 long 2 short	.1.3.6.1.4.1.25506.2.75.4.3.8.1.5
hh3cDot11RCPwrAttValue This object represents the value of power attenuation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.8.1.6
hh3cDot11RCApPowerLevel Represents the maximal transmit power scope for AP.	dbmHH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeTyper/w	.1.3.6.1.4.1.25506.2.75.4.3.8.1.7
hh3cDot11RCDynamicChlState Enable/Disable dynamic channel selection.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.8.1.8
hh3cDot11RCDynamicPowerState Enable/Disable dynamic power selection for the band.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.8.1.9
hh3cDot11RCRadioStatus Represents the radio admin status whether is enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.8.1.10
hh3cDot11RCRadioRate Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios,…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.75.4.3.8.1.11
hh3cDot11RCPwrAdjustStepLength Power adjustment step-length in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.8.1.12
hh3cDot11RCRadioType2 This object represents the radio will work with which 802.11 radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioType2r/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11an 16 dot11gn 32 dot11ac 64 dot11gac 128 dot11ax 256 dot11gax	.1.3.6.1.4.1.25506.2.75.4.3.8.1.13
hh3cDot11RCPreambleLenCM This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLenCM will be valid. Otherwise, the value f…	Enumerationr/w Enumerated Values: 0 long 1 short	.1.3.6.1.4.1.25506.2.75.4.3.8.1.14
hh3cDot11RCDynamicChlStateCM Enable/Disable dynamic channel selection.	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.25506.2.75.4.3.8.1.15
hh3cDot11RCRadioStatusCM Represents the radio admin status whether is enabled or disabled.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.25506.2.75.4.3.8.1.16
hh3cDot11RCRadioRateCM Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.75.4.3.8.1.17
hh3cDot11RCDynamicPowerStateCM Enable/disable dynamic power selection for the band.	HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w Type Values: 0 dot11false 1 dot11true	.1.3.6.1.4.1.25506.2.75.4.3.8.1.18
hh3cDot11RCRssiThresholdCM Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.	dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.8.1.19
hh3cDot11RCDynamicChlStateSelfDecisiveCM Enable/disable dynamic channel selection self decisive for the band.	HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w Type Values: 0 dot11false 1 dot11true	.1.3.6.1.4.1.25506.2.75.4.3.8.1.20
hh3cDot11RCDynamicPowerStateSelfDecisiveCM Enable/disable dynamic power selection self decisive for the band.	HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w Type Values: 0 dot11false 1 dot11true	.1.3.6.1.4.1.25506.2.75.4.3.8.1.21

For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.

hh3cDot11RadioSSIDCfgEntry row .1.3.6.1.4.1.25506.2.75.4.3.9.1

Each entry contains SSID configuration information for each radio.

Indexes

hh3cDot11RadioSSIDSerialID hh3cDot11RadioSSIDRadioID hh3cDot11RadioSSIDWLANID

Column	Syntax	OID
hh3cDot11RadioSSIDSerialID This object represents the serial ID of AP.	HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType Type Constraints: range: 0..127	.1.3.6.1.4.1.25506.2.75.4.3.9.1.1
hh3cDot11RadioSSIDRadioID This object represents each radio.	HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType	.1.3.6.1.4.1.25506.2.75.4.3.9.1.2
hh3cDot11RadioSSIDWLANID This object represents the WLAN ID of the BSSID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.9.1.3
hh3cDot11RadioSSIDIndex This object represents the ID of each service policy used by the radio.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDTyper/w	.1.3.6.1.4.1.25506.2.75.4.3.9.1.4
hh3cDot11RadioBSSID As MAC address format, it is used to identify BSS.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.4.3.9.1.5
hh3cDot11RadioSSIDRowStatus RowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.3.9.1.6

The table will provide the general information about APs.

hh3cDot11APSerialIDEntry row .1.3.6.1.4.1.25506.2.75.4.3.10.1

Each entry contains the general information of an AP.

Indexes

hh3cDot11SIDAPSerialID

Column	Syntax	OID
hh3cDot11SIDAPSerialID Represents AP serial id.	OctetString	.1.3.6.1.4.1.25506.2.75.4.3.10.1.1
hh3cDot11SIDAPWorkMode Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection i…	Enumerationr/w Enumerated Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.25506.2.75.4.3.10.1.2
hh3cDot11SIDAPGetIPMethod This object represents the method how AP gets IP address.	Enumerationr/w Enumerated Values: 1 dhcpAlloc 2 static	.1.3.6.1.4.1.25506.2.75.4.3.10.1.3
hh3cDot11SIDAPTemplateName Represents the name of AP template.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.10.1.4
hh3cDot11SIDModelAlias Represents the alias of AP model name.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.10.1.5
hh3cDot11SIDAPDescription This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.10.1.6
hh3cDot11SIDRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.3.10.1.7
hh3cDot11SIDAPName Represents the AP name.	OctetStringr/w	.1.3.6.1.4.1.25506.2.75.4.3.10.1.8
hh3cDot11SIDStatisInterv Represents the interval of radio statistic.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.9
hh3cDot11SIDAPBroadcastProbeReply Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.10.1.10
hh3cDot11SIDAPStaIdleTimerInterv Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.11
hh3cDot11SIDStaKeepAliveTimerInterv Represents the interval of the keep alive requests sent between AP and STA.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.12
hh3cDot11SIDAPCir Represents the committed information rate between AP and AC.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.13
hh3cDot11SIDAPCbs Represents the committed burst size between AP and AC.	BytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.14
hh3cDot11SIDAPPriorityLevel This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.25506.2.75.4.3.10.1.15
hh3cDot11SIDAPElementID This object represents the AP element ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.16
hh3cDot11SIDAPDevDetectEnable Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.3.10.1.17
hh3cDot11SIDAPStatisIntervMode This object represents the mode of statics interval. normal - statics interval value between 10s to 240s realtime - statics interval value between 0s to 5s	Enumerationr/w Enumerated Values: 1 normal 2 realtime	.1.3.6.1.4.1.25506.2.75.4.3.10.1.18
hh3cDot11SIDAPWorkModeCM Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. SemiMonitor - AP will supply WLAN service and Device detect…	Enumerationr/w Enumerated Values: 0 normal 1 monitor 2 semimonitor	.1.3.6.1.4.1.25506.2.75.4.3.10.1.19
hh3cDot11SIDEchoInterval Represents the interval for send echo requests.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.3.10.1.20

For each service policy, it could be bind to several VLANs.
The table describes the relationship between VLAN and
service policies.

hh3cDot11APSTVlanEntry row .1.3.6.1.4.1.25506.2.75.4.3.11.1

Each entry contains VLAN and service policy information for each
specific radio of AP.

Indexes

hh3cDot11SIDAPSerialID hh3cDot11CfgRadioID hh3cDot11CfgServicePolicyID

Column	Syntax	OID
hh3cDot11CfgSTVLANID Represents the VLAN that current Service Policy have bind to.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.75.4.3.11.1.1
hh3cDot11CfgSTNASPortID Represents the NAS Port ID of current Service Policy for each specific radio of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.3.11.1.2
hh3cDot11CfgServiceSetRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.3.11.1.3
hh3cDot11CfgSTNASID Represents the NAS ID of current Service Policy for each specific radio of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.4.3.11.1.4

The table defines the parameters for radio in AP, as per
radio.

hh3cDot11RadioIntfConfigEntry row .1.3.6.1.4.1.25506.2.75.4.4.1.1

Each entry contains information of each radio in AP.

Indexes

hh3cDot11RadioIfIdx

Column	Syntax	OID
hh3cDot11RadioIfIdx Represents the Radio IfIndex of radio in AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.1
hh3cDot11RadioCfgBeaconIntvl Represents the interval for Beacon management frame.	TUSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.2
hh3cDot11RadioCfgDtimIntvl Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.3
hh3cDot11RadioCfgRtsThreshold Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	ByteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.4
hh3cDot11RadioCfgFragThreshold Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.	ByteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.5
hh3cDot11RadioCfgShtRetryThld Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.6
hh3cDot11RadioCfglongRtrThld Represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.7
hh3cDot11RadioCfgMaxRxLifetime Represents the elapsed time. After the time specified by hh3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.	millisecondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.4.4.1.1.8
hh3cDot11RadioCfgType Represents the radio will work with which 802.11 radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioTyper/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an 64 dot11ac 128 dot11gac 256 dot11ax 512 dot11gax	.1.3.6.1.4.1.25506.2.75.4.4.1.1.9
hh3cDot11RadioCfgChannel Represents the channel allocation of radio.	HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeTyper/w	.1.3.6.1.4.1.25506.2.75.4.4.1.1.10
hh3cDot11RadioCfgMaxTxPwrLvl Represents the maximal transmit power scope for AP.	dbmHH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeTyper/w	.1.3.6.1.4.1.25506.2.75.4.4.1.1.11
hh3cDot11RadioCfgPreambleLen Represents whether use long or short preamble for 802.11 MAC frame.	HH3C-DOT11-REF-MIBHh3cDot11PreambleTyper/w Type Values: 1 long 2 short	.1.3.6.1.4.1.25506.2.75.4.4.1.1.12
hh3cDot11RadioCfgWorkMode Represents work mode of the radio.	HH3C-DOT11-REF-MIBHh3cDot11WorkModer/w Type Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.25506.2.75.4.4.1.1.13
hh3cDot11RadioCfgOnly11gEnable Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.4.4.1.1.14
hh3cDot11RadioCfgType2 Represents the radio will work with which 802.11 radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioType2r/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11an 16 dot11gn 32 dot11ac 64 dot11gac 128 dot11ax 256 dot11gax	.1.3.6.1.4.1.25506.2.75.4.4.1.1.15
hh3cDot11RadioCfgRssithresholdCM Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.	dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.4.1.1.16

The table defines the binding information for each radio in AP.

hh3cDot11RadioIntfBindEntry row .1.3.6.1.4.1.25506.2.75.4.4.2.1

Each entry contains the radio interface binding information
in AP.

Indexes

hh3cDot11RadioIfIdx hh3cDot11RadioIntfBindSvcPlcyID

Column	Syntax	OID
hh3cDot11RadioIntfBindSvcPlcyID Represents the ID of each service policy.	HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType	.1.3.6.1.4.1.25506.2.75.4.4.2.1.1
hh3cDot11RadioIntfBindIfIdx Represents the Ifindex of interface which is binded to the radio.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.4.4.2.1.2
hh3cDot11RadioIntfBindRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.4.2.1.3

Table will provide data rate configuration for a specific radio type.

hh3cDot11DataRateConfigEntry row .1.3.6.1.4.1.25506.2.75.4.5.1.1

Each entry of the table will provide data rate configuration for a
specific radio type.

Indexes

hh3cDot11RadioTypeID

Column	Syntax	OID
hh3cDot11RadioTypeID Represents the radio type.	HH3C-DOT11-REF-MIBHh3cDot11RadioType Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an 64 dot11ac 128 dot11gac 256 dot11ax 512 dot11gax	.1.3.6.1.4.1.25506.2.75.4.5.1.1.1
hh3cDot11SupportedRateSet Represents the supported rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.75.4.5.1.1.2
hh3cDot11MandatoryRateSet Represents the mandatory rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.75.4.5.1.1.3
hh3cDot11DisabledRateSet Represents the disabled rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.75.4.5.1.1.4
hh3cDot11SmartRateSet Represents the rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.75.4.5.1.1.5

This table is used to configure WLAN ESS interface.

hh3cDot11WlanEssIfEntry row .1.3.6.1.4.1.25506.2.75.4.6.1.1

Each entry contains the WLAN ESS interface configuration.

Indexes

hh3cDot11WlanEssIfNumber

Column	Syntax	OID
hh3cDot11WlanEssIfNumber This node represents the WLAN ESS interface number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.6.1.1.1
hh3cDot11WlanEssIfIndex This node represents the ifIndex of WLAN-ESS interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.4.6.1.1.2
hh3cDot11WlanEssRowStatus This node represents the WLAN ESS interface row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.4.6.1.1.3