HH3C-COMMON-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
9

hh3cSystemDiagInfoTable

table
.1.3.6.1.4.1.25506.6.13 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cSystemDiagInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-COMMON-SYSTEM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-COMMON-SYSTEM-MIB::hh3cSystemDiagInfoTable' 
This table is used to write diagnosis-information file.
hh3cSystemDiagInfoEntry row .1.3.6.1.4.1.25506.6.13.1
The entry of hh3cSystemDiagInfoTable.
The maximum number of entries of this table is 10.
When creating a new entry if there are already
10 entries in this table, the oldest entry will be
deleted automatically.
Indexes
Column Syntax OID
hh3cSystemDiagInfoIndex
Specifies the index of an entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.6.13.1.1
hh3cSystemDiagInfoFilename
Specifies the name of diagnosis-information file.
When creating a row without this column, the system
will generate a default filename instead.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.6.13.1.2
hh3cSystemDiagInfoRowStatus
The row status of this entry.
Only active, createAndGo, and destroy are supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.6.13.1.3
hh3cSystemDiagInfoOperEndTime
The time when this operation was completed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.25506.6.13.1.4
hh3cSystemDiagInfoOperState
The state of this operation.
If the state of this operation is opFailure, the detailed
information can be read by hh3cSystemDiagInfoOperFailReason.
Enumeration
Enumerated Values:
1opInProgress
2opSuccess
3opFailure
 .1.3.6.1.4.1.25506.6.13.1.5
hh3cSystemDiagInfoOperFailReason
The failure reasons of this operation.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.6.13.1.6

hh3cSystemWorkingModeTable

table
.1.3.6.1.4.1.25506.6.14.1 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cSystemWorkingModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-COMMON-SYSTEM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-COMMON-SYSTEM-MIB::hh3cSystemWorkingModeTable' 
This table is used to show the system operating mode information.
The supported features and the specifications of the
supported features vary by system operating mode.
The mode will take effect on the entire device.
hh3cSystemWorkingModeEntry row .1.3.6.1.4.1.25506.6.14.1.1
The entry of hh3cSystemtemWorkingModeTable.
Indexes
Column Syntax OID
hh3cSystemWorkingModeIndex
The unique index of hh3cSystemWorkingModeTable.
The value should be a a small-incremental integer.
An index value uniquely identifies a system operating mode.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.6.14.1.1.1
hh3cSystemWorkingModeName
The name that uniquely identifies the system operating mode.
The value should not contain blank spaces.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.25506.6.14.1.1.2
hh3cSystemWorkingModeDescr
Description of the system operating mode.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.25506.6.14.1.1.3