HH3C-ACFP-MIB Table View

This table contains the basic information about ACFP client.

hh3cAcfpClientInfoEntry row .1.3.6.1.4.1.25506.2.74.1.1.2.1.1

This list contains the basic information about ACFP client.

Indexes

hh3cAcfpClientID

Column	Syntax	OID
hh3cAcfpClientID The identifier of ACFP client.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.1
hh3cAcfpClientDescription Description of the application that is running on ACFP client, eg. IPS, VCX.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.2
hh3cAcfpClientHwVersion The hardware revision of ACFP client.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.3
hh3cAcfpClientOSVersion The operating system version running ACFP client.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.4
hh3cAcfpClientAppVersion The application version running on ACFP client	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.5
hh3cAcfpClientIP IP address of ACFP client.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.6
hh3cAcfpClientMode ACFP client informs Router or switch which mode it is operating. Router or switch checks hh3cAcfpServerInfo to see whether it is capable of fulfilling this function. If not, router or switch generates a trap informing …	Bitsr/w Enumerated Values: 0 ipserver 1 redirect 2 mirror 3 passThrough	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.7
hh3cAcfpClientRowStatus RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: Node hh3cAcfpClientMode must be bound while creating a row. It is optional for other nodes. ACFP module must be enabled for…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.74.1.1.2.1.1.8

This table lists all current policies for ACFP
client(s).  Entries in this table are created or removed
implicitly when entries in the hh3cAcfpRuleTable are
created or removed, respectively.  A policy entry in this
table only exists as long as there is rule of this policy
in the hh3cAcfpRuleTable.  The table serves for listing the
existing policies and their remaining lifetimes and for
changing lifetimes of policies and implicitly of all policy
members and all their member policy rules can be
deleted by setting hh3cAcfpPolicyLifetime to 0.

hh3cAcfpPolicyEntry row .1.3.6.1.4.1.25506.2.74.1.1.3.1.1

The list contains basic information of ACFP Policy.

Indexes

hh3cAcfpClientID hh3cAcfpPolicyIndex

Column	Syntax	OID
hh3cAcfpPolicyIndex The identifier of the Policy of ACFP client	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.1
hh3cAcfpPolicyInIfIndex Packet is received from this interface. The value of this object contains the same value of ifIndex of ifTable.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.2
hh3cAcfpPolicyOutIfIndex Packet is sent to this interface. The value of this object contains the same value of ifIndex of ifTable.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.3
hh3cAcfpPolicyDestIfIndex Through this interface, packet go to ACFP client from ACFP server. The value of this object contains the same value of ifIndex of ifTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.4
hh3cAcfpPolicyContextID Internal id ACFP server allocated used to map to the interface. ACFP server may send packet with this hh3cAcfpPolicyContextID to ACFP client, ACFP client can make use of this hh3cAcfpPolicyContextID and find the policy.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.5
hh3cAcfpPolicyAdminStatus The value of this object indicates the desired status of the policy.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.6
hh3cAcfpPolicyLifetime When retrieved, this object delivers the maximum lifetime (seconds) of all the rules of this, i.e., of all the rows in hh3cAcfpRuleTable that have the same values of hh3cAcfpRulePolicyIndex and hh3cAcfpClientID. Succes…	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.7
hh3cAcfpPolicyTimeStart Beginning time of this policy every day. Eg. HH:MM:SS	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.8
hh3cAcfpPolicyTimeEnd Ending time of this policy every day. Eg. HH:MM:SS	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.9
hh3cAcfpPolicyRowStatus RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: The client corresponding to the index hh3cAcfpClientID must exist while creating a row. Nodes hh3cAcfpPolicyTimeStart and h…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.10
hh3cAcfpPolicyDestIfFailAction The value of this object indicates the action of the policy when the destination interface failed.	Enumerationr/w Enumerated Values: 1 delete 2 reserve	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.11
hh3cAcfpPolicyPriority The value of this object indicates the priority of the policy. Priority8 is maximal priority. Priority1 is minimal priority.	Enumerationr/w Enumerated Values: 1 priority1 2 priority2 3 priority3 4 priority4 5 priority5 6 priority6 7 priority7 8 priority8	.1.3.6.1.4.1.25506.2.74.1.1.3.1.1.12

This table lists all the rules.  It is indexed by
hh3cAcfpClientID, hh3cAcfpRulePolicyIndex and hh3cAcfpRuleIndex.
Entries can be deleted by writing hh3cAcfpPolicyLifetime to 0.

hh3cAcfpRuleEntry row .1.3.6.1.4.1.25506.2.74.1.1.4.1.1

The list contains basic information of the rule.

Indexes

hh3cAcfpClientID hh3cAcfpPolicyIndex hh3cAcfpRuleIndex

Column	Syntax	OID
hh3cAcfpRuleIndex The identifier of the rules which have the same hh3cAcfpPolicyIndex and hh3cAcfpClientID.hh3cAcfpRuleIndex indicates rule sequence in the same policy.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.1
hh3cAcfpRuleOperStatus The value of this object indicates the status of a rule. success : Applied rule to interface successfully. fail : Failed to apply rule to interface.	Enumeration Enumerated Values: 1 success 2 fail	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.2
hh3cAcfpRuleAction The action of this rule.	Enumerationr/w Enumerated Values: 1 permit 2 deny 3 redirect 4 mirror 5 rate	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.3
hh3cAcfpRuleAll The rule match all packet or does not. true : all false : not all	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.4
hh3cAcfpRuleSrcMAC Source MAC of this rule.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.5
hh3cAcfpRuleDstMAC Destination MAC of this rule.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.6
hh3cAcfpRuleVlanStart Starting VLAN id of this rule. 0 : Invalid value	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.7
hh3cAcfpRuleVlanEnd Ending VLAN id of this rule. 0 : Invalid value	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.8
hh3cAcfpRuleProtocol The protocol-type of this rule. <0-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Management Protocol(2) ip Any IP protocol(0) ipinip IP in IP tu…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.9
hh3cAcfpRuleSrcIP Source IP address of this rule.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.10
hh3cAcfpRuleSrcIPMask Source IP-address wild of this rule. Eg. 0.0.0.255.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.11
hh3cAcfpRuleSrcOp Source Port operation for this rule	Enumerationr/w Enumerated Values: 1 equal 2 notEqual 3 lessThan 4 greaterThan 5 range 6 invalid	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.12
hh3cAcfpRuleSrcStartPort Starting UDP/TCP Source Port number of this rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.13
hh3cAcfpRuleSrcEndPort Ending UDP/TCP Source Port of this rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.14
hh3cAcfpRuleDstIP Destination IP address of this rule.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.15
hh3cAcfpRuleDstIPMask Destination IP-address wild of this rule. Eg. 0.0.0.255	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.16
hh3cAcfpRuleDstOp Destination Port operation for this rule	Enumerationr/w Enumerated Values: 1 equal 2 nonEqual 3 lessThan 4 greaterThan 5 range 6 invalid	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.17
hh3cAcfpRuleDstStartPort Starting UDP/TCP Destination Port number of this rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.18
hh3cAcfpRuleDstEndPort Ending UDP/TCP Destination Port of this rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.19
hh3cAcfpRulePrecedence The value of precedence field in IP header. <255> Invalid value <0-7> value of precedence routine(0) Routine precedence priority(1) Priority precedence immediate(…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.20
hh3cAcfpRuleTos The value of TOS field in IP header. <255> Invalid value <0-15> value of ToS (Type of Service) Normal(0) normal service min-monetary-cost(1) minimum monetary cost max-reli…	Integer32r/w Constraints: range: 255-255 range: 0-15	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.21
hh3cAcfpRuleDscp The value of DSCP. <255> Invalid value <0-63> value of DSCP Be(0) best effort af11(10) assured forwarding 11 service af12(12) assured forward…	Integer32r/w Constraints: range: 255-255 range: 0-63	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.22
hh3cAcfpRuleEstablishdeprecated Establish Flag. Matches the TCP packets with the ACK and/or RST flag, including the TCP packets of these types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.23
hh3cAcfpRuleFragment The flag of matching fragmented packet.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.24
hh3cAcfpRulePacketRate Packet rate (Kbps) of this rule.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.25
hh3cAcfpRuleRowStatus RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: Node hh3cAcfpRuleAction must be bound while creating a line. Nodes hh3cAcfpRuleAll and hh3cAcfpRuleProtocol, hh3cAcfpRuleSr…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.26
hh3cAcfpRuleTCPFlag TCP Flag. <0> don't care for TCP flag to match packets <1-65535> care for TCP flag to match packets, the value is combination of next list. URG_VALID (1 << 13) URG_SET (1 << 5) …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.27
hh3cAcfpRuleSrcIPV6Address Source IPv6 address of this rule.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.28
hh3cAcfpRuleSrcPrefixLen Source IPv6 address prefix length of this rule. Eg. 64.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.29
hh3cAcfpRuleDstIPV6Address Destination IPv6 address of this rule.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.30
hh3cAcfpRuleDstPrefixLen Destination IPv6 address prefix length of this rule. Eg. 64.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.31
hh3cAcfpRuleTrafficType Traffic type of this rule. When retrieved, this object returns a set of bits indicating the traffic type.	Bitsr/w Enumerated Values: 0 unicast 1 multicast 2 broadcast	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.32
hh3cAcfpRuleTypeOrLen The type or length of ethernet packet. For Ethernet II encapsulation, it stands for packet type. For 802.3 encapsulation, it stands for packet length.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.74.1.1.4.1.1.33