H3C-WLAN-FLEXAPP-CFG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
90

h3cWlanModuleConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.1.1 · 1 row entry · 9 columns
Open in standard view 
Administrators must configure module parameters for a module to operate.
h3cWlanModuleConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.1.1.1
Each entry contains module configuration information.
Indexes
h3cWlanAPSerialID h3cWlanModuleID
Column Syntax OID
h3cWlanAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.1
h3cWlanModuleID
This object represents the module ID of a module.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.2
h3cWlanModuleType
This object represents the type of a module.
Enumerationr/w
Enumerated Values:
0none
1ble
2iot
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.3
h3cWlanModuleStatus
This object represents the enabled or disabled status of a module.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.4
h3cWlanModuleReset
When read the value from the node
none: Represents the module has been rebooted and the status of the module is normal.
When write the value to the node
reboot: Represents module rebooting. Other values are not support…
Enumerationr/w
Enumerated Values:
0none
1reboot
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.5
h3cWlanModuleRstFac
When read the value from the node
none: Represents the module has been restored and the status of the module is normal.
When write the value to the node
restore: Represents module restoring. Other values are not suppor…
Enumerationr/w
Enumerated Values:
0none
1restore
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.6
h3cWlanModuleUpWareStatus
This object represents the enabled or disabled status of module auto update.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.7
h3cWlanModuleTxPower
This object represents the packet transmit power.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.8
h3cWlanModuleManualUpdate
This object represents the file path for module firmware updating.
OctetStringr/w .1.3.6.1.4.1.2011.10.2.75.19.1.1.1.9

h3cWlanModuleInfoTable

table
.1.3.6.1.4.1.2011.10.2.75.19.1.2 · 1 row entry · 7 columns
Open in standard view 
The table contains information about each module of an AP.
h3cWlanModuleInfoEntry entry .1.3.6.1.4.1.2011.10.2.75.19.1.2.1
Each entry contains IOT module information.
Indexes
h3cDot11IOTAPSerialID h3cDot11IOTModuleID
Column Syntax OID
h3cDot11IOTAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.1
h3cDot11IOTModuleID
This object represents a module.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.2
h3cDot11IOTModuleType
This object represents the type of a module.
Enumeration
Enumerated Values:
0none
1h3c
2iot
 .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.3
h3cDot11IOTModuleModel
This object represents the model of a module.
OctetString .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.4
h3cDot11IOTModuleHwVersion
This object represents the hardware version of a module.
OctetString .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.5
h3cDot11IOTModuleSwVersion
This object represents the software version of a module.
OctetString .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.6
h3cDot11IOTModuleSerialId
This object represents the sequence ID of a module.
OctetString .1.3.6.1.4.1.2011.10.2.75.19.1.2.1.7

h3cWlanIOTConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.2.1 · 1 row entry · 3 columns
Open in standard view 
Administrators must configure IOT parameters.
h3cWlanIOTConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.2.1.1
Each entry contains module configuration information.
Indexes
h3cWlanIOTAPSerialID
Column Syntax OID
h3cWlanIOTAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.2.1.1.1
h3cWlanIOTEngineAdd
This object represents the IPv4 address of the location server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.75.19.2.1.1.2
h3cWlanIOTEnginePort
This object represents the UDP port to listen for IOT messages from the server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.2.1.1.3

h3cWlanBLEConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.4.1 · 1 row entry · 14 columns
Open in standard view 
Administrators must configure Bluetooth Low Energy (BLE) parameters.
h3cWlanBLEConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.4.1.1
Each entry contains BLE location configuration information.
Indexes
h3cWlanBLEAPSerialID
Column Syntax OID
h3cWlanBLEAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.1
h3cWlanBLEStatus
This object represents the enabled or disabled status of BLE location.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.2
h3cWlanBLEEngineAdd
This object represents the server's IPv4 address to which BLE messages are sent.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.3
h3cWlanBLEEnginePort
This object represents the UDP port of the location server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.4
h3cWlanBLEVendorPort
This object represents the UDP port to listen for BLE messages from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.5
h3cWlanBLERssiStatus
This object represents the enabled or disabled status of BLE RSSI-based packet filtering.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.6
h3cWlanBLERssiThreshold
This object represents the max RSSI value of clients' packets.
Integer32r/w
Constraints:
range: 5-255
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.7
h3cWlanBLEConnectPassword
This object represents the BLE module connection password.
OctetStringr/w
Constraints:
range: 4-4
range: 0-0
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.8
h3cWlanBLECommandPassword
This object represents the BLE module command password.
OctetStringr/w
Constraints:
range: 0-0
range: 12-12
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.9
h3cWlanBLEReportStatus
This object represents the enabled or disabled status of BLE location reporting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.10
h3cWlanBLEReportInterval
This object represents the interval at which an AP sends BLE messages to the server.
SecondInteger32r/w
Constraints:
range: 1-86400
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.11
h3cWlanBLEAgingTime
This object represents the aging time for iBeacon devices.
SecondInteger32r/w
Constraints:
range: 60-3600
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.12
h3cWlanBLERealTimeReportStatus
This object represents the enabled or disabled status of BLE realtime reporting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.13
h3cWlanBLERealTimePrefix
This object represents the manufacturer prefix of BLE devices to
be located. The prefix must be an even number.
OctetStringr/w
Constraints:
range: 0-0
range: 8-18
 .1.3.6.1.4.1.2011.10.2.75.19.4.1.1.14

h3cWlanBLEModuleConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.4.2 · 1 row entry · 7 columns
Open in standard view 
Administrators must configure BLE module parameters.
h3cWlanBLEModuleConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.4.2.1
Each entry contains BLE module configuration information.
Indexes
h3cWlanBLEModuleAPSerialID h3cWlanBLEModuleID
Column Syntax OID
h3cWlanBLEModuleAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.1
h3cWlanBLEModuleID
This object represents the ID of a module.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.2
h3cWlanBLEAdvReportStatus
This object represents the enabled or disabled status of BLE advertisement reporting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.3
h3cWlanBLEAdvReportInterval
This object represents the interval at which a BLE module sends advertisement packets.
SecondInteger32r/w
Constraints:
range: 50-1000
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.4
h3cWlanBLEAdvUUID
This object represents the UUID of BLE advertisement packets.
OctetStringr/w
Constraints:
range: 0-0
range: 32-32
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.5
h3cWlanBLEAdvMajorID
This object represents the major ID of BLE advertisement packets.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.6
h3cWlanBLEAdvMinorID
This object represents the minor ID of BLE advertisement packets.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.4.2.1.7

h3cWlanAEConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.5.1 · 1 row entry · 10 columns
Open in standard view 
Administrators must configure AeroScout (AE) parameters.
h3cWlanAEConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.5.1.1
Each entry contains AE location configuration information.
Indexes
h3cWlanAEAPSerialID
Column Syntax OID
h3cWlanAEAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.1
h3cWlanAEStatus
This object represents the enabled or disabled status of AE location.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.2
h3cWlanAEEngineAddr
This object represents the server's IPv4 address to which AE messages are sent.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.3
h3cWlanAEEnginePort
This object represents the UDP port of the location server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.4
h3cWlanAEVendorPort
This object represents the UDP port to listen for AE messages from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.5
h3cWlanAETimeStamp
This object represents the enabled or disabled status of timestamp.
Enumerationr/w
Enumerated Values:
1absolute
2relative
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.6
h3cWlanAEVersion
This object represents the version of the AE protocol.
Enumerationr/w
Enumerated Values:
2v2
3v3
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.7
h3cWlanAETagMultiAddr
This object represents Tag's multicast MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.8
h3cWlanAEEngineDetection
This object represents the location mode.
Enumerationr/w
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.9
h3cWlanAEReportMode
This object represents the report mode.
Enumerationr/w
Enumerated Values:
1local
2central
 .1.3.6.1.4.1.2011.10.2.75.19.5.1.1.10

h3cWlanAERadioConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.5.2 · 1 row entry · 5 columns
Open in standard view 
Administrators must configure AE parameters.
h3cWlanAERadioConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.5.2.1
Each entry contains AE location configuration information.
Indexes
h3cWlanAERadioAPSerialID h3cWlanAEAPRadioID
Column Syntax OID
h3cWlanAERadioAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.5.2.1.1
h3cWlanAEAPRadioID
This object represents the ID of a radio.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.5.2.1.2
h3cWlanAERadioStatus
This object represents the enabled or disabled status of radio-based location.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.5.2.1.3
h3cWlanAEMUStatus
This object represents the status of MU message reporting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.5.2.1.4
h3cWlanAETagStatus
This object represents the status of Tag message reporting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.5.2.1.5

h3cWlanCommonConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.6.1 · 1 row entry · 14 columns
Open in standard view 
Administrators must configure common parameters.
h3cWlanCommonConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.6.1.1
Each entry contains common configuration information.
Indexes
h3cWlanCommonAPSerialID
Column Syntax OID
h3cWlanCommonAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.1
h3cWlanDilutionStatus
This object represents the enabled or disabled status of packet dilution.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.2
h3cWlanDilutionFactor
This object represents the packet dilution factor.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.3
h3cWlanDilutionTimeout
This object represents the packet dilution timeout.
SecondInteger32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.4
h3cWlanIgnoreBeacon
This object represents the enabled or disabled status of beacon ignoring.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.5
h3cWlanRateLimitStatus
This object represents the enabled or disabled status of location packet rate limiting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.6
h3cWlanRateLimitCir
This object represents the CIR for sending location packets.
KbpsInteger32r/w
Constraints:
range: 0-0
range: 8-1300000
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.7
h3cWlanRateLimitCbs
This object represents the CBS for sending location packets.
BytesInteger32r/w
Constraints:
range: 500-130000000
range: 0-0
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.8
h3cWlanClientRateLimitStatus
This object represents the enabled or disabled status of client packet rate limiting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.9
h3cWlanClientRateLimitCir
This object represents the CIR for receiving client packets.
KbpsInteger32r/w
Constraints:
range: 0-1300000
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.10
h3cWlanClientRateLimitCbs
This object represents the CBS for receiving client packets.
BytesInteger32r/w
Constraints:
range: 0-0
range: 80-130000000
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.11
h3cWlanRssiStatus
This object represents the enabled or disabled status of RSSI-based packet filtering.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.12
h3cWlanRssiThreshold
This object represents the max RSSI value of clients' packets.
Integer32r/w
Constraints:
range: 5-100
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.13
h3cWlanIgnoreApFrame
This object represents the enabled or disabled status of AP packet ignoring.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.6.1.1.14

h3cWlanCUPIDConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.7.1 · 1 row entry · 11 columns
Open in standard view 
Administrators must configure CUPID parameters.
h3cWlanCUPIDConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.7.1.1
Each entry contains CUPID location configuration information.
Indexes
h3cWlanCupidAPSerialID
Column Syntax OID
h3cWlanCupidAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.1
h3cWlanCupidStatus
This object represents the status of CUPID location.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.2
h3cWlanCupidEngineAddr
This object represents the IPv4 address of the CUPID location server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.3
h3cWlanCupidEnginePort
This object represents the UDP port of the CUPID location server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.4
h3cWlanCupidVendorPort
This object represents the UDP port to listen for CUPID messages from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.5
h3cWlanCupidReportStatus
This object represents the status of CUPID location reporting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.6
h3cWlanCupidReportInterval
This object represents the interval for sending CUPID location packets.
SecondInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.7
h3cWlanCupidUnassSta
This object represents the status of unassociated client information
reporting for CUPID location.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.8
h3cWlanCupidUnassMeasureSta
This object represents the status of CUPID location for unassociated clients.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.9
h3cWlanCupidReportMode
This object represents the report mode.
Enumerationr/w
Enumerated Values:
1local
2central
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.10
h3cWlanCUPIDReportFormat
This object represents the report format.
Enumerationr/w
Enumerated Values:
1general
2lightweight
 .1.3.6.1.4.1.2011.10.2.75.19.7.1.1.11

h3cWlanFPConfigTable

table
.1.3.6.1.4.1.2011.10.2.75.19.8.1 · 1 row entry · 10 columns
Open in standard view 
Administrators must configure RF fingerprinting parameters.
h3cWlanFPConfigEntry entry .1.3.6.1.4.1.2011.10.2.75.19.8.1.1
Each entry contains RF fingerprinting configuration information.
Indexes
h3cWlanFPAPSerialID
Column Syntax OID
h3cWlanFPAPSerialID
This object represents the serial ID of an AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.1
h3cWlanFPStatus
This object represents the enabled or disabled status of RF fingerprinting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.2
h3cWlanFPEngineAddr
This object represents the IPv4 address of the RF fingerprinting server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.3
h3cWlanFPEnginePort
This object represents the UDP port of the RF fingerprinting server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.4
h3cWlanFPVendorPort
This object represents the UDP port to listen for RF fingerprinting
packets from the server.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.5
h3cWlanFPRawFrameReport
This object represents the status of raw frame reporting for RF fingerprinting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.6
h3cWlanFPMUReport
This object represents the status of MU information reporting for RF fingerprinting.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.7
h3cWlanFPReportMode
This object represents the report mode.
Enumerationr/w
Enumerated Values:
1local
2central
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.8
h3cWlanFPReportFormat
This object represents the report format.
Enumerationr/w
Enumerated Values:
1general
2lightweight
3cupidhybrid
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.9
h3cWlanFPTagMultiAddr
This object represents Tag's multicast MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.10.2.75.19.8.1.1.10