H3C-SUBNET-VLAN-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
11
h3cSubnetVlanTable
table
.1.3.6.1.4.1.2011.10.2.61.1.2
·
1 row entry
·
6 columns
Uses the h3c variant from
Command help
/opt/observium/mibs/h3c.
Walk h3cSubnetVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-SUBNET-VLAN-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-SUBNET-VLAN-MIB::h3cSubnetVlanTable'
Subnet-based VLAN configuration table.
Subnet-based VLAN configuration entry.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Vlan id.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.61.1.2.1.1 |
||||||||||||||
|
The subnet index value of a row in this table is from zero to
the value of h3cSubnetNumPerVlan subtracting one. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.61.1.2.1.2 |
||||||||||||||
|
There are two kinds of ip address supported by VLAN.
One is IPv4, which is 32 bits. The other is IPv6, which is 128 bits. |
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.2011.10.2.61.1.2.1.3 |
||||||||||||||
|
The ip address of the configured subnet on VLAN, which can be an IPv4
or IPv6. |
INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.2011.10.2.61.1.2.1.4 |
||||||||||||||
|
The net mask of the configured subnet on VLAN, which can be an IPv4 or
IPv6. |
INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.2011.10.2.61.1.2.1.5 |
||||||||||||||
|
The row status of this table.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.2011.10.2.61.1.2.1.6 |
.1.3.6.1.4.1.2011.10.2.61.1.3
·
1 row entry
·
5 columns
Uses the h3c variant from
Command help
/opt/observium/mibs/h3c.
Walk h3cSubnetVlanPortCreateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-SUBNET-VLAN-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-SUBNET-VLAN-MIB::h3cSubnetVlanPortCreateTable'
Subnet-based VLAN port table.
Subnet-based VLAN port creation entry.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The port index.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.61.1.3.1.1 |
||||||||||||
|
The subnet-based VLAN id.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.61.1.3.1.2 |
||||||||||||
|
This value is the same as the value of h3cSubnetVlanPortCreateVlanId index.
All of the subnet information in this port, is described on vlan, whose VLAN id is the value of h3cSubnetVlanPortInfoVlanId. The VLAN id of vla… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.61.1.3.1.3 |
||||||||||||
|
The row status of this table.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.2011.10.2.61.1.3.1.4 |
||||||||||||
|
The subnet VLAN status on the port. The value is active only
when h3cSubnetVlanPortCreateVlanId has the corresponding entry in h3cSubnetVlanTable, the port link type is hybrid, and the VLAN is allowed by the port. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.61.1.3.1.5 |