H3C-QOS-PROFILE-MIB Table View

QoS profile table is used to config the qos profiles.

h3cQoSProfEntry row .1.3.6.1.4.1.2011.10.2.17.1.1.1.1

Indexes

h3cQoSProfIndex

Column	Syntax	OID
h3cQoSProfIndex QoS profile table index.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.1.1.1.1
h3cQoSProfName QoS profile name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.10.2.17.1.1.1.1.2
h3cQoSProfActionNumber Total number of actions of a QoS profile.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.1.1.1.3
h3cQoSProfRowStatus RowStatus,Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.17.1.1.1.1.4

Traffic limit table is used to set the average rate or peak rate of the flow.
IP and Link ACL rules can be applied simultaneously,
IP and User based ACL rules can not be applied simultaneously,
Link and User based ACL rules can not be applied simultaneously.
Unused ones is represented with default values.

h3cQoSTrafficLimitEntry row .1.3.6.1.4.1.2011.10.2.17.1.2.1.1

Indexes

h3cQoSTrafLmtProfIndex h3cQoSTrafLmtActionIndex

Column	Syntax	OID
h3cQoSTrafLmtProfIndex The index of QoS profile which the traffic-limit action belongs to.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.1
h3cQoSTrafLmtActionIndex The index of traffic-limit action.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.2
h3cQoSTrafLmtDirection The direction of traffic-limit action.	H3cQoSDirectionr/w Type Values: 0 invalid 1 input 2 ouput	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.3
h3cQoSTrafLmtUserAclNum The number of user-based acl group.	Integer32r/w Constraints: range: 5000-5999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.4
h3cQoSTrafLmtUserAclRule The subitem of user-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.5
h3cQoSTrafLmtIpAclNum The number of Ip-based acl group.	Integer32r/w Constraints: range: 2000-3999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.6
h3cQoSTrafLmtIpAclRule The subitem of IP-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.7
h3cQoSTrafLmtLinkAclNum The number of Link-based acl group	Integer32r/w Constraints: range: 4000-4999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.8
h3cQoSTrafLmtLinkAclRule The subitem of Link-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.9
h3cQoSTrafLmtTargetRateMbps Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.10
h3cQoSTrafLmtTargetRateKbps Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.	Integer32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.11
h3cQoSTrafLmtPeakRate Peak rate	Integer32r/w Constraints: range: 64-8388608 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.12
h3cQoSTrafLmtCIR Committed Information Rate. unit:kbps.	Integer32r/w Constraints: range: 0-34120000	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.13
h3cQoSTrafLmtCBS Committed Burst Size. unit:byte.	Integer32r/w Constraints: range: 0-1048575	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.14
h3cQoSTrafLmtEBS Excess Burst Size. unit:byte.	Integer32r/w Constraints: range: 0-268435455	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.15
h3cQoSTrafLmtPIR Peak Information Rate. unit:kbps.	Integer32r/w Constraints: range: 0-34120000	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.16
h3cQoSTrafLmtConformLocalPre The local precedence of conformed flow.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.17
h3cQoSTrafLmtConformActionType The action type of conformed flow.	Enumerationr/w Enumerated Values: 0 invalid 1 remark-cos 2 remark-drop-priority 3 remark-cos-drop-priority 4 remark-policed-service 5 remark-dscp	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.18
h3cQoSTrafLmtExceedActionType The action type of non-conformed flow.	Enumerationr/w Enumerated Values: 0 invalid 1 forward 2 drop 3 remarkdscp 4 exceed-cos	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.19
h3cQoSTrafLmtExceedDscp The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for g…	Integer32r/w Constraints: range: 255-255 range: 0-63	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.20
h3cQoSTrafLmtExceedCos The remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.21
h3cQoSTrafLmtRowStatus RowStatus,Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.22
h3cQoSTrafLmtConformCos If the user chooses remark-cos value of the h3cQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.23
h3cQoSTrafLmtConformDscp If the user chooses remark-dscp value of the h3cQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: <0-63> Value of DSCP af11 Specify Assured F…	Integer32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.2011.10.2.17.1.2.1.1.24

Traffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets.
IP and Link ACL rules can be applied simultaneously,
IP and User based ACL rules can not be applied simultaneously,
Link and User based ACL rules can not be applied simultaneously.
Unused ones is represented with default values.
QOS policed service from DSCP mapping table is pre-defined in the h3cDscpMapTable in the H3C-LswQos-MIB.
Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets.
Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority.

h3cQoSTrafficPriorityEntry row .1.3.6.1.4.1.2011.10.2.17.1.2.2.1

Indexes

h3cQoSTrafPrioProfIndex h3cQoSTrafPrioActionIndex

Column	Syntax	OID
h3cQoSTrafPrioProfIndex The index of QoS profile which the traffic-priority action belongs to.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.1
h3cQoSTrafPrioActionIndex The index of traffic-priority action.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.2
h3cQoSTrafPrioDirection The direction of traffic-priority action.	H3cQoSDirectionr/w Type Values: 0 invalid 1 input 2 ouput	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.3
h3cQoSTrafPrioUserAclNum The number of user-based acl group.	Integer32r/w Constraints: range: 5000-5999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.4
h3cQoSTrafPrioUserAclRule The subitem of user-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.5
h3cQoSTrafPrioIpAclNum The number of Ip-based acl group.	Integer32r/w Constraints: range: 2000-3999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.6
h3cQoSTrafPrioIpAclRule The subitem of IP-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.7
h3cQoSTrafPrioLinkAclNum The number of Link-based acl group	Integer32r/w Constraints: range: 4000-4999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.8
h3cQoSTrafPrioLinkAclRule The subitem of Link-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.9
h3cQoSTrafPrioDscp Set new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operatio…	Integer32r/w Constraints: range: 255-255 range: 0-63	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.10
h3cQoSTrafPrioIpPre Set Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned fo…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.11
h3cQoSTrafPrioIpPreFromCos Set Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned f…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.12
h3cQoSTrafPrioCos Set vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation.	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.13
h3cQoSTrafPrioCosFromIpPre Set vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned f…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.14
h3cQoSTrafPrioLocalPre Set local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.15
h3cQoSTrafPrioPolicedServiceType The service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. …	Enumerationr/w Enumerated Values: 0 invalid 2 trust-dscp 3 new-dscp 4 untrusted	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.16
h3cQoSTrafPrioPolicedServiceDscp The service Dscp of policed Priority	Integer32r/w Constraints: range: 255-255 range: 0-63	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.17
h3cQoSTrafPrioPolicedServiceExp The service Exp of policed Priority	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.18
h3cQoSTrafPrioPolicedServiceCos The service cos of policed Priority	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.19
h3cQoSTrafPrioPolicedServiceLoaclPre The service local pre of policed Priority	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.20
h3cQoSTrafPrioPolicedServiceDropPriority The service drop priority of proliced Priority	Integer32r/w Constraints: range: 0-2 range: 255-255	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.21
h3cQoSTrafPrioRowStatus RowStatus,Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.17.1.2.2.1.22

Traffic filter table is used to deny or permit packets.
IP and Link ACL rules can be applied simultaneously,
IP and User based ACL rules can not be applied simultaneously,
Link and User based ACL rules can not be applied simultaneously.
Unused ones is represented with default values.
To deny or permit packets,the ACL rules should be defined in h3cAcl table.
The 'deny' or 'permit' action should be defined with ACL rules.
In this table,a predefined ACL rules can be referenced in a specified QOS profile group.
'Direction' means the ACL rules can be applied to the inbound or outbound packets.

h3cQoSTrafficFilterEntry row .1.3.6.1.4.1.2011.10.2.17.1.2.3.1

Indexes

h3cQoSTrafFilterProfIndex h3cQoSTrafFilterActionIndex

Column	Syntax	OID
h3cQoSTrafFilterProfIndex The index of QoS profile which the traffic-filter action belongs to.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.1
h3cQoSTrafFilterActionIndex The index of traffic-filter action.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.2
h3cQoSTrafFilterDirection The direction of traffic-filter action.	H3cQoSDirectionr/w Type Values: 0 invalid 1 input 2 ouput	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.3
h3cQoSTrafFilterUserAclNum The number of user-based acl group.	Integer32r/w Constraints: range: 5000-5999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.4
h3cQoSTrafFilterUserAclRule The subitem of user-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.5
h3cQoSTrafFilterIpAclNum The number of Ip-based acl group.	Integer32r/w Constraints: range: 2000-3999 range: 0-0	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.6
h3cQoSTrafFilterIpAclRule The subitem of IP-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.7
h3cQoSTrafFilterLinkAclNum The number of Link-based acl group	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.8
h3cQoSTrafFilterLinkAclRule The subitem of Link-based acl rule.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.9
h3cQoSTrafFilterRowStatus RowStatus,Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.17.1.2.3.1.10

Port mapping table is used to apply the qos profile to the port.
If a qos profile is applied to the port,
then the port will have an entry in the table.

h3cQoSProfPortMappingEntry row .1.3.6.1.4.1.2011.10.2.17.1.3.1.1

Indexes

h3cQoSProfPortMappingIfIndex h3cQoSProfPortMappingProfIndex

Column	Syntax	OID
h3cQoSProfPortMappingIfIndex The ifindex which the specified QoS profile group is applied to.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.17.1.3.1.1.1
h3cQoSProfPortMappingProfIndex The index of specified QoS profile group.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.3.1.1.2
h3cQoSProfPortMappingRowStatus RowStatus,Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.17.1.3.1.1.3

Port mapping mode table is used to set mapping mode of the port.
When a qos profile is applied to a port, the profile can have two working ways:
1)The profile is the same for all the users connected to the port;
2)The profile can be different for different users connected to the port;
Port-based mode means the profile is the same for all the users.
User-based mode means the profile is different for different users.
Default value is port-based.

h3cQoSProfPortMappingModeEntry row .1.3.6.1.4.1.2011.10.2.17.1.3.2.1

Indexes

h3cQoSProfPortMappingModeIfIndex

Column	Syntax	OID
h3cQoSProfPortMappingModeIfIndex The ifindex which the QoS profile mapping mode is applied to.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.17.1.3.2.1.1
h3cQoSProfPortMappingMode The QoS profile mapping mode of specifed port.	Enumerationr/w Enumerated Values: 1 user-based 2 port-based	.1.3.6.1.4.1.2011.10.2.17.1.3.2.1.2

Dynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles.
Network managers can allocate different QOS profile groups to different users.
Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects.
Each port can have different groups of users simultaneously connected.
Each group of users can have assiociation with multiple QOS profiles simultaneously.
So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles.
Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects.

h3cQoSProfDynPortMappingEntry row .1.3.6.1.4.1.2011.10.2.17.1.3.3.1

Indexes

h3cQoSProfDynPortMappingIfIndex h3cQoSProfDynPortMappingUserSrcMAC

Column	Syntax	OID
h3cQoSProfDynPortMappingIfIndex if index of the port user profile is applied.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.17.1.3.3.1.1
h3cQoSProfDynPortMappingUserSrcMAC User sourc MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.17.1.3.3.1.2
h3cQoSProfDynPortMappingUserName User name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.10.2.17.1.3.3.1.3
h3cQoSProfDynPortMappingUserIPAddr User IP address	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.10.2.17.1.3.3.1.4
h3cQoSProfDynPortMappingUserVLANID User VLAN ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.17.1.3.3.1.5
h3cQoSProfDynPortMappingUserProfName User profile name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.10.2.17.1.3.3.1.6