H3C-MAC-INFORMATION-MIB

        This MIB file is to provide the definition of the MAC Information
general configuration.  MAC Information feature is used to
make that the changed MAC information in the monitored device is
knowable in remote monitoring device.
    
Source file
H3C-MAC-INFORMATION-MIB
Last revised
Identity
h3cMACInformation
Base OID
1.3.6.1.4.1.2011.10.2.87
Imported Objects
HUAWEI-3COM-OID-MIB h3cCommon
IF-MIB ifIndex
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the h3c MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'H3C-MAC-INFORMATION-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'H3C-MAC-INFORMATION-MIB::h3cMACInformation'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-MAC-INFORMATION-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-MAC-INFORMATION-MIB::h3cMACInformation'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (34)
.1.3.6.1.4.1.2011.10.2.87
.1.3.6.1.4.1.2011.10.2.87.1
.1.3.6.1.4.1.2011.10.2.87.1.1
Enumeration
.1.3.6.1.4.1.2011.10.2.87.1.1.1
Unsigned32
.1.3.6.1.4.1.2011.10.2.87.1.1.2
.1.3.6.1.4.1.2011.10.2.87.1.1.3
.1.3.6.1.4.1.2011.10.2.87.1.1.4
.1.3.6.1.4.1.2011.10.2.87.1.1.5
.1.3.6.1.4.1.2011.10.2.87.1.1.6
Unsigned32
.1.3.6.1.4.1.2011.10.2.87.1.1.7
.1.3.6.1.4.1.2011.10.2.87.1.1.8
.1.3.6.1.4.1.2011.10.2.87.1.2
.1.3.6.1.4.1.2011.10.2.87.1.2.1
.1.3.6.1.4.1.2011.10.2.87.1.2.1.1
Enumeration
.1.3.6.1.4.1.2011.10.2.87.1.2.1.1.1
Enumeration
.1.3.6.1.4.1.2011.10.2.87.1.2.1.1.2
.1.3.6.1.4.1.2011.10.2.87.1.3
.1.3.6.1.4.1.2011.10.2.87.1.3.0
.1.3.6.1.4.1.2011.10.2.87.1.3.2
Unsigned32
.1.3.6.1.4.1.2011.10.2.87.1.3.2.1
.1.3.6.1.4.1.2011.10.2.87.1.3.2.2
OctetString
.1.3.6.1.4.1.2011.10.2.87.1.3.2.3
.1.3.6.1.4.1.2011.10.2.87.1.4
.1.3.6.1.4.1.2011.10.2.87.1.4.0
.1.3.6.1.4.1.2011.10.2.87.1.4.2
.1.3.6.1.4.1.2011.10.2.87.1.4.2.1
Unsigned32
.1.3.6.1.4.1.2011.10.2.87.1.4.2.2
.1.3.6.1.4.1.2011.10.2.87.1.4.2.3
OctetString
.1.3.6.1.4.1.2011.10.2.87.1.4.2.4
.1.3.6.1.4.1.2011.10.2.87.1.4.2.5
Integer32
.1.3.6.1.4.1.2011.10.2.87.1.4.2.6
Integer32
.1.3.6.1.4.1.2011.10.2.87.1.4.2.7
Integer32
.1.3.6.1.4.1.2011.10.2.87.1.4.2.8
.1.3.6.1.4.1.2011.10.2.87.1.4.2.9
Dependencies (8) 4 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Enumeration
trap(1)
syslog(2)
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.4.1.2011.10.2.87.1.3.0.1
When the cached number of MAC address information is reached the
value specified by h3cMACInformationCacheLen, trap is generated
and is sent to the remote monitoring device. The trap is also
generated when the amount of time elapsed since the previous
notification is greater than the interval value specified by
h3cMACInformationcSendInterval and there is at least one cached
MAC address information learnt or removed. The object is valid
only when h3cMACInfomationWorkMode is set to trap(1). When the
h3cMACInfomationWorkMode is set to syslog(2), No trap will be
generated even h3cMACInformationEnabled is set to enabled(1) and
the feature is enabled on interface.
.1.3.6.1.4.1.2011.10.2.87.1.4.0.1
When the cached number of MAC address information is reached the
value specified by h3cMACInformationCacheLen, trap is generated
and is sent to the remote monitoring device. The trap is also
generated when the amount of time elapsed since the previous
notification is greater than the interval value specified by
h3cMACInformationcSendInterval and there is at least one cached
MAC address information learnt or removed. The object is valid
only when h3cMACInfomationWorkMode is set to trap(1). When the
h3cMACInfomationWorkMode is set to syslog(2), No trap will be
generated even h3cMACInformationEnabled is set to enabled(1) and
the feature is enabled on interface.
.1.3.6.1.4.1.2011.10.2.87.1.4.0.2
When the MAC address has been moved to another interface, trap
is generated and is sent to the remote monitoring device.