H3C-HPEOC-MIB Table View

This table implements the management of CLT(Coax Line Terminal)
VLAN.

h3cHPEOCCltVlanManEntry row .1.3.6.1.4.1.2011.10.2.84.1.2.1

The entry of the table h3cHPEOCCltVlanManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cHPEOCCltEthPortType Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug.	Enumerationr/w Enumerated Values: 1 normal 2 debug	.1.3.6.1.4.1.2011.10.2.84.1.2.1.1

This table implements the management of CLT(Coax Line Terminal).

h3cHPEOCCltSysManEntry row .1.3.6.1.4.1.2011.10.2.84.1.3.1

The entry of the table h3cHPEOCCltSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cHPEOCCltDescr Set the description of CLT.	OctetStringr/w Constraints: range: 0-126	.1.3.6.1.4.1.2011.10.2.84.1.3.1.1
h3cHPEOCCltFwVersion EOC firmware version. If the object length is zero, it means the version is unknown.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.10.2.84.1.3.1.2
h3cHPEOCCltLinkState The cable port's link state. The physicaldown(1) state indicates that the CLT is not powered on. The linkdown(2) state indicates that the CLT is powered on, but registers fail. The linkup(3) state indicates that the …	Enumeration Enumerated Values: 1 physicaldown 2 linkdown 3 linkup 4 loopback	.1.3.6.1.4.1.2011.10.2.84.1.3.1.3

This table implements the management of CNUs.

h3cHPEOCCnuSysManEntry row .1.3.6.1.4.1.2011.10.2.84.1.4.1

The entry of the table h3cHPEOCCnuSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cHPEOCCnuBcastControl Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.84.1.4.1.1
h3cHPEOCCnuAnonymStatus Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.84.1.4.1.2
h3cHPEOCCnuMacLimit Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address e…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.1.4.1.3

This table defines the primary parameters of the
cable information.

h3cHPEOCCableInfoEntry row .1.3.6.1.4.1.2011.10.2.84.2.1.1

The entry of the table h3cHPEOCCableInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cHPEOCFECErrors The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.84.2.1.1.1
h3cHPEOCAvgBitsPerCarrier The cable port's average bits per carrier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.2.1.1.2
h3cHPEOCAvgSNRPerCarrier The cable port's signal noise ratio(SNR) bits per carrier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.2.1.1.3
h3cHPEOCAvgInPBCRCErrors The input PB CRC errors on average.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.2.1.1.4
h3cHPEOCInTotalPkts The total number of packets(including bad packets) received on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.84.2.1.1.5
h3cHPEOCAvgOutPower The cable port's power sent on average, the unit is db.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.2.1.1.6
h3cHPEOCAvgOutPBCRCErrors The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.2.1.1.7
h3cHPEOCOutTotalPkts The total count of the packets(including bad packets) sent on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.84.2.1.1.8

This table defines the bits per symbol parameters of the
cable line.

h3cHPEOCBitPerSymbolEntry row .1.3.6.1.4.1.2011.10.2.84.2.2.1

The entry of the table h3cHPEOCBitPerSymbolTable.

Indexes

IF-MIBifIndex h3cHPEOCBitPerSymbolIndex

Column	Syntax	OID
h3cHPEOCBitPerSymbolIndex The index of the h3cHPEOCBitPerSymbolTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.2.2.1.1
h3cHPEOCBitPerSymbol h3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map.	OctetString	.1.3.6.1.4.1.2011.10.2.84.2.2.1.2

This table defines the global parameters of the
Template information.

h3cHPEOCTemplateGlobalEntry row .1.3.6.1.4.1.2011.10.2.84.3.1.1

The entry of the table h3cHPEOCTemplateGlobalTable.

Indexes

h3cHPEOCTemplateIndex

Column	Syntax	OID
h3cHPEOCTemplateIndex The index of cable Template.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.3.1.1.1
h3cHPEOCTemplateType The cable Template's type, can not change after create it.	Enumerationr/w Enumerated Values: 1 switch 2 gateway	.1.3.6.1.4.1.2011.10.2.84.3.1.1.2
h3cHPEOCTemplateName The cable Template's name, it's recommended to set it uniquely and understandably. Length: 1 to 15 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.10.2.84.3.1.1.3
h3cHPEOCTemplateDescr The cable Template's description. Length: 0 to 63 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.10.2.84.3.1.1.4
h3cHPEOCTemplateCnuMaxDownBW Maximum downstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.3.1.1.5
h3cHPEOCTemplateCnuMaxUpBW Maximum upstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.3.1.1.6
h3cHPEOCTemplateCnuBcastControl Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.84.3.1.1.7
h3cHPEOCTemplateCnuMacLimit Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address e…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.3.1.1.8
h3cHPEOCTemplateCb201VlanEn Use for Cb201 cnu only. true(1) - Enable vlan insert function. false(2) - Disable vlan insert function.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.84.3.1.1.9
h3cHPEOCTemplateRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.84.3.1.1.10

This table defines the port parameters of the
switch type cnu. it's not affect on the type of gateway Template.

h3cHPEOCTemplateSwitchEntry row .1.3.6.1.4.1.2011.10.2.84.3.2.1

The entry of the table h3cHPEOCTemplateSwitchTable.

Indexes

h3cHPEOCTemplateIndex h3cHPEOCTemplateUniIndex

Column	Syntax	OID
h3cHPEOCTemplateUniIndex The index value which uniquely identifies the FE interface of the CNU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.3.2.1.1
h3cHPEOCTemplateUniSpeed User network interface speed.	Enumerationr/w Enumerated Values: 1 auto 10 s10M 100 s100M	.1.3.6.1.4.1.2011.10.2.84.3.2.1.2
h3cHPEOCTemplateUniDuplex User network interface mode.	Enumerationr/w Enumerated Values: 1 full 2 half 3 auto	.1.3.6.1.4.1.2011.10.2.84.3.2.1.3
h3cHPEOCTemplateUniPriority The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.10.2.84.3.2.1.4
h3cHPEOCTemplateUniFlowControl Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.84.3.2.1.5
h3cHPEOCTemplateUniUpLineRate The max speed upload in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.3.2.1.6
h3cHPEOCTemplateUniDownLineRate The max speed download in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the download speed is only restricted by the physical line.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.84.3.2.1.7
h3cHPEOCTemplateUniAdminStatus Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.10.2.84.3.2.1.8
h3cHPEOCTemplateUniVLANType port vlan types. hybrid (3) port can carry multiple VLANs.	Enumerationr/w Enumerated Values: 1 access 2 trunk 3 hybrid	.1.3.6.1.4.1.2011.10.2.84.3.2.1.9
h3cHPEOCTemplateUniPvid The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2011.10.2.84.3.2.1.10
h3cHPEOCTemplateUniVlanTag VLAN is set tagged or untagged.	Enumerationr/w Enumerated Values: 1 tagged 2 untagged	.1.3.6.1.4.1.2011.10.2.84.3.2.1.11

This table defines the global parameters of the
cnu type permitting to access.

h3cHPEOCCnuAccessEntry row .1.3.6.1.4.1.2011.10.2.84.4.1.1

The entry of the table h3cHPEOCCnuAccessTable.

Indexes

h3cHPEOCCnuAccessIndex

Column	Syntax	OID
h3cHPEOCCnuAccessIndex The index value which uniquely identifies the manuinfo of the CNU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.4.1.1.1
h3cHPEOCCnuHFID The Cnu's HFID. Every type Cnu has it's unique HFID. Length: 1 to 64 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.10.2.84.4.1.1.2
h3cHPEOCManuInfo The Cnu's manufactory infofamiont. Length: 0 to 63 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.10.2.84.4.1.1.3
h3cHPEOCCnuType The Cnu's function type.	Enumerationr/w Enumerated Values: 1 switch 2 gateway	.1.3.6.1.4.1.2011.10.2.84.4.1.1.4
h3cHPEOCCnuSwitchType The Cnu's switch chip type. It's useless for gataway type cnu.	Enumerationr/w Enumerated Values: 1 rtl8306e 2 ar8236 3 mv6061 4 mv6031	.1.3.6.1.4.1.2011.10.2.84.4.1.1.5
h3cHPEOCCnuUniNum Uni number of the Cnu. It's useless for gataway type cnu.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.84.4.1.1.6
h3cHPEOCCnuPhy2Uni Reflection from phy port to uni port of the cnu. It's useless for gataway type cnu. For example, phy port 0,1,2,3 is reflect to uni port 1,2,3,4, then the value of this mib is {0,1,2,3}	OctetStringr/w	.1.3.6.1.4.1.2011.10.2.84.4.1.1.7
h3cHPEOCCnuAccessRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.84.4.1.1.8