H3C-FCOE-MIB Table View

This table facilitates configuration of FCoE parameters
on a per Fibre Channel management instance.

h3cFCoECfgEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.1.1

There is one entry in this table for each
Fibre Channel management instance.

Indexes

FC-MGMT-MIBfcmInstanceIndex

Column	Syntax	OID
h3cFCoECfgFcmap This object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.2011.10.2.120.1.1.1.1.1
h3cFCoECfgDynamicVfcCreation This object is set to 'true' to enable, or 'false' to disable, the dynamic creation of VFC interfaces on this FCF. When set to 'true', VFC interfaces are dynamically created as and when a FIP-based FLOGI or ELP request …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.120.1.1.1.1.2
h3cFCoECfgDefaultFCFPriority The FIP priority value advertised by the FCF to ENodes by default. h3cFCoEStaticVfcFCFPriority configured for a VFC interface overrides this setting for the ENode associated with the VFC.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.120.1.1.1.1.3
h3cFCoECfgDATov The Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisements.	secondsUnsigned32r/w Constraints: range: 4-600	.1.3.6.1.4.1.2011.10.2.120.1.1.1.1.4
h3cFCoECfgAddressingMode Addressing mode(s) supported by the FCF. Implementations should fail SetRequests for unsupported modes.	Enumerationr/w Enumerated Values: 1 fpma 2 spma 3 fpmaAndSpma	.1.3.6.1.4.1.2011.10.2.120.1.1.1.1.5

In fabrics in which VLANs are deployed, this table facilitates
configuration of VLAN and Virtual Fabric associations in an
FCoE network.  In such fabrics, FCoE forwarding for a fabric
is over a VLAN in a (Layer-2) Ethernet network.  That is,
reachability between the ENode/remote-FCF and an FCF for a
given fabric is determined by the reachability provided by the
Ethernet network on the corresponding VLAN.
An active entry in this table indicates which VLAN is used
to transport FCoE traffic for a particular Virtual Fabric.
If VLANs are not deployed or not enabled, entries in this table
are ignored by the bridge.
Some implementations may allow traffic from only one Virtual
Fabric to be transported over a given VLAN.  Such
implementations should prevent multiple entries with the same
VLAN-ID from being created in this table.
Modifying existing VLAN-Virtual Fabric associations is not
possible.  The specific row must first be deleted and then
a new one created.

h3cFCoEVLANEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.2.1

There is one entry in this table for each VLAN that is
designated to transport FCoE traffic for a given Virtual
Fabric.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEVLANIndex h3cFCoEFabricIndex

Column	Syntax	OID
h3cFCoEVLANIndex This object identifies the VLAN-ID that the FCoE FCF function is being enabled for.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.2011.10.2.120.1.1.2.1.1
h3cFCoEFabricIndex This object identifies the Fabric Index of the Virtual Fabric traffic which is to be transported over the VLAN identified by h3cFCoEVLANIndex.	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.10.2.120.1.1.2.1.2
h3cFCoEVLANOperState Operational state of this VLAN-Virtual Fabric association entry. The 'up' state is achieved when both the Virtual Fabric and VLAN are valid.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.10.2.120.1.1.2.1.3
h3cFCoEVLANRowStatus The status of this conceptual row. The RowStatus becomes active on successful creation of an entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.120.1.1.2.1.4

This table facilitates the creation and deletion of static
VFC interfaces.  While VFCs can be dynamically created based on
FIP FLOGI/ELP requests, operators may want to associate certain
pre-configured policy for a particular ENode or a remote-FCF.
In such cases static VFC creation becomes necessary.  In addition
to being creating, a static VFC also needs to be associated to
an ENode or remote-FCF.  The VFC binding provides such an
association.  The binding does not need to be specified when
the row for a VFC is created, but may be specified later.

h3cFCoEStaticVfcEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.3.1

There is one entry in this table for each statically created
VFC Interface.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEStaticVfcIndex

Column	Syntax	OID
h3cFCoEStaticVfcIndex This index uniquely identifies a static VFC entry in this table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.1
h3cFCoEStaticVfcFCFPriority If this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.2
h3cFCoEStaticVfcBindType The mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type VE_Port.	H3cFCoEVfcBindTyper/w Type Values: 1 interfaceIndex 2 macAddress	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.3
h3cFCoEStaticVfcBindIfIndex This object is applicable only when the local FCF is directly connected to an ENode or remote-FCF over a specific Ethernet interface, in which case this object contains the ifIndex of said Ethernet interface. If the ENo…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.4
h3cFCoEStaticVfcBindMACAddress This object is applicable when the ENode or remote-FCF to which the local FCF is connected is identified by a MAC address. A FIP frame from an ENode or remote-FCF is associated with this VFC only if the source MAC addr…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.5
h3cFCoEStaticVfcIfIndex The ifIndex of this Virtual FC interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.6
h3cFCoEStaticVfcCreationTime The timestamp of this entry's creation time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.7
h3cFCoEStaticVfcFailureCause The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.8
h3cFCoEStaticVfcRowStatus The status of this conceptual row. The RowStatus becomes active on successful creation of a VFC. The VFC does not need to be bound for the row to be active, but the VFC must be bound before becoming operational.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.120.1.1.3.1.9

FCoE provides increased flexibility, but with this flexibility
new challenges arise in assuring highly robust Fabrics.  The FCF
does not have the complete control that a Fibre Channel switch
has.
Ethernet bridges commonly provide a feature called Access Control
Lists (ACLs).  Properly configured ACLs may emulate a point-to-point
link by providing the traffic enforcement previously discussed.
Furthermore, the FIP protocol has been designed to enable Ethernet
bridges to efficiently monitor FIP frames passing through them.  This
data facilitates the automatic configuration of these ACLs.  In
addition, the automatic configuration is possible independent of
any other ACLs that may be in use in the network for other
applications.  And FIP Snooping is to maintain these ACLs.

h3cFCoEFIPSnoopingEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.4.1

There is one entry in this table for each VLAN that is
designated to ensure that only valid FCoE traffic is allowed.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEFIPSnoopingVLANIndex

Column	Syntax	OID
h3cFCoEFIPSnoopingVLANIndex This object identifies the VLAN-ID that the FIP Snooping function is being enabled for.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.2011.10.2.120.1.1.4.1.1
h3cFCoEFIPSnoopingEnable This object is used to enable or disable FIP Snooping on an Ethernet Bridge.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.120.1.1.4.1.2
h3cFCoEFIPSnoopingFcmap This object configures the FC-MAP value associated with the FIP snooping Ethernet Bridge.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.2011.10.2.120.1.1.4.1.3

A table contains FCoE related configurations and information of VLANs.
An entry in this table is created when the corresponding VLAN
is created and FCoE is enabled for the VLAN, as well as deleted when
the VLAN is deleted or FCoE is disabled for the VLAN.
If the switch mode is not FCF-NPV mode, all the operations
on any object in this table result in errors.

h3cFCoEVlanCfgEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.5.1

An entry used for managing the FCoE related configurations of a VLAN.

Indexes

h3cFCoEVLANIndex

Column	Syntax	OID
h3cFCoEVlanCfgFcmap This object configures the FC-MAP value used by the FCF in a VLAN when operating in FPMA mode. If this object is not configured, the default value is 0EFC00h.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.2011.10.2.120.1.1.5.1.1
h3cFCoEVlanCfgFCFPriority The FIP priority value advertised by the FCF in a VLAN to ENodes by default. If this object is not configured, the default value is 128.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.120.1.1.5.1.2
h3cFCoEVlanCfgDATov The Discovery_Advertisement_Timeout value configured for the FCF in a VLAN. This is used as the timeout value in seconds by the FCF in a VLAN to send periodic Discovery Advertisements. If this object is not configured, …	secondsUnsigned32r/w Constraints: range: 4-600	.1.3.6.1.4.1.2011.10.2.120.1.1.5.1.3
h3cFCoEVlanCfgRowStatus Now only three states are supported: createAndGo, active, and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.120.1.1.5.1.4

A table contains the remote FCF information on device.

h3cFCoEFIPSnoopingFCFEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.6.1

Each entry contains information about a FCF for a VLAN.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEFIPSnoopingFCFVLANIndex h3cFCoEFIPSnoopingFCFIfIndex h3cFCoEFIPSnoopingFCFMAC

Column	Syntax	OID
h3cFCoEFIPSnoopingFCFVLANIndex This object identifies the VLAN-ID whose FIP Snooping function gets ready on the FCF.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.2011.10.2.120.1.1.6.1.1
h3cFCoEFIPSnoopingFCFIfIndex This index uniquely identifies an Ethernet interface that connects to the FCF.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.120.1.1.6.1.2
h3cFCoEFIPSnoopingFCFMAC The MAC address of the Ethernet interface on the FCF directly connected to the local device.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.120.1.1.6.1.3
h3cFCoEFIPSnoopingFCFSwitchName The switch name of the FCF.	H3C-FC-TC-MIBH3cFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.2011.10.2.120.1.1.6.1.4
h3cFCoEFIPSnoopingFCFFabricName The fabric name of the FCF.	H3C-FC-TC-MIBH3cFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.2011.10.2.120.1.1.6.1.5
h3cFCoEFIPSnoopingFCFENodeCount The total number of ENodes that log in through this Ethernet port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.120.1.1.6.1.6

A table contains the ENode information on the local device.

h3cFCoEFIPSnoopingENodeEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.7.1

Each entry contains information about an ENode for a VLAN.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEFIPSnoopingENodeVLANIndex h3cFCoEFIPSnoopingENodeIfIndex h3cFCoEFIPSnoopingENodeMAC

Column	Syntax	OID
h3cFCoEFIPSnoopingENodeVLANIndex This object identifies the VLAN-ID whose FIP Snooping function gets ready on the ENode.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.2011.10.2.120.1.1.7.1.1
h3cFCoEFIPSnoopingENodeIfIndex This index uniquely identifies an Ethernet interface that connects to the ENode.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.120.1.1.7.1.2
h3cFCoEFIPSnoopingENodeMAC The MAC address of the ENode.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.120.1.1.7.1.3
h3cFCoEFIPSnoopingENodeName The node name of the ENode.	H3C-FC-TC-MIBH3cFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.2011.10.2.120.1.1.7.1.4

A table contains the virtual N_Port information on the local device.

h3cFCoEFIPSnoopingVNEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.8.1

Each entry contains information about a virtual N_Port.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEFIPSnoopingVNVLANIndex h3cFCoEFIPSnoopingVNENodeIfIndex h3cFCoEFIPSnoopingVNENodeMAC h3cFCoEFIPSnoopingVNFCFMAC h3cFCoEFIPSnoopingVNMAC

Column	Syntax	OID
h3cFCoEFIPSnoopingVNVLANIndex This object identifies the VLAN-ID through which a virtual N_Port logs in to the FCF.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.1
h3cFCoEFIPSnoopingVNENodeIfIndex This index uniquely identifies an Ethernet interface that connects to the ENode.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.2
h3cFCoEFIPSnoopingVNENodeMAC The MAC address of the ENode.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.3
h3cFCoEFIPSnoopingVNFCFMAC The MAC address of the FCF.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.4
h3cFCoEFIPSnoopingVNMAC The MAC address of the virtual N_Port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.5
h3cFCoEFIPSnoopingVNName The port name of the virtual N_Port.	H3C-FC-TC-MIBH3cFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.6
h3cFCoEFIPSnoopingVNFCFIfIndex This index uniquely identifies an Ethernet interface that connects to the FCF.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.120.1.1.8.1.7

A table is used to configure FIP Snooping working mode of the Ethernet
interface on the localdevice.

h3cFCoEFIPSnoopingIfCfgEntry row .1.3.6.1.4.1.2011.10.2.120.1.1.9.1

Each entry contains information about FIP Snooping working mode of the
Ethernet interface.

Indexes

FC-MGMT-MIBfcmInstanceIndex h3cFCoEFIPSnoopingIfCfgIfIndex

Column	Syntax	OID
h3cFCoEFIPSnoopingIfCfgIfIndex This index uniquely identifies an Ethernet interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.120.1.1.9.1.1
h3cFCoEFIPSnoopingIfCfgPortType The FIP Snooping working mode of an Ethernet interface on the local device. The FCF mode means that the Ethernet interface must connect to an FCF. The ENode mode means that the Ethernet interface must connect to an EN…	Enumerationr/w Enumerated Values: 1 fcf 2 enode	.1.3.6.1.4.1.2011.10.2.120.1.1.9.1.2