H3C-EVI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
50

h3cEviIfExtendVlanTable

table
.1.3.6.1.4.1.2011.10.2.132.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviIfExtendVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviIfExtendVlanTable' 
A table that contains extended VLAN entries.  A site
extends extended VLANs to remote sites over an EVI tunnel.
h3cEviIfExtendVlanEntry row .1.3.6.1.4.1.2011.10.2.132.1.2.1.1
Detailed information about each extended VLAN.
Indexes
Column Syntax OID
h3cEviIfExtendVlanIndex
Each VLAN index specifies a VLAN ID in the range of
1 to 4094.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.10.2.132.1.2.1.1.1
h3cEviIfExtendVlanLAV
Local Active VLANs (LAVs), which are active VLANs on the EVI tunnel
interface. The interface can extend only active VLANs to
remote sites.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.2.1.1.2
h3cEviIfExtendVlanRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.2.132.1.2.1.1.3

h3cEviIfVlanMappingTable

table
.1.3.6.1.4.1.2011.10.2.132.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviIfVlanMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviIfVlanMappingTable' 
VLAN mapping table on the interface.
h3cEviIfVlanMappingEntry row .1.3.6.1.4.1.2011.10.2.132.1.2.2.1
Detailed information about each VLAN mapping.
Indexes
Column Syntax OID
h3cEviIfVlanMappingSiteId
Site ID of the interface on which the VLAN mapping is
configured. If '0' is specified, the operation applies
to all sites.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.1
h3cEviIfVlanMappingSrc
Local VLAN ID in the mapping.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.2
h3cEviIfVlanMappingDst
Remote VLAN ID in the mapping.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.3
h3cEviIfVlanMappingRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.4

h3cEviIfAttributeTable

table
.1.3.6.1.4.1.2011.10.2.132.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviIfAttributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviIfAttributeTable' 
A table that contains EVI tunnel attribute entries.
h3cEviIfAttributeEntry row .1.3.6.1.4.1.2011.10.2.132.1.2.3.1
Detailed information about the attributes of each EVI tunnel.
Indexes
Column Syntax OID
h3cEviIfFloodingMode
State of the EVI flooding function. The function is enabled
if the value is set to true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.2.3.1.1
h3cEviIfARPSuppression
State of the ARP flooding suppression function. The
function is enabled if the value is set to true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.2.3.1.2

h3cEviIfFloodingMacTable

table
.1.3.6.1.4.1.2011.10.2.132.1.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviIfFloodingMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviIfFloodingMacTable' 
A table that contains MAC addresses configured
for selective flooding.
h3cEviIfFloodingMacEntry row .1.3.6.1.4.1.2011.10.2.132.1.2.4.1
Detailed information about each MAC address
used for EVI selective flooding.
Indexes
Column Syntax OID
h3cEviIfFloodingMacAddress
MAC address used for EVI selective flooding.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.10.2.132.1.2.4.1.1
h3cEviIfFloodMacVlanIndex
The VLAN that contains the MAC address.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.10.2.132.1.2.4.1.2
h3cEviIfFloodingMacRowStatus
State of the MAC address entry. You can use this
object to create or delete entries. Deleting entries
does not delete this object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.2.132.1.2.4.1.3

h3cEviMacCountTable

table
.1.3.6.1.4.1.2011.10.2.132.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviMacCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviMacCountTable' 
EVI MAC statistics table.  The table contains MAC entry
counts sorted by MAC address types, including local MACs, local
MAC conflicts, remote MACs, and remote MAC conflicts.
h3cEviMacCountEntry row .1.3.6.1.4.1.2011.10.2.132.1.3.1.1
EVI MAC entry counts.
Indexes
Column Syntax OID
h3cEviMacLocalMacs
Number of local MACs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.1
h3cEviMacLocalConflicts
Number of local MACs that conflict with remote
MACs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.2
h3cEviMacRemoteMacs
Number of remote MACs received from remote edge devices.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.3
h3cEviMacRemoteConflicts
Number of remote MACs that conflict with local MACs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.4

h3cEviMacLocalTable

table
.1.3.6.1.4.1.2011.10.2.132.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviMacLocalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviMacLocalTable' 
MAC address table that only contains MAC addresses at
the site.
h3cEviMacLocalEntry row .1.3.6.1.4.1.2011.10.2.132.1.3.2.1
Detailed informaiton about each local MAC entry.
Indexes
Column Syntax OID
h3cEviMacLocalVlan
VLANs that contain the local MACs.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.1
h3cEviMacLocalMacAddr
Local MAC addresses.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.2
h3cEviMacLocalMacType
MAC address types, including: dynamic MACs, static MACs,
and flood MACs (MACs configured for selective flooding).
H3cEviMacType
Type Values:
1other
2dynamic
3static
4flood
 .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.3
h3cEviMacLocalConflict
Whether the MAC conflicts with any remote MAC.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.4
h3cEviMacLocalFiltered
Whether the MAC is filtered.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.5

h3cEviMacRemoteTable

table
.1.3.6.1.4.1.2011.10.2.132.1.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviMacRemoteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviMacRemoteTable' 
A table contains MAC addresses received from remote edge devices.
h3cEviMacRemoteEntry row .1.3.6.1.4.1.2011.10.2.132.1.3.3.1
Detailed information about each remote MAC.
Indexes
Column Syntax OID
h3cEviMacRemoteVlan
VLANs that contain remote MAC addresses.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.1
h3cEviMacRemoteMacAddr
Remote MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.2
h3cEviMacRemoteMacEffect
Whether the MAC can be used for forwarding traffic.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.3
h3cEviMacRemoteConflict
The remote MAC conflicts with a local MAC.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.4

h3cEviProcessPolicyTable

table
.1.3.6.1.4.1.2011.10.2.132.1.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviProcessPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviProcessPolicyTable' 
A table that contains routing policy information for each
EVI IS-IS process.
h3cEviProcessPolicyEntry row .1.3.6.1.4.1.2011.10.2.132.1.4.1.1
Detailed information about the routing policy for each
EVI IS-IS process.
Indexes
Column Syntax OID
h3cEviProcessId
EVI IS-IS process ID.
Unsigned32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.2011.10.2.132.1.4.1.1.1
h3cEviProcessPolicy
Routing policy for the EVI IS-IS process.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.10.2.132.1.4.1.1.2

h3cEviProcessGrTable

table
.1.3.6.1.4.1.2011.10.2.132.1.4.2 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviProcessGrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviProcessGrTable' 
A table that contains graceful restart (GR) information.
h3cEviProcessGrEntry row .1.3.6.1.4.1.2011.10.2.132.1.4.2.1
Detailed GR information for each EVI IS-IS process.
Indexes
Column Syntax OID
h3cEviProcessGrEnable
Whether the GR function is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.4.2.1.1
h3cEviProcessGrInterval
EVI IS-IS GR interval in the range of 30 to 1800, in
seconds.
Unsigned32r/w
Constraints:
range: 30-1800
 .1.3.6.1.4.1.2011.10.2.132.1.4.2.1.2

h3cEviProcessVSysTable

table
.1.3.6.1.4.1.2011.10.2.132.1.4.3 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviProcessVSysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviProcessVSysTable' 
A table that contains virtual system entries.  Virtual systems are
associated with EVI IS-IS processes.
h3cEviProcessVSysEntry row .1.3.6.1.4.1.2011.10.2.132.1.4.3.1
Detailed information about each vitual system.
Indexes
Column Syntax OID
h3cEviVirtualSysId
Virtual system ID in hexadecimal notation. The virtual
system ID must be unique in the EVI network.
ISIS-MIBIsisSystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.10.2.132.1.4.3.1.1
h3cEviVirtualSysRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.2.132.1.4.3.1.2

h3cEviISISNbrSummaryTable

table
.1.3.6.1.4.1.2011.10.2.132.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviISISNbrSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviISISNbrSummaryTable' 
EVI neighbor statistics table.
h3cEviISISNbrSummaryEntry row .1.3.6.1.4.1.2011.10.2.132.1.5.1.1
EVI neighbor statistics table entries. The entries
contain the EVI neighbor summary for each EVI IS-IS
process.
Indexes
Column Syntax OID
h3cEviISISNbrMaxMultiHomes
The maximum number of edge devices that the site
can contain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.5.1.1.1
h3cEviISISNbrSiteNbrs
The count of neighbors that belong to the same site.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.5.1.1.2
h3cEviISISNbrLinkNbrs
The count of neighbors that are in remote sites.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.132.1.5.1.1.3

h3cEviISISNbrTable

table
.1.3.6.1.4.1.2011.10.2.132.1.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviISISNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviISISNbrTable' 
A table that contains generic information about all
neighbors.
h3cEviISISNbrEntry row .1.3.6.1.4.1.2011.10.2.132.1.5.2.1
Detailed information about each neighbor of the edge
device.
Indexes
Column Syntax OID
h3cEviISISNbrSysId
System ID of the neighbor.
ISIS-MIBIsisSystemID
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.1
h3cEviISISNbrMacAddr
MAC address of the neighbor.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.2
h3cEviISISNbrSiteId
Site ID of the neighbor.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.3
h3cEviISISNbrTransStatus
State of EVI transport-facing links.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.4

h3cEviEnableTable

table
.1.3.6.1.4.1.2011.10.2.132.1.6.1 · 1 row entry · 1 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviEnableTable' 
A table that contains all EVI-enabled neighboring ports of the edge device.
h3cEviEnableEntry row .1.3.6.1.4.1.2011.10.2.132.1.6.1.1
Detailed information about each EVI-enabled port in the EVI
network.
Indexes
Column Syntax OID
h3cEviEnableStatus
End station service disable (trunk port) bit. When this bit
is set (true), all native frames received on the port and all
native frames that would have been sent on the port are
discarded.

The value of t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.6.1.1.1

h3cEviNbrBaseTable

table
.1.3.6.1.4.1.2011.10.2.132.1.7.1 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviNbrBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviNbrBaseTable' 
A table that contains basic information about the EVI
Neighbor Discovery Protocol (ENDP).
h3cEviNbrBaseEntry row .1.3.6.1.4.1.2011.10.2.132.1.7.1.1
Detailed information about ENDP for each EVI tunnel.
Indexes
Column Syntax OID
h3cEviNbrSelfServerStatus
If the value is set to true, the EVI neighbor
discovery server (ENDS) is enabled. When you
enable ENDS on an EVI tunnel interface, an
EVI neighbor discovery client (ENDC) on the EVI tunnel
interface is also enabled aut…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.132.1.7.1.1.1
h3cEviNbrAuthPassword
ENDP authentication key. It is a zero-length string when being read.
OctetStringr/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.2011.10.2.132.1.7.1.1.2
h3cEviNbrClientRegisterInterval
Interval at which the ENDCs on an EVI tunnel interface
update their registration with their ENDSs.
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.2011.10.2.132.1.7.1.1.3

h3cEviNbrRemoteServerTable

table
.1.3.6.1.4.1.2011.10.2.132.1.7.2 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviNbrRemoteServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviNbrRemoteServerTable' 
A table that contains basic information about the
remote ENDSs.
h3cEviNbrRemoteServerEntry row .1.3.6.1.4.1.2011.10.2.132.1.7.2.1
Detailed information about each remote ENDS. When you set
the address of a remote ENDS on an EVI tunnel interface,
an ENDC is enabled automatically on the EVI tunnel interface.
Indexes
Column Syntax OID
h3cEviNbrRemoteServerType
Address type of the remote ENDS, including ipv4 and ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.132.1.7.2.1.1
h3cEviNbrRemoteServer
Address of the remote ENDS. The address type is
specified by the h3cEviNbrRemoteServerType object.
Address length (4 or 16 bytes) must be consistent with
the address type.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.132.1.7.2.1.2
h3cEviNbrRemoteServerRowStatus
Entry status. This object is used to create or delete
entries. Deleting entries does not delete this object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.2.132.1.7.2.1.3

h3cEviNbrTable

table
.1.3.6.1.4.1.2011.10.2.132.1.7.3 · 1 row entry · 5 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cEviNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-EVI-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-EVI-MIB::h3cEviNbrTable' 
A table that contains basic information about neighbors
discovered with ENDP.
h3cEviNbrEntry row .1.3.6.1.4.1.2011.10.2.132.1.7.3.1
Detailed information about each EVI neighbor.
Indexes
Column Syntax OID
h3cEviNbrAddressType
Address type of the neighbor, including ipv4 and ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.1
h3cEviNbrAddress
Address of the neighbor. The address type is specified by the
h3cEviNbrAddressType object. Address length (4 or 16 bytes)
must be consistent with the address type.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.2
h3cEviNbrSystemID
System ID of the neighbor.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.3
h3cEviNbrExpireTime
Expiration time of the neighbor.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.4
h3cEviNbrStatus
State of the neighbor.
H3cEviNeighborStatus
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.5