H3C-DOT11-WM2U-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
36
.1.3.6.1.4.1.2011.10.2.75.16.1.1 · 1 row entry · 3 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2USrvTempStatesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2USrvTempStatesTable'
The table contains the enable status of WM2U in service templates.
h3cDot11WM2USrvTempStatesEntry row .1.3.6.1.4.1.2011.10.2.75.16.1.1.1
Each entry contains the enable status of WM2U in a service template.
Column Syntax OID
Represents the name of the service template.
OctetString
Constraints:
range: 1-63
.1.3.6.1.4.1.2011.10.2.75.16.1.1.1.1
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.1.1.1.2
The enable status of WM2U.
H3cDot11WM2UEnableStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.10.2.75.16.1.1.1.3
.1.3.6.1.4.1.2011.10.2.75.16.1.2 · 1 row entry · 3 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2UAgingTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2UAgingTimeTable'
The table contains WM2U entry aging information.
h3cDot11WM2UAgingTimeEntry row .1.3.6.1.4.1.2011.10.2.75.16.1.2.1
Each entry contains the aging time for an address type.
Column Syntax OID
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.1.2.1.1
Represents the aging time.
secondsUnsigned32r/w
Constraints:
range: 60-3600
.1.3.6.1.4.1.2011.10.2.75.16.1.2.1.2
The configuration status of the aging time.
H3cDot11WM2UEnableStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.10.2.75.16.1.2.1.3
.1.3.6.1.4.1.2011.10.2.75.16.1.3 · 1 row entry · 3 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2UClientEtyLmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2UClientEtyLmtTable'
The table contains the WM2U entry limit for each client.
h3cDot11WM2UClientEtyLmtEntry row .1.3.6.1.4.1.2011.10.2.75.16.1.3.1
Each entry contains the WM2U entry limit for each client of an
address type.
Column Syntax OID
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.1.3.1.1
Maximum number of WM2U entries for each client of the address type.
Unsigned32r/w
Constraints:
range: 8-1024
.1.3.6.1.4.1.2011.10.2.75.16.1.3.1.2
The enable status of the per-client WM2U entry limit.
H3cDot11WM2UEnableStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.10.2.75.16.1.3.1.3
.1.3.6.1.4.1.2011.10.2.75.16.1.4 · 1 row entry · 3 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2UGlobalEtyLmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2UGlobalEtyLmtTable'
The table contains the WM2U table size.
h3cDot11WM2UGlobalEtyLmtEntry row .1.3.6.1.4.1.2011.10.2.75.16.1.4.1
Each entry contains the WM2U table size for an address type.
Column Syntax OID
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.1.4.1.1
WM2U table size(The maximum number of entries that the WM2U table
can contain).
Unsigned32r/w
Constraints:
range: 8-8192
.1.3.6.1.4.1.2011.10.2.75.16.1.4.1.2
The enable status of the WM2U table size setting.
H3cDot11WM2UEnableStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.10.2.75.16.1.4.1.3
.1.3.6.1.4.1.2011.10.2.75.16.1.5 · 1 row entry · 4 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2UFwdClientLmtsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2UFwdClientLmtsTable'
The table contains the limit on the number of clients of each address
type in the WM2U table.
h3cDot11WM2UFwdClientLmtsEntry row .1.3.6.1.4.1.2011.10.2.75.16.1.5.1
Each entry contains the limit on the number of clients of an address
type in the WM2U table.
Column Syntax OID
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.1.5.1.1
Limit on the number of clients of the address type.
Unsigned32r/w
Constraints:
range: 1-256
.1.3.6.1.4.1.2011.10.2.75.16.1.5.1.2
Action to take when the number of clients exceeds the limit.
H3cDot11WM2UActionr/w
Type Values:
1drop
2unicast
3multicast
.1.3.6.1.4.1.2011.10.2.75.16.1.5.1.3
The enable status of the client limit.
H3cDot11WM2UEnableStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.10.2.75.16.1.5.1.4
.1.3.6.1.4.1.2011.10.2.75.16.1.6 · 1 row entry · 4 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2URateLimitsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2URateLimitsTable'
The table contains multicast packet rate limit information.
h3cDot11WM2URateLimitsEntry row .1.3.6.1.4.1.2011.10.2.75.16.1.6.1
Each entry contains the packet rate limit for an address type.
Column Syntax OID
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.1.6.1.1
Interval for calculating the incoming multicast packet rate,
unit for seconds.
secondsUnsigned32r/w
Constraints:
range: 60-3600
.1.3.6.1.4.1.2011.10.2.75.16.1.6.1.2
Threshold on the number of multicast packets received over the
specified interval.
Unsigned32r/w
Constraints:
range: 1-100000
.1.3.6.1.4.1.2011.10.2.75.16.1.6.1.3
The enable status of IGMP packet rate limiting.
H3cDot11WM2UEnableStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.10.2.75.16.1.6.1.4
.1.3.6.1.4.1.2011.10.2.75.16.2.1 · 1 row entry · 4 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2UClientsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2UClientsTable'
The table contains WM2U client information.
h3cDot11WM2UClientsEntry row .1.3.6.1.4.1.2011.10.2.75.16.2.1.1
Each entry contains information about a client.
Column Syntax OID
Client MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.10.2.75.16.2.1.1.1
The amount of time that has elapsed since the client was discovered.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.16.2.1.1.2
The number of IGMP multicast groups that the client has joined.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.16.2.1.1.3
The number of MLD multicast groups that the client has joined.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.16.2.1.1.4
.1.3.6.1.4.1.2011.10.2.75.16.2.2 · 1 row entry · 7 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2UGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2UGroupsTable'
The table contains WM2U group information.
h3cDot11WM2UGroupsEntry row .1.3.6.1.4.1.2011.10.2.75.16.2.2.1
Each entry contains information about each group.
Column Syntax OID
Client MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.1
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.2
Multicast group address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.3
The version of the group.
H3cDot11WM2UGroupVersion
Type Values:
1igmpv1orv2
2igmpv3
3mldv1
4mldv2
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.4
The source filtering mode of the group.
H3cDot11WM2UGroupMode
Type Values:
1include
2exclude
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.5
The number of multicast sources.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.6
The amount of time that has elapsed since the multicast group
entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.16.2.2.1.7
.1.3.6.1.4.1.2011.10.2.75.16.2.3 · 1 row entry · 5 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11WM2USourcesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-WM2U-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-WM2U-MIB::h3cDot11WM2USourcesTable'
The table contains WM2U source information.
h3cDot11WM2USourcesEntry row .1.3.6.1.4.1.2011.10.2.75.16.2.3.1
Each entry contains information about a multicast source.
Column Syntax OID
Client MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.10.2.75.16.2.3.1.1
Represents the address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2011.10.2.75.16.2.3.1.2
Multicast group address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2011.10.2.75.16.2.3.1.3
Source address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2011.10.2.75.16.2.3.1.4
The amount of time that has elapsed since the source was added
to the multicast group.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.16.2.3.1.5