H3C-DISK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
14

h3cDiskTable

table
.1.3.6.1.4.1.2011.10.10.3.1.1 · 1 row entry · 14 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDiskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DISK-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DISK-MIB::h3cDiskTable'
This table contains some entity extend information of the disk.
h3cDiskEntry row .1.3.6.1.4.1.2011.10.10.3.1.1.1
An entry containing management information applicable to the disk.
Indexes
Column Syntax OID
This object identifies the entity index of disk. The object
identified by this index is the same object as identified by the
same value of entPhysicalIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.10.3.1.1.1.1
This object describes the interface type of disk.
The value 'sata' means serial advanced technology attachment.
The value 'pata' means parallel advanced technology attachment.
The value 'sas' means serial attached SCSI.…
Enumeration
Enumerated Values:
1sata
2pata
3sas
4scsi
5ieee1394
6fcal
.1.3.6.1.4.1.2011.10.10.3.1.1.1.2
This object identifies the speed of disk interface.
The units is million bytes per second.
MB/secondSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.10.3.1.1.1.3
This object describes the size of disk's total space. The units
is million bytes.
MBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.10.3.1.1.1.4
This object describes the size of spare space of the disk. The
units is million bytes.
MBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.10.3.1.1.1.5
This object identifies if the led used to confirm the
position of disk is enable.
H3C-STORAGE-REF-MIBH3cStorageEnableStater/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.2011.10.10.3.1.1.1.6
This object identifies the runing state of the disk.
The value of 'on' means the blue led is on, and the disk works well.
The value of 'blink' means the blue led is blinking, and the disk
is being readed or writed.
The …
Enumeration
Enumerated Values:
1on
2blink
3fastblink
.1.3.6.1.4.1.2011.10.10.3.1.1.1.7
This object identifies the fault state of the disk.
The value of 'off' means the yellow led is go out, and the disk
works well.
The value of 'on' means the yellow led is on, and the disk break
down.
The value of 'blink'…
Enumeration
Enumerated Values:
1off
2on
3blink
.1.3.6.1.4.1.2011.10.10.3.1.1.1.8
The operation of initialize the disk. When the value of this object
is set to 'action', the operation of disk initialize are touched off.
H3C-STORAGE-REF-MIBH3cStorageActionTyper/w
Type Values:
1action
2invalid
.1.3.6.1.4.1.2011.10.10.3.1.1.1.9
This object identifies if the disk is a global hot spare disk.
The value 'globalSpare' means it is a global spare disk, and
the value 'nonglobalSpare' means not.
Enumerationr/w
Enumerated Values:
1globalSpare
2nonglobalSpare
.1.3.6.1.4.1.2011.10.10.3.1.1.1.10
This object identifies if the disk is a specific hot spare disk.
The value 'localSpare' means it is a local spare disk, and
'nonlocalSpare' means not.
Enumeration
Enumerated Values:
1localSpare
2nonlocalSpare
.1.3.6.1.4.1.2011.10.10.3.1.1.1.11
This object identifies the state of read cache.
H3C-STORAGE-REF-MIBH3cStorageEnableStater/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.2011.10.10.3.1.1.1.12
This object identifies the state of write cache.
H3C-STORAGE-REF-MIBH3cStorageEnableStater/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.2011.10.10.3.1.1.1.13
This object describes the reason of disk poweroff.
The value 'environmentUnstable' means disk poweroff and may poweron again.
The value 'mediumError' means disk poweroff and never poweron.
The value 'smartCheckError' me…
Enumeration
Enumerated Values:
1environmentUnstable
2mediumError
3smartCheckError
4generalError
.1.3.6.1.4.1.2011.10.10.3.1.1.1.14