GUDEADS-PDU8340-MIB

Monitored by Observium
        
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Counters Sensors
Explore Observium network monitoring
Source file
GUDEADS-PDU8340-MIB
Last revised
Identity
gudeads
Base OID
1.3.6.1.4.1.28507
Imported Objects
SNMPv2-CONF NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI enterprises Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
Net-SNMP examples using the gude MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'GUDEADS-PDU8340-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GUDEADS-PDU8340-MIB::gudeads'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-PDU8340-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-PDU8340-MIB::gudeads'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (57)
11 directly used by Observium
.1.3.6.1.4.1.28507
.1.3.6.1.4.1.28507.54
.1.3.6.1.4.1.28507.54.1
.1.3.6.1.4.1.28507.54.1.1
.1.3.6.1.4.1.28507.54.1.1.1
Integer32
.1.3.6.1.4.1.28507.54.1.1.1.1
.1.3.6.1.4.1.28507.54.1.1.1.2
.1.3.6.1.4.1.28507.54.1.1.1.2.1
Integer32
.1.3.6.1.4.1.28507.54.1.1.1.2.1.1
OctetString
.1.3.6.1.4.1.28507.54.1.1.1.2.1.2
.1.3.6.1.4.1.28507.54.1.2
.1.3.6.1.4.1.28507.54.1.3
0 = Off, 1 = OnInteger32
.1.3.6.1.4.1.28507.54.1.3.10
.1.3.6.1.4.1.28507.54.1.4
.1.3.6.1.4.1.28507.54.1.5
.1.3.6.1.4.1.28507.54.1.5.1
Unsigned32
.1.3.6.1.4.1.28507.54.1.5.1.1
.1.3.6.1.4.1.28507.54.1.5.1.2
.1.3.6.1.4.1.28507.54.1.5.1.2.1
Integer32
.1.3.6.1.4.1.28507.54.1.5.1.2.1.1
.1.3.6.1.4.1.28507.54.1.5.1.2.1.10
.1.3.6.1.4.1.28507.54.1.5.1.2.1.11
.1.3.6.1.4.1.28507.54.1.5.1.2.1.12
.1.3.6.1.4.1.28507.54.1.5.1.2.1.13
.1.3.6.1.4.1.28507.54.1.5.1.2.1.14
.1.3.6.1.4.1.28507.54.1.5.1.2.1.15
.1.3.6.1.4.1.28507.54.1.5.1.2.1.16
.1.3.6.1.4.1.28507.54.1.5.1.2.1.17
.1.3.6.1.4.1.28507.54.1.5.1.2.1.18
.1.3.6.1.4.1.28507.54.1.5.1.2.1.19
Integer32
.1.3.6.1.4.1.28507.54.1.5.1.2.1.2
.1.3.6.1.4.1.28507.54.1.5.1.2.1.20
.1.3.6.1.4.1.28507.54.1.5.1.2.1.21
.1.3.6.1.4.1.28507.54.1.5.1.2.1.22
.1.3.6.1.4.1.28507.54.1.5.1.2.1.23
.1.3.6.1.4.1.28507.54.1.5.1.2.1.24
.1.3.6.1.4.1.28507.54.1.5.1.2.1.3
.1.3.6.1.4.1.28507.54.1.5.1.2.1.4
pdu8340Current OBS ✓
.1.3.6.1.4.1.28507.54.1.5.1.2.1.5
pdu8340Voltage OBS ✓
.1.3.6.1.4.1.28507.54.1.5.1.2.1.6
.1.3.6.1.4.1.28507.54.1.5.1.2.1.7
.1.3.6.1.4.1.28507.54.1.5.1.2.1.8
.1.3.6.1.4.1.28507.54.1.5.1.2.1.9
.1.3.6.1.4.1.28507.54.1.6
.1.3.6.1.4.1.28507.54.1.6.1
.1.3.6.1.4.1.28507.54.1.6.1.1
Integer32
.1.3.6.1.4.1.28507.54.1.6.1.1.1
0.1 degree CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.28507.54.1.6.1.1.2
0.1 percent humiditySNMPv2-SMIInteger32
.1.3.6.1.4.1.28507.54.1.6.1.1.3
Enumeration
.1.3.6.1.4.1.28507.54.1.6.1.1.4
1 hPA (hectopascal) ~ 1 milibarSNMPv2-SMIInteger32
.1.3.6.1.4.1.28507.54.1.6.1.1.5
0.1 degree CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.28507.54.1.6.1.1.6
0.1 degree CelsiusSNMPv2-SMIInteger32
.1.3.6.1.4.1.28507.54.1.6.1.1.7
.1.3.6.1.4.1.28507.54.2
.1.3.6.1.4.1.28507.54.2.1
.1.3.6.1.4.1.28507.54.2.2
.1.3.6.1.4.1.28507.54.3
Dependencies (2) 2 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. GUDEADS-PDU8340-MIBgudeselected
Notifications / Traps (6)
NameOIDDescription
.1.3.6.1.4.1.28507.54.3.1
temperature limits exceeded
.1.3.6.1.4.1.28507.54.3.2
hygro limits exceeded
.1.3.6.1.4.1.28507.54.3.3
change of logical input sensor state
.1.3.6.1.4.1.28507.54.3.4
Air Pressure limits exceeded
.1.3.6.1.4.1.28507.54.3.5
Dew Point Difference limits exceeded
.1.3.6.1.4.1.28507.54.3.6
Event is triggered when a measured
current is crossing the entered limits