GUDEADS-ENC2302-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
18

enc2302TrapIPTable

table
.1.3.6.1.4.1.28507.70.1.1.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2302TrapIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2302-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2302-MIB::enc2302TrapIPTable' 
list of all Trap receiver
enc2302TrapIPEntry row .1.3.6.1.4.1.28507.70.1.1.1.2.1
an entry containing management
informations regarding the list of trap
receivers
Indexes
Column Syntax OID
enc2302TrapIPIndex
A unique value, greater than zero, for each receiver slot.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.28507.70.1.1.1.2.1.1
enc2302TrapAddr
DNS name or IP address specifying one Trap receiver slot.
A port can optionally be specified: 'name:port' An empty
string disables this slot.
OctetStringr/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.28507.70.1.1.1.2.1.2

enc2302portTable

table
.1.3.6.1.4.1.28507.70.1.3.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2302portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2302-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2302-MIB::enc2302portTable' 
list of all EPC Relay Ports
enc2302portEntry row .1.3.6.1.4.1.28507.70.1.3.1.2.1
An entry containing management information applicable to a
particular relay port.
Indexes
Column Syntax OID
enc2302PortIndex
A unique value, greater than zero, for each Relay Port.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.1
enc2302PortName
A textual string containing name of a Relay Port.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.2
enc2302PortState
current state a Relay Port
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.3
enc2302PortSwitchCount
The total number of switch actions ocurred on a Relay Port.
Does not count switch commands which will not switch
the ralay state, so just real relay switches are displayed here.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.4
enc2302PortStartupMode
set Mode of startup sequence (off, on , remember last state)
Enumerationr/w
Enumerated Values:
0off
1on
2laststate
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.5
enc2302PortStartupDelay
Delay in sec for startup action
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.6
enc2302PortRepowerTime
Delay in sec for repower port after switching off
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.28507.70.1.3.1.2.1.7

enc2302InputTable

table
.1.3.6.1.4.1.28507.70.1.5.6.2 · 1 row entry · 2 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2302InputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2302-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2302-MIB::enc2302InputTable'
enc2302InputEntry row .1.3.6.1.4.1.28507.70.1.5.6.2.1
Indexes
Column Syntax OID
enc2302InputIndex
 Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.28507.70.1.5.6.2.1.1
enc2302Input
Input state of device
Enumeration
Enumerated Values:
0lo
1hi
 .1.3.6.1.4.1.28507.70.1.5.6.2.1.2

enc2302SensorTable

table
.1.3.6.1.4.1.28507.70.1.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2302SensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2302-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2302-MIB::enc2302SensorTable'
enc2302SensorEntry row .1.3.6.1.4.1.28507.70.1.6.1.1
Indexes
Column Syntax OID
enc2302SensorIndex
 Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.28507.70.1.6.1.1.1
enc2302TempSensor
actual temperature
0.1 degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.6.1.1.2
enc2302HygroSensor
actual humidity
0.1 percent humiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.6.1.1.3
enc2302InputSensor
logical state of input sensor
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.28507.70.1.6.1.1.4
enc2302AirPressure
actual air pressure
1 hPA (hectopascal) ~ 1 milibarSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.6.1.1.5
enc2302DewPoint
dew point for actual temperature and humidity
0.1 degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.6.1.1.6
enc2302DewPointDiff
difference between dew point and actual
temperature (Temp - DewPoint)
0.1 degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.70.1.6.1.1.7