GUDEADS-ENC2111-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
18
.1.3.6.1.4.1.28507.60.1.1.1.2 · 1 row entry · 2 columns
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2111TrapIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2111-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2111-MIB::enc2111TrapIPTable'
list of all Trap receiver
enc2111TrapIPEntry row .1.3.6.1.4.1.28507.60.1.1.1.2.1
an entry containing management
informations regarding the list of trap
receivers
Column Syntax OID
A unique value, greater than zero, for each receiver slot.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.28507.60.1.1.1.2.1.1
DNS name or IP address specifying one Trap receiver slot.
A port can optionally be specified: 'name:port' An empty
string disables this slot.
OctetStringr/w
Constraints:
range: 0-99
.1.3.6.1.4.1.28507.60.1.1.1.2.1.2
.1.3.6.1.4.1.28507.60.1.3.1.2 · 1 row entry · 7 columns
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2111portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2111-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2111-MIB::enc2111portTable'
list of all EPC Relay Ports
enc2111portEntry row .1.3.6.1.4.1.28507.60.1.3.1.2.1
An entry containing management information applicable to a
particular relay port.
Column Syntax OID
A unique value, greater than zero, for each Relay Port.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.28507.60.1.3.1.2.1.1
A textual string containing name of a Relay Port.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.28507.60.1.3.1.2.1.2
current state of a Relay Port
Enumerationr/w
Enumerated Values:
0off
1on
.1.3.6.1.4.1.28507.60.1.3.1.2.1.3
The total number of switch actions ocurred on a Relay Port.
Does not count switch commands which will not switch
the ralay state, so just real relay switches are displayed here.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.3.1.2.1.4
set Mode of startup sequence (off, on , remember last state)
Enumerationr/w
Enumerated Values:
0off
1on
2laststate
.1.3.6.1.4.1.28507.60.1.3.1.2.1.5
Delay in sec for startup action
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.3.1.2.1.6
Delay in sec for repower port after switching off
secondsInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.28507.60.1.3.1.2.1.7
.1.3.6.1.4.1.28507.60.1.5.6.2 · 1 row entry · 2 columns
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2111InputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2111-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2111-MIB::enc2111InputTable'
enc2111InputEntry row .1.3.6.1.4.1.28507.60.1.5.6.2.1
Column Syntax OID
Integer32
Constraints:
range: 1-12
.1.3.6.1.4.1.28507.60.1.5.6.2.1.1
Input state of device
Enumeration
Enumerated Values:
0lo
1hi
.1.3.6.1.4.1.28507.60.1.5.6.2.1.2
.1.3.6.1.4.1.28507.60.1.6.1 · 1 row entry · 7 columns
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk enc2111SensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-ENC2111-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-ENC2111-MIB::enc2111SensorTable'
enc2111SensorEntry row .1.3.6.1.4.1.28507.60.1.6.1.1
Column Syntax OID
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.28507.60.1.6.1.1.1
actual temperature
0.1 degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.6.1.1.2
actual humidity
0.1 percent humiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.6.1.1.3
logical state of input sensor
Enumeration
Enumerated Values:
0off
1on
.1.3.6.1.4.1.28507.60.1.6.1.1.4
actual air pressure
1 hPA (hectopascal) ~ 1 milibarSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.6.1.1.5
dew point for actual temperature and humidity
0.1 degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.6.1.1.6
difference between dew point and actual
temperature (Temp - DewPoint)
0.1 degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.28507.60.1.6.1.1.7