GSMP-MIB Table View

This table represents the Switch Controller
Entities. An entry in this table needs to be configured
(created) before a GSMP session might be started.

gsmpControllerEntry row .1.3.6.1.2.1.98.1.1.1

An entry in the table showing
the data for a specific Switch Controller
Entity. If partitions are used, one entity
corresponds to one specific switch partition.
Depending of the encapsulation used,
a corresponding row i…

Indexes

gsmpControllerEntityId

Column	Syntax	OID
gsmpControllerEntityId The Switch Controller Entity Id is unique within the operational context of the device.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.1.1.1
gsmpControllerMaxVersion The max version number of the GSMP protocol being used in this session. The version is negotiated by the adjacency protocol.	GsmpVersionr/w	.1.3.6.1.2.1.98.1.1.1.2
gsmpControllerTimer The timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a GSMP session. The timer is specified in units of 100ms.	100msUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.2.1.98.1.1.1.3
gsmpControllerPort The local port number for the Switch Controller Entity.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.98.1.1.1.4
gsmpControllerInstance The instance number for the Switch Controller Entity. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going do…	Unsigned32 Constraints: range: 1-16777215	.1.3.6.1.2.1.98.1.1.1.5
gsmpControllerPartitionType A controller can request the specific partition identifier to the session by setting the Partition Type to fixedPartitionRequest(2). A controller can let the switch decide whether it wants to assign a fixed partition ID…	GsmpPartitionTyper/w Type Values: 1 noPartition 2 fixedPartitionRequest 3 fixedPartitionAssigned	.1.3.6.1.2.1.98.1.1.1.6
gsmpControllerPartitionId The Id for the specific switch partition that this Switch Controller is concerned with. If partitions are not used or if the controller lets the switch assigns Partition ID, i.e Partition Type = noPartition(1), then thi…	GsmpPartitionIdTyper/w Type Constraints: range: 1	.1.3.6.1.2.1.98.1.1.1.7
gsmpControllerDoResync This object specifies whether the controller should resynchronise or reset in case of loss of synchronisation. If this object is set to true then the Controller should resync with PFLAG=2 (recovered adjacency).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.98.1.1.1.8
gsmpControllerNotificationMap This bitmap defines whether a corresponding SNMP notification should be sent if a GSMP event is received by the Switch Controller. If the bit is set to 1 a notification should be sent. The handling and filtering of the …	Bitsr/w Enumerated Values: 0 sessionDown 1 sessionUp 2 sendFailureIndication 3 receivedFailureIndication 4 portUpEvent 5 portDownEvent 6 invalidLabelEvent 7 newPortEvent 8 deadPortEvent 9 adjacencyUpdateEvent	.1.3.6.1.2.1.98.1.1.1.9
gsmpControllerSessionState The state for the existing or potential session that this entity is concerned with. The NULL state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the session…	Enumeration Enumerated Values: 1 null 2 synsent 3 synrcvd 4 estab	.1.3.6.1.2.1.98.1.1.1.10
gsmpControllerStorageType The storage type for this controller entity. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.98.1.1.1.11
gsmpControllerRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpCont…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.98.1.1.1.12

This table represents the Switch
Entities. An entry in this table needs to be configured
(created) before a GSMP session might be started.

gsmpSwitchEntry row .1.3.6.1.2.1.98.1.2.1

An entry in the table showing
the data for a specific Switch
Entity. If partitions are used, one entity
corresponds to one specific switch partition.
Depending of the encapsulation used,
a corresponding row in the gsmpA…

Indexes

gsmpSwitchEntityId

Column	Syntax	OID
gsmpSwitchEntityId The Switch Entity Id is unique within the operational context of the device.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.2.1.1
gsmpSwitchMaxVersion The max version number of the GSMP protocol being supported by this Switch. The version is negotiated by the adjacency protocol.	GsmpVersionr/w	.1.3.6.1.2.1.98.1.2.1.2
gsmpSwitchTimer The timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a GSMP session. The timer is specified in units of 100ms.	100msUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.2.1.98.1.2.1.3
gsmpSwitchName The name of the Switch. The first three octets must be an Organisationally Unique Identifier (OUI) that identifies the manufacturer of the Switch. This is by default set to the same value as the gsmpSwitchId object if n…	GsmpNameTyper/w Type Constraints: range: 6	.1.3.6.1.2.1.98.1.2.1.4
gsmpSwitchPort The local port number for this Switch Entity.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.98.1.2.1.5
gsmpSwitchInstance The instance number for the Switch Entity. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going down. Zero is…	Unsigned32 Constraints: range: 1-16777215	.1.3.6.1.2.1.98.1.2.1.6
gsmpSwitchPartitionType A switch can assign the specific partition identifier to the session by setting the Partition Type to fixedPartitionAssigned(3). A switch can specify that no partitions are handled in the session by setting the Partitio…	GsmpPartitionTyper/w Type Values: 1 noPartition 2 fixedPartitionRequest 3 fixedPartitionAssigned	.1.3.6.1.2.1.98.1.2.1.7
gsmpSwitchPartitionId The Id for this specific switch partition that the switch entity represents. If partitions are not used, i.e. Partition Type = noPartition(1), then this object is undefined.	GsmpPartitionIdTyper/w Type Constraints: range: 1	.1.3.6.1.2.1.98.1.2.1.8
gsmpSwitchNotificationMap This bitmap defines whether a corresponding SNMP notification should be sent if an GSMP event is sent by the Switch Entity. If the bit is set to 1 a notification should be sent. The handling and filtering of the SNMP no…	Bitsr/w Enumerated Values: 0 sessionDown 1 sessionUp 2 sendFailureIndication 3 receivedFailureIndication 4 portUpEvent 5 portDownEvent 6 invalidLabelEvent 7 newPortEvent 8 deadPortEvent 9 adjacencyUpdateEvent	.1.3.6.1.2.1.98.1.2.1.9
gsmpSwitchSwitchType A 16-bit field allocated by the manufacturer of the switch. The Switch Type identifies the product. When the Switch Type is combined with the OUI from the Switch Name the product is uniquely identified.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.2.1.98.1.2.1.10
gsmpSwitchWindowSize The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. This field is used to prevent request messages from being lost in the switch because of ov…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.98.1.2.1.11
gsmpSwitchSessionState The state for the existing or potential session that this entity is concerned with. The NULL state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the session…	Enumeration Enumerated Values: 1 null 2 synsent 3 synrcvd 4 estab	.1.3.6.1.2.1.98.1.2.1.12
gsmpSwitchStorageType The storage type for this switch entity. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.98.1.2.1.13
gsmpSwitchRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpSwit…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.98.1.2.1.14

This table contains the atm encapsulation data
for the Controller or Switch that uses atm aal5 as
encapsulation.

gsmpAtmEncapEntry row .1.3.6.1.2.1.98.1.3.1

An entry in the table showing
the encapsulation data for a specific
Switch Controller entity or Switch entity.

Indexes

gsmpAtmEncapEntityId

Column	Syntax	OID
gsmpAtmEncapEntityId The Controller Id or Switch Id that is unique within the operational context of the device.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.3.1.1
gsmpAtmEncapIfIndex The interface index for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an ATM data link layer.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.98.1.3.1.2
gsmpAtmEncapVpi The VPI value for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an ATM data link layer.	ATM-TC-MIBAtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.2.1.98.1.3.1.3
gsmpAtmEncapVci The VCI value for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an ATM data link layer.	ATM-TC-MIBAtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.98.1.3.1.4
gsmpAtmEncapStorageType The storage type for this entry. It should have the same value as the StorageType in the referring Switch Controller entity or Switch entity.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.98.1.3.1.5
gsmpAtmEncapRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpAtmE…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.98.1.3.1.6

This table contains the encapsulation data
for the Controller or Switch that uses TCP/IP as
encapsulation.

gsmpTcpIpEncapEntry row .1.3.6.1.2.1.98.1.4.1

An entry in the table showing
the encapsulation data for a specific
Switch Controller entity or Switch entity.

Indexes

gsmpTcpIpEncapEntityId

Column	Syntax	OID
gsmpTcpIpEncapEntityId The Controller or Switch Id is unique within the operational context of the device.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.4.1.1
gsmpTcpIpEncapAddressType The type of address in gsmpTcpIpEncapAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.98.1.4.1.2
gsmpTcpIpEncapAddress The IPv4 or IPv6 address used for the GSMP session peer.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.98.1.4.1.3
gsmpTcpIpEncapPortNumber The TCP port number used for the TCP session establishment to the GSMP peer.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.98.1.4.1.4
gsmpTcpIpEncapStorageType The storage type for this entry. It should have the same value as the StorageType in the referring Switch Controller entity or Switch entity.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.98.1.4.1.5
gsmpTcpIpEncapRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpTcpI…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.98.1.4.1.6

This table represents the sessions between
Controller and Switch pairs.

gsmpSessionEntry row .1.3.6.1.2.1.98.1.5.1

An entry in the table showing
the session data for a specific Controller and
Switch pair. Also, statistics for this specific
session is shown.

Indexes

gsmpSessionThisSideId gsmpSessionFarSideId

Column	Syntax	OID
gsmpSessionThisSideId This side ID uniquely identifies the entity that this session relates to within the operational context of the device.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.5.1.1
gsmpSessionFarSideId The Far side ID uniquely identifies the entity that this session is established against.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.5.1.2
gsmpSessionVersion The version number of the GSMP protocol being used in this session. The version is the result of the negotiation by the adjacency protocol.	GsmpVersion	.1.3.6.1.2.1.98.1.5.1.3
gsmpSessionTimer The timer specifies the time remaining until the adjacency timer expires. The object could take negative values since if no valid GSMP messages are received in any period of time in excess of three times the value of th…	100msSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.98.1.5.1.4
gsmpSessionPartitionId The Partition Id for the specific switch partition that this session is concerned with.	GsmpPartitionIdType Type Constraints: range: 1	.1.3.6.1.2.1.98.1.5.1.5
gsmpSessionAdjacencyCount This object specifies the current number of adjacencies that are established with controllers and the switch partition that is used for this session. The value includes this session.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.2.1.98.1.5.1.6
gsmpSessionFarSideName The name of the far side as advertised in the adjacency message.	GsmpNameType Type Constraints: range: 6	.1.3.6.1.2.1.98.1.5.1.7
gsmpSessionFarSidePort The local port number of the link across which the message is being sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.98.1.5.1.8
gsmpSessionFarSideInstance The instance number used for the link during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes ba…	Unsigned32 Constraints: range: 1-16777215	.1.3.6.1.2.1.98.1.5.1.9
gsmpSessionLastFailureCode This is the last failure code that was received over this session. If no failure code have been received, the value is zero.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.2.1.98.1.5.1.10
gsmpSessionDiscontinuityTime The value of sysUpTime on the most recent occasion at which one or more of this session's counters suffered a discontinuity. If no such discontinuities have occurred since then, this object contains the same timestamp a…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.98.1.5.1.11
gsmpSessionStartUptime The value of sysUpTime when the session came to established state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.98.1.5.1.12
gsmpSessionStatSentMessages The number of messages that have been sent in this session. All GSMP messages pertaining to this session after the session came to established state SHALL be counted, also including adjacency protocol messages and failu…	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.13
gsmpSessionStatFailureInds The number of messages that have been sent with a failure indication in this session. Warning messages SHALL NOT be counted. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indic…	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.14
gsmpSessionStatReceivedMessages The number of messages that have been received in this session. All legal GSMP messages pertaining to this session after the session came to established state SHALL be counted, also including adjacency protocol messages…	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.15
gsmpSessionStatReceivedFailures The number of messages that have been received in this session with a failure indication. Warning messages SHALL NOT be counted. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object i…	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.16
gsmpSessionStatPortUpEvents The number of Port Up events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.17
gsmpSessionStatPortDownEvents The number of Port Down events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.18
gsmpSessionStatInvLabelEvents The number of Invalid label events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.19
gsmpSessionStatNewPortEvents The number of New Port events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.20
gsmpSessionStatDeadPortEvents The number of Dead Port events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.21
gsmpSessionStatAdjUpdateEvents The number of Adjacency Update events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.	RMON2-MIBZeroBasedCounter32	.1.3.6.1.2.1.98.1.5.1.22