GSM7312-SWITCHING-MIB Table View

Agent Trap Log

agentTrapLogEntry row .1.3.6.1.4.1.4526.1.6.1.1.2.4.1

Agent trap log entry

Indexes

agentTrapLogIndex

Column	Syntax	OID
agentTrapLogIndex Unique index of trap entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.1.2.4.1.1
agentTrapLogSystemTime System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.1.6.1.1.2.4.1.2
agentTrapLogTrap Description of the trap sent.	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.4526.1.6.1.1.2.4.1.3

Supported MIB table

agentSupportedMibEntry row .1.3.6.1.4.1.4526.1.6.1.1.3.1

Supported MIB entry

Indexes

agentSupportedMibIndex

Column	Syntax	OID
agentSupportedMibIndex Unique index of the Supported MIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.1.3.1.1
agentSupportedMibName The name of the MIB (RFC or IEEE) that is supported.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.1.6.1.1.3.1.2
agentSupportedMibDescription Description of the MIB (RFC or IEEE) that is supported.	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.4526.1.6.1.1.3.1.3

A table of the switch's login session

agentLoginSessionEntry row .1.3.6.1.4.1.4526.1.6.1.2.1.1.1

Login Session Entry

Indexes

agentLoginSessionIndex

Column	Syntax	OID
agentLoginSessionIndex Agent Login Session Index of the switch	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.1
agentLoginSessionUserName Agent Login Session UserName of the switch	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.2
agentLoginSessionIPAddress Agent Login Session IP Address of the switch	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.3
agentLoginSessionConnectionType Agent Login Session Connection Type of the switch	Enumeration Enumerated Values: 1 serial 2 telnet	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.4
agentLoginSessionIdleTime Agent Login Session Idle Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.5
agentLoginSessionSessionTime Agent Login Session Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.6
agentLoginSessionStatus Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.7

User Config Table

agentUserConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1

User Config Entry

Indexes

agentUserIndex

Column	Syntax	OID
agentUserIndex Agent User Config Index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.1
agentUserName Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.2
agentUserPassword Agent User Password This object will return an empty string even if a password is set.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.3
agentUserAccessMode Agent User Access Mode	Enumeration Enumerated Values: 1 read 2 write	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.4
agentUserStatus Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.5
agentUserAuthenticationType SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) …	Enumerationr/w Enumerated Values: 1 none 2 hmacmd5 3 hmacsha	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.6
agentUserEncryptionType SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used	Enumerationr/w Enumerated Values: 1 none 2 des	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.7
agentUserEncryptionPassword SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty st…	OctetStringr/w Constraints: range: 8-64	.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.8

A summary table of the switch's LAG config entries

agentLagSummaryConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.2.2.1

Switch's LAG config entry

Indexes

agentLagSummaryLagIndex

Column	Syntax	OID
agentLagSummaryLagIndex Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.1
agentLagSummaryName Agent LAG Name. The associated name of the LAG used during creation.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.2
agentLagSummaryFlushTimerobsolete Agent LAG FlushTimer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.3
agentLagSummaryLinkTrap Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.4
agentLagSummaryAdminMode Agent LAG AdminMode. Administratively enables or disables this LAG interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.5
agentLagSummaryStpMode Agent LAG StpMode If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4)	Enumerationr/w Enumerated Values: 1 dot1d 2 fast 3 off 4 dot1s	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.6
agentLagSummaryAddPort Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.7
agentLagSummaryDeletePort Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.8
agentLagSummaryStatus Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.9
agentLagSummaryType Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.10

A detailed table of the switch's LAG config entries

agentLagDetailedConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.2.3.1

Switch's LAG config entry

Indexes

agentLagDetailedLagIndex agentLagDetailedIfIndex

Column	Syntax	OID
agentLagDetailedLagIndex LAG index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.1
agentLagDetailedIfIndex LAG port index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.2
agentLagDetailedPortSpeed LAG port speed. See agentPortType for a description and list of valid values.	ObjectIdentifier	.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.3
agentLagDetailedPortStatus LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.4

A table of the switch's SNMP Config entries

agentSnmpCommunityConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.6.2.1

Switch's SNMP Config entry

Indexes

agentSnmpCommunityIndex

Column	Syntax	OID
agentSnmpCommunityIndex The switch's Snmp Community Index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.1
agentSnmpCommunityName The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entr…	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.2
agentSnmpCommunityIPAddress The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.3
agentSnmpCommunityIPMask The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.4
agentSnmpCommunityAccessMode The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access a…	Enumerationr/w Enumerated Values: 1 read-only 2 read-write	.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.5
agentSnmpCommunityStatus The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according to its …	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 config 4 destroy	.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.6

Trap messages are sent across a network to an SNMP Network Manager. 
These messages alert the manager to events occurring within the switch 
or on the network. Up to six simultaneous trap receivers are supported.

agentSnmpTrapReceiverConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.6.4.1

Switch's Snmp Trace Receiver Config entry

Indexes

agentSnmpTrapReceiverIndex

Column	Syntax	OID
agentSnmpTrapReceiverIndex The switch's Snmp Trap Receiver Index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.1
agentSnmpTrapReceiverCommunityName The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.2
agentSnmpTrapReceiverIPAddress IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.3
agentSnmpTrapReceiverStatus The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInS…	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 config 4 destroy	.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.4

The switch's address aging timeout table

agentSwitchAddressAgingTimeoutEntry row .1.3.6.1.4.1.4526.1.6.1.2.8.4.1

Aging information about a specific Filtering Database.

Indexes

Q-BRIDGE-MIBdot1qFdbId

Column	Syntax	OID
agentSwitchAddressAgingTimeout The FDB entry's address aging timeout (in seconds)	Integer32r/w Constraints: range: 10-1000000	.1.3.6.1.4.1.4526.1.6.1.2.8.4.1.1

The Multicast Forwarding Database table

agentSwitchMFDBEntry row .1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1

Contains Forwarding and Filtering information per Vlan Index, MAC Address, and
Component User.

Indexes

agentSwitchMFDBVlanId agentSwitchMFDBMacAddress agentSwitchMFDBProtocolType

Column	Syntax	OID
agentSwitchMFDBVlanId Vlan Index for which this entry is associated with.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.1
agentSwitchMFDBMacAddress A multicast MAC address for which the switch has forwarding and or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.2
agentSwitchMFDBProtocolType The component that is responsible for this entry in the Multicast Forwarding Database.	Enumeration Enumerated Values: 1 static 2 gmrp 3 igmp	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.3
agentSwitchMFDBType This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.4
agentSwitchMFDBDescription Text description of this multicast table entry.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.5
agentSwitchMFDBForwardingPortMask BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTa…	GSM7312-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.6
agentSwitchMFDBFilteringPortMask BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTab…	GSM7312-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.7

The Multicast Forwarding Database Summary table

agentSwitchMFDBSummaryEntry row .1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1

Summarizes the forwarding ports for all components registered for all
MFDB table entries with the same Vlan Index and MAC Address.

Indexes

agentSwitchMFDBSummaryVlanId agentSwitchMFDBSummaryMacAddress

Column	Syntax	OID
agentSwitchMFDBSummaryVlanId Vlan Index for which this entry is associated with.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.1
agentSwitchMFDBSummaryMacAddress A multicast MAC address for which the switch has forwarding and or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.2
agentSwitchMFDBSummaryForwardingPortMask Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfig…	GSM7312-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.3

This table provides 802.3ad link aggregation information for each
physical port that is not available through the standard MIB.

agentDot3adAggPortEntry row .1.3.6.1.4.1.4526.1.6.1.2.12.1

Information about a table entry. The agentDot3adAggPort identifies
the external interface number of the port.

Indexes

agentDot3adAggPort

Column	Syntax	OID
agentDot3adAggPort ifIndex of this physical port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.12.1.1
agentDot3adAggPortLACPMode Enable/disable 802.3ad LACP on this port	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.12.1.2

A table of the switch's physical port config entries

agentPortConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.13.1

Switch's physical port config entry

Indexes

agentPortDot1dBasePort

Column	Syntax	OID
agentPortDot1dBasePort The port number of this port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.4526.1.6.1.2.13.1.1
agentPortIfIndex The switch's Port IfIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.13.1.2
agentPortIanaType The switch's Port Type	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.4.1.4526.1.6.1.2.13.1.3
agentPortSTPMode The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particu…	Enumerationr/w Enumerated Values: 1 dot1d 2 fast 3 off	.1.3.6.1.4.1.4526.1.6.1.2.13.1.4
agentPortSTPState The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.	Enumeration Enumerated Values: 1 blocking 2 listening 3 learning 4 forwarding 5 disabled	.1.3.6.1.4.1.4526.1.6.1.2.13.1.5
agentPortAdminMode The switch's Port Admin Mode	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.13.1.6
agentPortPhysicalModeobsolete The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports	Enumerationr/w Enumerated Values: 1 auto-negotiate 2 half-10 3 full-10 4 half-100 5 full-100 6 half-100fx 7 full-100fx 8 full-1000sx	.1.3.6.1.4.1.4526.1.6.1.2.13.1.7
agentPortPhysicalStatusobsolete The switch's Port Physical Speed Status. This is the current actual speed.	Enumeration Enumerated Values: 1 auto-negotiate 2 half-10 3 full-10 4 half-100 5 full-100 6 half-100fx 7 full-100fx 8 full-1000sx	.1.3.6.1.4.1.4526.1.6.1.2.13.1.8
agentPortLinkTrapMode If enabled, link up and link down traps will be sent for this port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.13.1.9
agentPortClearStats clear stats for this port only	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.13.1.10
agentPortDefaultType This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as th…	ObjectIdentifierr/w	.1.3.6.1.4.1.4526.1.6.1.2.13.1.11
agentPortType This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object iden…	ObjectIdentifier	.1.3.6.1.4.1.4526.1.6.1.2.13.1.12
agentPortAutoNegAdminStatus This object identifies the administration status of auto negotiation for this port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.13.1.13
agentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.13.1.14
agentPortDVlanTagMode Controls the Double Vlan Tag mode on this port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.13.1.15
agentPortDVlanTagEthertype Configures the Ethertype for the Double Vlan Tag for this port. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.4526.1.6.1.2.13.1.16
agentPortDVlanTagCustomerId Configures the Customer ID for the Double Vlan Tag for this port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.13.1.17
agentPortMaxFrameSizeLimit This object identifies the largest value that can be configured for agentPortMaxFrameSize	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.13.1.18
agentPortMaxFrameSize This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.13.1.19

A table of the switch's Protocol-based VLAN entries

agentProtocolGroupEntry row .1.3.6.1.4.1.4526.1.6.1.2.14.2.1

Switch's Protocol-based VLAN entry

Indexes

agentProtocolGroupId

Column	Syntax	OID
agentProtocolGroupId Group identifier of the Protocol-based VLAN entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.1
agentProtocolGroupName Group name of the Protocol-based VLAN entry.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.2
agentProtocolGroupVlanId VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.3
agentProtocolGroupProtocolIP The status of the IP protocol association with the Protocol-based VLAN entry.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.4
agentProtocolGroupProtocolARP The status of the ARP protocol association with the Protocol-based VLAN entry.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.5
agentProtocolGroupProtocolIPX The status of the IPX protocol association with the Protocol-based VLAN entry.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.6
agentProtocolGroupStatus The status of the Protocol-based VLAN entry. active(1) - this entry is active destroy(6) - remove this entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.7

A table of the switch's physical port config entries

agentProtocolGroupPortEntry row .1.3.6.1.4.1.4526.1.6.1.2.14.3.1

Switch's physical port config entry

Indexes

agentProtocolGroupId agentProtocolGroupPortIfIndex

Column	Syntax	OID
agentProtocolGroupPortIfIndex The interface number of this instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.1.6.1.2.14.3.1.1
agentProtocolGroupPortStatus The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.14.3.1.2

STP port table.

agentStpPortEntry row .1.3.6.1.4.1.4526.1.6.1.2.15.7.1

STP port entry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
agentStpPortState The administrative bridge port state. enable(1) - enables the port. disable(2) - disables the port. The default port state is enabled for the first 4095 ports and disabled for any ports b…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.1
agentStpPortStatsMstpBpduRx The MSTP BPDUs received on a specific port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.2
agentStpPortStatsMstpBpduTx The MSTP BPDUs sent from a specific port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.3
agentStpPortStatsRstpBpduRx The RSTP BPDUs received on a specific port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.4
agentStpPortStatsRstpBpduTx The RSTP BPDUs sent from a specific port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.5
agentStpPortStatsStpBpduRx The STP BPDUs received on a specific port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.6
agentStpPortStatsStpBpduTx The STP BPDUs sent from a specific port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.7
agentStpPortUpTime Time since port was reset. It is displayed in days, hours, minutes, and seconds.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.8
agentStpPortMigrationCheck Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates th…	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.9

CIST port table.

agentStpCstPortEntry row .1.3.6.1.4.1.4526.1.6.1.2.15.9.1

CIST port entry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
agentStpCstPortOperEdge The MSTP operational status of a specific port for the CIST.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.1
agentStpCstPortOperPointToPoint The MSTP operational point to point mac of a specific port for the CIST.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.2
agentStpCstPortTopologyChangeAck The MSTP topology change acknowledge for a specific port in the CIST.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.3
agentStpCstPortEdge The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.4
agentStpCstPortForwardingState The MSTP forwarding state of a specific port in CIST.	Enumeration Enumerated Values: 1 discarding 2 learning 3 forwarding 4 disabled 5 manualFwd 6 notParticipate	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.5
agentStpCstPortId The MSTP port identifier of a specific port in CIST.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.6
agentStpCstPortPathCost The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.	Unsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.7
agentStpCstPortPriority The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.	Unsigned32r/w Constraints: range: 0-240	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.8
agentStpCstDesignatedBridgeId The MSTP designated bridge ID of a specific port in CIST.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.9
agentStpCstDesignatedCost The MSTP designated cost of a specific port in CIST.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.10
agentStpCstDesignatedPortId The MSTP designated port ID of a specific port in CIST.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.11

MST table.

agentStpMstEntry row .1.3.6.1.4.1.4526.1.6.1.2.15.10.1

MST entry.

Indexes

agentStpMstId

Column	Syntax	OID
agentStpMstId The MSTP instance ID.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.1
agentStpMstBridgePriority The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768.	Unsigned32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.2
agentStpMstBridgeIdentifier The MSTP bridge identifier in a specific instance.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.3
agentStpMstDesignatedRootId The MSTP designated root bridge identifier in a specific instance.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.4
agentStpMstRootPathCost The MSTP root path cost in a specific instance.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.5
agentStpMstRootPortId The MSTP root port ID in a specific instance.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.6
agentStpMstTimeSinceTopologyChange The MSTP time since the last topology change in a specific instance.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.7
agentStpMstTopologyChangeCount The MSTP count of topology changes in a specific instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.8
agentStpMstTopologyChangeParm The MSTP topology change parameter in a specific instance.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.9
agentStpMstRowStatus The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.10

MST port table.

agentStpMstPortEntry row .1.3.6.1.4.1.4526.1.6.1.2.15.11.1

MST port entry.

Indexes

agentStpMstId IF-MIBifIndex

Column	Syntax	OID
agentStpMstPortForwardingState The MSTP forwarding state of a specific port in a specific instance.	Enumeration Enumerated Values: 1 discarding 2 learning 3 forwarding 4 disabled 5 manualFwd 6 notParticipate	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.1
agentStpMstPortId The MSTP port identifier of a specific port in a specific instance.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.2
agentStpMstPortPathCost The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.	Unsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.3
agentStpMstPortPriority The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128.	Unsigned32r/w Constraints: range: 0-240	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.4
agentStpMstDesignatedBridgeId The MSTP designated bridge ID of a specific port in a specific instance.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.5
agentStpMstDesignatedCost The MSTP designated cost of a specific port in a specific instance.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.6
agentStpMstDesignatedPortId The MSTP designated port ID of a specific port in a specific instance.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.7

MST VLAN table.

agentStpMstVlanEntry row .1.3.6.1.4.1.4526.1.6.1.2.15.12.1

MST VLAN entry.

Indexes

agentStpMstId Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
agentStpMstVlanRowStatus The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.15.12.1.1

MST VLAN table.

agentAuthenticationListEntry row .1.3.6.1.4.1.4526.1.6.1.2.16.2.1

MST VLAN entry.

Indexes

agentAuthenticationListIndex

Column	Syntax	OID
agentAuthenticationListIndex Authenticaiton List Index Unique number used for indexing into this table.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.1
agentAuthenticationListName Authenticaiton List Name Unique name used to identify the Authentication List from other tables.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.2
agentAuthenticationListMethod1 Authenticion List Method 1 Configures the first authentication method to use when this list is specified.	Enumerationr/w Enumerated Values: 1 local 2 radius 3 reject	.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.3
agentAuthenticationListMethod2 Authenticion List Method 2 Configures the second authentication method to use when this list is specified.	Enumerationr/w Enumerated Values: 1 undefined 2 local 3 radius 4 reject	.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.4
agentAuthenticationListMethod3 Authenticion List Method 3 Configures the third authentication method to use when this list is specified.	Enumerationr/w Enumerated Values: 1 undefined 2 local 3 radius 4 reject	.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.5
agentAuthenticationListStatus The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.6

User Authentication Config Table

agentUserAuthenticationConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.16.4.1

User Authentication Config Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentUserAuthenticationList User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.4526.1.6.1.2.16.4.1.1

User Port Config Table

agentUserPortConfigEntry row .1.3.6.1.4.1.4526.1.6.1.2.16.5.1

User Port Config Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentUserPortSecurity User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable.	GSM7312-REF-MIBAgentPortMaskr/w	.1.3.6.1.4.1.4526.1.6.1.2.16.5.1.1

A table that contains information about the 802.1p priority
mapping to traffic class priority queue for every physical port.

agentClassOfServiceEntry row .1.3.6.1.4.1.4526.1.6.1.2.17.1.1

A 802.1p priority mapped to a traffic class priority queue.

Indexes

agentClassOfServicePriority

Column	Syntax	OID
agentClassOfServicePriority The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. …	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.4526.1.6.1.2.17.1.1.1
agentClassOfServiceClass Traffic class priority queue the received frame is mapped to.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.4526.1.6.1.2.17.1.1.2